Connecting to other equipment
- 99 -
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• You can easily print out or mail the pictures you have imported. Use of the
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way
of doing this.
• Read the separate operating instructions for the supplied software for more information
about the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
1
Connect the camera to a PC via the USB connection cable
A
(supplied).
• Do not use any other USB connection cables except the supplied one.
A
USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bent out of shape which will cause trouble.)
B
Align the marks, and insert.
• Use batteries with sufcient battery power or the AC adaptor (DMW-AC6PP for DMC-
LS85PU/DMC-LS86PU, DMW-AC6E for DMC-LS85EG/DMC-LS85EP: optional: P110)
and DC coupler (DMW-DCC2: optional: P110). If the remaining battery power becomes
low while the camera and the PC are communicating, the status indicator blinks and the
alarm beeps.
Refer to “Disconnecting the USB connection cable safely” (P101) before disconnecting
the USB connection cable. Otherwise, data may be destroyed.
• Always use a genuine Panasonic AC adaptor (DMW-AC6PP for DMC-LS85PU/DMC-
LS86PU, DMW-AC6E for DMC-LS85EG/DMC-LS85EP: optional) and DC coupler (DMW-
DCC2: optional).