679548
90
Zoom out
Zoom in
Previous page
1/104
Next page
Others
90
VQT1X17
[MEMORY CARD ERROR FORMAT THIS CARD?]
This card has a format which is not recognised by the camera.
Format the card again with the camera after saving necessary data on a PC etc. (P24)
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]
This message appears when the camera is not operating properly.
Turn the camera off and on. If the message persists, contact the dealer or your
nearest Service Centre.
[MEMORY CARD PARAMETER ERROR]
Use a card compatible with this camera. (P15)
You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.
[MEMORY CARD ERROR PLEASE CHECK THE CARD]
Failed access to the card.
Insert the card again.
Insert a different card.
[READ ERROR PLEASE CHECK THE CARD]/
[WRITE ERROR PLEASE CHECK THE CARD]
It has failed to read or write data.
Turn the camera off and remove the card. Insert the card again, turn the power on,
and try to read or write the data again.
The card may be broken.
Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
When you set the picture quality to [WVGA] or [VGA], we recommend using a high-
speed card with “10 MB/s” or greater displayed on the package.
If the operation stops even if you use the card with memory size of 10 MB/s or greater,
this means the data-writing speed become lowered. We recommend backing up the data
and formatting the card. (P24)
Depending on the type of SD Memory Card or SDHC Memory Card, motion picture
recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there are no remaining folder numbers that can be
used. (P76)
Format the card after saving necessary data on a PC etc. (P24)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
The AV cable is connected to the camera.
Press [MENU/SET] if you want to delete this message at once.
Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P23)
This message also appears when the USB connection cable is connected to the camera
only. In this case, connect the other end of the USB connection cable to a PC or a
printer. (P75, 77)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
The printer cannot print.
Check the printer.
VQT1X17_DMC-LS85_EB_EN.indb 90VQT1X17_DMC-LS85_EB_EN.indb 90 2008/12/24 18:25:552008/12/24 18:25:55
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-LS86 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-LS86 in the language / languages: English as an attachment in your email.

The manual is 21,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-LS86

Panasonic DMC-LS86 User Manual - English - 137 pages

Panasonic DMC-LS86 User Manual - German - 137 pages

Panasonic DMC-LS86 User Manual - Dutch - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info