452173
188
Zoom out
Zoom in
Previous page
1/200
Next page
VQT3A48
188
Others
If recording under fluorescent light, the brightness or the hue may change slightly when the
shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not
a malfunction.
Colour or brightness of the screen may change or horizontal streaks may appear on the screen
when the picture is taken under extremely bright light, or under fluorescent lamps, mercury
lamps, or sodium lamps etc.
This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It appears
when the subject has a bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recommended that you take pictures while taking care not to expose the screen to sunlight
or any other source of strong light.
This could be an inactive pixel. Perform the [PIXEL REFRESH] (P135) in the [CUSTOM] menu.
Are you in Exposure Compensation operation?
> Press the rear dial to switch to Exposure Compensation operation. (P76)
Set the AF area to the distinctive colour of the subject if there is a part that is different from the
surrounding colour. (P83)
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures
in [MOTION JPEG].
Depending on the type of the card, recording may stop in the middle.
>
If motion picture recording stops during use of a card of at least “Class 4” or if you use a card
on which recording and deleting have been repeated many times, or a card that has been
formatted on a PC or other equipment, the data-writing speed is lower. In such cases, we
recommend that you make a backup of the data and then format (P63) the card in this unit.
When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
The brightness or the hue of the recorded picture is different from the actual
scene.
Reddish horizontal streaks appear on the LCD monitor during recording.
Bright spot not in subject is recorded.
You cannot compensate the exposure.
Subject cannot be locked.
(AF tracking not possible)
Motion pictures
Motion picture recording stops in the middle.
When recording a motion picture, the screen may go dark.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 188 ページ 2010年10月14日 木曜日 午後3時50分
188


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-GH2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-GH2 in the language / languages: English as an attachment in your email.

The manual is 18,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-GH2

Panasonic DMC-GH2 User Manual - German - 200 pages

Panasonic DMC-GH2 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info