679617
173
Zoom out
Zoom in
Previous page
1/196
Next page
173
VQT2G56
Others
Before cleaning the camera, remove the battery or disconnect the power plug from
the outlet. Then wipe the camera with a dry soft cloth.
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,
and then with a dry cloth.
Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth.
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
camera, since it may deteriorate the external case or the coating may peel off.
When using a chemical cloth, be sure to follow the accompanying instructions.
About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
Do not change lenses where there is a lot of dust, and always attach the body cap when a
lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
Remove any dirt on the body cap before attaching it.
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
Blow off the dust on the surface of the image sensor with a commercially available blower
brush. Be careful not to blow too strongly.
Do not put the blower brush further inside than the lens mount.
Do not let the blower brush touch the image sensor as the image sensor may get scratched.
Do not use any objects except a blower brush to clean the image sensor.
If you cannot remove the dirt or dust with the blower, consult the dealer or your nearest Service
Centre.
Do not press the LCD monitor with excessive force. Uneven colours may appear on the LCD
monitor and it may malfunction.
If the camera is cold when you turn it on, the picture on the LCD monitor/Optional external
viewfinder will be slightly darker than usual at first. However, the picture will return to normal
brightness when the internal temperature of the camera increases.
Cleaning
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that have
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [SENSOR CLEANING]
(P131) in the [CUSTOM MENU] menu.
About the LCD monitor/Optional external viewfinder
Extremely high precision technology is employed to produce the LCD monitor/Optional
external viewfinder screen. However there may be some dark or bright spots (red, blue
or green) on the screen. This is not a malfunction. The LCD monitor/Optional external
viewfinder screen has more than 99.99% effective pixels with a mere 0.01% of the
pixels inactive or always lit. The spots will not be recorded on pictures on a card.
DMC-GF1EB-VQT2G56_eng.book 173 ページ 2009年8月25日 火曜日 午後6時59分
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-GF1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-GF1 in the language / languages: English as an attachment in your email.

The manual is 66,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-GF1

Panasonic DMC-GF1 User Manual - German - 196 pages

Panasonic DMC-GF1 User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info