679617
181
Zoom out
Zoom in
Previous page
1/196
Next page
181
VQT2G56
Others
This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It appears
when the subject has a bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
It is recommended that you take pictures while taking care not to expose the screen to sunlight
or any other source of strong light.
This could be an inactive pixel. Perform the [PIXEL REFRESH] (P131) in the [CUSTOM
MENU].
Are you in Exposure Compensation operation?
> Press the rear dial to switch to Exposure Compensation operation. (P66)
Set the AF area to the distinctive colour of the subject if there is a part that is different from the
surrounding colour. (P73)
It is recommended to use a card with SD Speed Class
¢
with “Class 6” or higher when recording
motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
Depending on the type of the card, recording may stop in the middle.
> When you set the picture quality to [ ], [ ] or [ ], we recommend using a
high-speed card with “10MB/s” or greater displayed on the package.
> If motion picture recording stops during use of a card of at least “10MB/s” or if you use a
card that has been formatted on a PC or other equipment, the data-writing speed is lower.
In such cases, we recommend that you make a backup of the data and then format (P38)
the card in this unit.
Object seems to be warped slightly when the object moves across the image very fast, but this
is because the unit is using MOS for the image sensor. This is not a malfunction.
This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
If there is marked flicker or striping when recording motion pictures in regions with a 60 Hz
mains supply, set the Flicker Reduction Function (P106) to [ON]. The Flicker Reduction
Function will then activate, automatically adjusting the shutter speed to 1/120.
Reddish horizontal streaks appear on the LCD monitor during recording.
Bright spot not in subject is recorded.
You cannot compensate the exposure.
Subject cannot be locked.
(AF tracking not possible)
Motion pictures
Motion picture recording stops in the middle.
Object seems to be warped.
Under fluorescent lighting, flicker or horizontal bars may be seen.
DMC-GF1EB-VQT2G56_eng.book 181 ページ 2009年8月25日 火曜日 午後6時59分
181


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-GF1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-GF1 in the language / languages: English as an attachment in your email.

The manual is 66,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-GF1

Panasonic DMC-GF1 User Manual - German - 196 pages

Panasonic DMC-GF1 User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info