679548
93
Zoom out
Zoom in
Previous page
1/104
Next page
Others
93
VQT1X17
LCD monitor
The LCD monitor turns off although the camera is turned on.
When the camera is not operated for a while, [POWER SAVE] or [AUTO LCD OFF] is
activated for [ECONOMY]. (P22)
If the LCD monitor turns off when you press the shutter button halfway, the batteries may
run out.
The LCD monitor darkens during use.
This camera automatically charges for ash recording and may darken the LCD monitor
for ef cient charge. The monitor may darken in the following cases;
– After ash recording
– Just after turning the camera ON
– Just after setting to Recording Mode
When adjusting the zoom or pointing the camera toward dark side
The LCD monitor lights up again to return to recording-ready condition after charging for ash.
The LCD monitor becomes darker or brighter for a moment.
This phenomenon appears when pressing the shutter button halfway to set the aperture
value and does not affect the recorded pictures.
This phenomenon also appears when the brightness changes when the camera is
zoomed or moved. This is because of operation of the automatic aperture of the camera,
and it is not a malfunction.
The LCD monitor ickers indoors.
The LCD monitor may icker for a few seconds after turning the camera on indoors
under uorescent light. This is not a malfunction.
The LCD monitor is too bright or dark.
Is the [POWER LCD] or the [HIGH ANGLE] mode activated? (P22)
Black, red, blue and green dots appear on the LCD monitor.
This is not a malfunction. These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
In dark places, noise may appear to maintain the brightness of the LCD monitor. This
does not affect the pictures you are recording.
Uneven colours come on the LCD monitor.
If you press the LCD monitor with excessive force, uneven colours may appear on it.
Flash
Flash is not activated.
• Is the ash setting set to Forced OFF [
o
]?
Change the ash setting. (P36)
Flash Mode is not available when [BURST] (P58) in [REC] menu has been set.
Flash is not available depending on Scene Mode. (P37)
The ash is activated 2 times.
• The ash is activated twice when Red-eye Reduction (P36) has been set.
VQT1X17_DMC-LS85_EB_EN.indb 93VQT1X17_DMC-LS85_EB_EN.indb 93 2008/12/24 18:25:552008/12/24 18:25:55
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-LS86 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-LS86 in the language / languages: English as an attachment in your email.

The manual is 21,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-LS86

Panasonic DMC-LS86 User Manual - English - 137 pages

Panasonic DMC-LS86 User Manual - German - 137 pages

Panasonic DMC-LS86 User Manual - Dutch - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info