121313
33
Zoom out
Zoom in
Previous page
1/56
Next page
Panasonic
Basic
Operating
Instructions
Digital
Camera
Model No. DMC-FZ35
Before
connecting,
operating
or
adjusting
this
product,
please
read
the
instructions
completely.
Please also refer to Operating
Instructions (PDF format)
recorded
on
the CD-ROM
containing the Operating Instructions (supplied).
You
can learn about advanced operation methods
and check the Troubleshooting.
For USA and Puerto Rico assistance, please call' 1-800-211-PANA(7262)
or,
contact us via the web at: http://www.panasonlc.com/contactlnfo
VQT2G40
Dear Customer,
Thank
you
for
choosing
Panasonic!
You
have purchased one
of
the most sophisticated and reliable products
on
the market
today. Used properly, we're sure it will bring you and your family years
of
enjoyment.
Please take time to fill
in
the information on the below. The serial number
is
on the tag
located on the underside
of
your Camera. Be sure to retain
this
manual
as your
convenient Camera information source. Please note that the actual controls and
components, menu items, etc.
of
your Digital Camera may look somewhat different from
those shown
in
the illustrations
in
these Operating Instructions.
Carefully
observe
copyright
laws.
Recording of pre-recorded tapes or discs or other published or broadcast material for purposes
other than your
own
private
use
may infringe copyright laws.
Even
for the purpose of private
use,
recording of certain material may
be
restricted.
Model No.
Serial No.
A lithium ion battery that
is
recyclable powers the product you have
purchased. Please call 1-800-8-BATTERY for information
on
how to
recycle this battery.
Information
for
Your
Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK
OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING
AND
THAT NO
OBJECTS
FILLED WITH LIQUIDS, SUCH
AS
VASES,
SHALL
BE
PLACED
ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR
BACK);
THERE
ARE
NO USER
SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom
of
units.
2 VQT2G40 (ENG)
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15
of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses, and
can
radiate radio frequency energy and, if not installed and
used
in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is
no
guarantee that interference will not occur
in
a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which
can
be
determined by turning the equipment off and
on,
the user
is encouraged to try to correct the interference by one or more
of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and
receiver.
Connect the equipment into
an
outlet
on
a circuit different from that
to
which the receiver is
connected.
Consult the dealer or
an
experienced radiolTV technician for help.
FCC Caution:
To
assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite core when
connecting to computer or peripheral devices.
Any changes
or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-FZ35
Responsible party: Panasonic Corporation
of
North America One Panasonic Way,
Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Panasonic
DMC-FZ35
(ENG) VQT2G40 3
About the battery pack
CAUTION
Battery pack (Lithium ion battery pack)
Use the specified unit
to
recharge the battery pack.
Do
not use the battery pack with equipment other than the specified unit.
Do
not get dirt, sand, liquids, or other foreign matter
on
the terminals.
Do
not touch the plug terminals
(+
and
-)
with metal objects.
Do
not disassemble, remodel, heat or throw into fire.
If
any
electrolyte should come into contact with
your
hands or clothes, wash it off
thoroughly with water.
If any electrolyte should come into contact with your eyes,
never
rub the eyes. Rinse
eyes thoroughly with water, and then consult a doctor.
CAUTION
Danger
of
explosion
if
battery
is
incorrectly replaced. Replace only with the same
or
equivalent type recommended by the manufacturer. Dispose
of
used batteries
according to the manufacturer's instructions.
Do
not heat
or
expose
to
flame.
Do
not leave the battery(ies)
in
an
automobile exposed
to
direct sunlight for a long period of
time with doors
and
windows closed.
Warning
Risk
of fire, explosion
and
burns.
Do
not disassemble, heat above 60°C
(140
OF)
or
incinerate.
About the battery charger
CAUTION!
DO
NOT INSTALL OR PLACE THIS UNIT
IN
A BOOKCASE, BUILT·IN CABINET OR
IN
ANOTHER CONFINED SPACE. ENSURE THE UNIT
IS
WELL VENTILATED.
TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE
TO
OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.
Battery charger
This battery charger operates on AC between 110 V and 240
V.
But
·In
the U.S.A. and Canada,
the
battery charger must
be
connected
to
a 120 V
AC
power
supply
only.
When connecting
to
an
AC
supply outside of
the
U.S.A. or Canada,
use
a
plug
adaptor
to
suit the
AC
outlet configuration.
4 VQT2G40 (ENG)
Cautions
for
Use
Do not use any other
AV
cables except the supplied one.
Do not use any other cables except a genuine Panasonic HOMI mini cable (RP-COHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
Do not use any other USB connection cables except the supplied one.
Keep the camera as
far
away as possible
from
electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
If you use the camera on top
of
or near a
TV,
the pictures and sound on the camera may
be
disrupted by electromagnetic wave radiation.
Do not use the camera near cell phones because doing so may result in noise adversely
affecting the pictures and sound.
Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers
or
large motors.
Electromagnetic wave radiation generated by microprocessors may adversely affect the
camera, disturbing the pictures and sound.
If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor (OMW-AC7PP;
optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on.
Do
not
use the camera near radio transmitters
or
high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may
be adversely affected.
(ENG) VQT2G40 5
Care
of
the
camera
Do
not
strongly
shake
or
bump
the
camera
by
dropping
or
hitting
it.
Do
not
subject
to
strong
pressure.
The camera may malfunction, recording pictures may become impossible, or the lens, the LCD
monitor or the external case may
be
damaged.
Do
not
touch
the
lens
or
the
sockets
with
dirty
hands.
Also,
be
careful
not
to
allow
liquids,
sand
and
other
foreign
matter
to
get
into
the
space
around
the
lens,
buttons
etc.
Retract the lens before carrying the camera or playing back pictures.
Be
particularly
careful in
the
following
places as
they
may
cause
this
unit
to
malfunction.
- Places with a lot
of
sand or dust.
- Places where water can come into contact with this unit such as when using it on a rainy day
or
on
a beach.
This
camera
is
not
waterproof.
If
water
or
seawater
splashes
on
the
camera, use a
dry
cloth
to
wipe
the
camera
body
carefully.
If
the
unit
does
not
operate normally, please
contact
the
dealer
where
you
purchased the
camera
or
the
repair
service
center
.
About
Condensation
(When
the
lens
or
the
Viewfinder
is
fogged
up)
Condensation occurs when the ambient temperature or humidity changes.
Be
careful
of
condensation since it causes lens stains, fungus and camera malfunction.
If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature
of
the camera becomes close to the ambient
temperatu
re.
6 VQT2G40 (ENG)
4GB
OK
;';sij~
c:EJ
.
4GB
About cards that can
be
used
in
this unit
You can use an
SO
Memory Card and SOHC
Memory
Card.
When the term
card
is used
in
these operating instructions this refers to the following types of
Memory Cards.
-
SO
Memory Card
(8
MB
to 2 GB)
- SOHC Memory Card
(4
GB
to
32
GB)
More specific information about memory cards that can be used with this unit.
You
can
only use
an
SOHC Memory Card if using cards with 4
GB
or
more capacity.
A 4
GB
(or more) Memory Card without
an
SOHC logo is not based
on
the
SO
Standard and will not work
in
this product.
Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Keep the Memory Card out of reach of children to prevent swallowing.
-If you see this symbol-
Information on Disposal
in
other Countries outside the
European Union
This symbol is only valid
in
the European Union.
If you wish to discard this product, please contact your local
authorities
or
dealer and ask for the correct method
of
disposal.
(ENG) VQT2G40 7
....................
j
Information for Your Safety 2
Before Use
Standard Accessories 9
Names of the Components 10
Preparation
Charging the Battery 13
About the Battery Life 14
Inserting and Removing the Card (optional)/the
Battery 16
Setting DatefTime (Clock Set) 17
Changing the clock setting 17
Setting the Menu 18
Setting menu items 18
Basic
Selecting the [REC] Mode
20
Taking pictures using the automatic function
(U!]:
Intelligent Auto Mode)
22
Scene detection
23
AF Tracking Function
23
Taking pictures
with
your favorite settings
([;1:
Program AE Mode)
24
Focusing _
24
Recording Motion Picture 25
Playing back Pictures ([NORMAL PLAY]) 27
Deleting
Pictures
28
To delete a single picture
28
To delete multiple pictures (up
to
50)
or
all
the pictures
28
Others
Reading the Operating Instructions
(PDF
format)
29
Specifications
30
Digital Camera Accessory System
34
Digital Camera Accessory Order Form
35
Request for Service Notice 36
Limited Warranty
37
Customer Services Directory
39
8 VQT2G40 (ENG)
Before Use
DE-A43B
VYK2U93
VFF0520
K1HA14CD0001
4
2
6
CGR-S006A
K1
HA14AD0001
3
1
5
Check that all the accessories are included before using the camera.
Product numbers correct as
of
July 2009. These may be subject to change.
1 Battery Pack
(Indicated as
battery
pack
or
battery
in
the text)
Charge the battery before use.
2 Battery Charger
(Indicated as
battery
charger
or
charger
in
the text)
3 USB Connection Cable
4 AV Cable
5 CD-ROM
Software:
Use
it
to
install
the
software
to
your
PC.
6 CD-ROM
Operating Instructions
7 Shoulder Strap
8 Lens Cap/Lens Cap String
9 Lens Hood
10 Hood Adaptor
SO
Memory
Card
and
SDHC
Memory
Card
are
indicated
as
card
in
the
text.
The card is optional.
You can record
or
play back pictures on the
built-in memory when you are
not
using a 7
card.
For information about optional accessories,
refer
to
the
"Digital Camera Accessory
System".
If any accessories
are
lost, customers should
contact Panasonic's
parts
department
at
1
800
833-9626 for further information about VFC4453
obtaining replacement parts.
I---------+-----------i
9
10
VYQ4122 VYQ4124
(ENG) VQT2G40 9
Before Use
(N~I11~~U
~ith~
c~l11p~~~~t~
I I
•••
a a
lUI
1 Lens
2 Flash
3 Self-timer indicator
AF assist lamp
4 Flash open button
5 Diopter adjustment dial
6 Viewfinder
7 Speaker
8 Motion picture button
9 [AF/AE LOCK] button
10 Joystick
1
6
2
)
3
10
11
The joystick
is
operated
in
two different ways: it can
be
moved
in
the up, down, left
and right directions to perform an operation,
or
it can
be
pressed to select.
In
these
operating instructions,
it
is
pictured as shown
in
the figure below or described with
J../T/"'/~.
Example: When the joystick
is
moved
toward ... (left)
Place your finger on the right side of the
\.
~
.•
¢
@)
joystick, and move the joystick toward
,,\
the left.
or
Move'"
Push the joystick straight
in.
\.
t
®
¥¥
,,'
¢
or Press
10 VQT2G40 (ENG)
Before Use
11
[REC]/[PLAYBACK] selector switch
12 LCD monitor
13 [EVF/LCD] button
14 [DISPLAY] button
15 Delete buttonl
Single or Burst Mode button
16
[MENU/SET] button
17
Cursor buttons
...1 Self-timer button
TI
Function button
Assign [REC] Mode menu to T button.
It
is
convenient
to
register [REC] Mode
menu that
is
used often.
[REVIEW]/[SENSITIVITY]/[WHITE BALANCE]/[METERING MODE]/[AF MODE]I
[I.EXPOSURE]
~
I Flash setting button
J..I
Exposure compensationl
Auto Bracket/Color Bracket/Flash output adjustment
In
these operating instructions, the cursor buttons are described as shown
in
the
figure below or described with
J../T/"'/~.
e.g.: When you press the T (down) button
18 Stereo microphone
19 Zoom lever
20 Shutter button
21
[FOCUS] button
22 Mode dial
23 Camera ON/OFF switch
24 Power lamp
25
[AF/AF~/MF]
button
or
Press T
(ENG) VQT2G40
11
Before Use
26
Shoulder
strap eyelet
Be
sure to attach the shoulder strap when
using the camera to ensure that
you
will
not drop
it.
27 [HDMI] socket
28 [DC IN] socket
Always use a genuine Panasonic
AC
adaptor (DMW-AC7PP; optional).
This camera cannot charge the battery
even when the
AC
adaptor (DMW-AC7PP;
optional)
is
connected to
it.
29
Terminal
door
30 [DIGITAL/AV OUT] socket
26
27
28
"---29
30
31
Tripod receptacle
When you use a tripod, make sure the tripod
is
stable when the camera
is
attached to
it.
32 Card/Battery
door
33 Lens barrel
12 VQT2G40 (ENG)
o
31
32
..
mil
Preparation
About
batteries
that
you
can use
with
this
unit
The battery
that
can be used
with
this
unit
is CGR-S006A.
It
has been
found
that
counterfeit
battery packs
which
look
very
similar
to
the
genuine
product
are made available
to
purchase in some markets. Some
of
these
battery packs are
not
adequately protected
with
internal
protection
to
meet the
requirements
of
appropriate safety standards. There
is
a
possibility
that
these
battery packs may lead
to
fire
or
explosion. Please be advised
that
we are
not
liable
for
any
accident
or
failure
occurring
as a result
of
use
of
a counterfeit
battery pack.
To
ensure
that
safe products are used we
would
recommend
that
a
genuine Panasonic battery pack is used.
Use the dedicated
charger
and battery. The quality,
performance
and
safety
ofthird
party
batteries
other
than
those
that
are
genuine
are
not
guaranteed.
The battery is
not
charged
when the camera is
shipped.
Charge
the
battery
before use.
Charge the battery with the charger indoors.
Charge the battery
in
a temperature between
10°C
to 35
°C
(50
of
to 95
OF).
(The battery
temperature should also be the same.)
oAttach the battery paying
attention
to
the
direction
of
the
battery.
f)
Connect
the
charger
to
the
electrical outlet.
Charging starts when the [CHARGE]
indicator
® lights green.
Charging is complete when the
[CHARGE] indicator
® turns off.
mDetach
the
battery after
charging
is
completed.
(ENG) VQT2G40 13
Preparation
Charging
_'-
A_p_p_ro_x_,_1_2_0_m_in
_
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending
on
how the battery has been used. The charging
time for the battery
in
hot/cold environments or a battery that has not been used for long
time may be longer than normal.
eNote
After charging
is
completed, be sure to disconnect the power supply device from the electrical
outlet.
The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This
is
not a malfunction.
The battery will become discharged if left for a long period
of
time after being charged.
The battery can be recharged even when it still has some charge left, but it
is
not
recommended that the battery charge be frequently topped
up
while the battery is fully
charged. (The battery has characteristics that will reduce its operating duration and cause the
battery to swell up.)
When the operating time
of
the camera becomes extremely short even after properly charging
the battery, the life
of
the battery may have expired. Buy a new battery.
Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may
be
caused
by
short-circuiting or the
resulting heat generated.
Recording still pictures (When using the LCD monitorNiewfinder)
Number of recordable
pictures
Recording time
14 VQT2G40 (ENG)
Approx. 470 pictures
Approx. 235 min
(By CIPA standard
in
program
AE
Mode)
Preparation
Recording
motion
pictures (When using the LCD
monitorNiewfinder)
[AVCHD Lite] [MOTION JPEG]
(Recording
with
picture
quality
(Recording
with
picture
quality
set
to
[SH]([Mm
set
to
[HD)([liIm
Approx.
80
min*
Approx. 150
mint
Approx.
80
min
Approx. 150
min
Recording
conditions
by
CIPA standard
CIPA is an abbreviation
of
[Camera & Imaging Products Association].
Temperature:
23°C
(73.4 °F)/Humidity: 50% when LCD monitor
is
on. *
Using a Panasonic
SO
Memory Card (32 MB).
Using the supplied battery.
Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer
function
is
set to [AUTO].)
Recording once every
30
seconds with full flash every second recording.
Rotating the zoom lever from
Tele
to Wide or vice versa
in
every recording.
Turning the camera off every 10 recordings and leaving it until the temperature of the battery
decreases.
* The number of recordable pictures decreases
in
Auto Power LCD Mode and Power LCD
Mode.
The
number
of
recordable pictures varies depending on
the
recording interval time.
If
the recording interval time becomes longer, the
number
of
recordable pictures
decreases.
[e.g. When
recording
once every 2 minutes, the
number
of
recordable pictures
decreases
to
about
117.]
These are standard times taken at a temperature
of
23°C
(73.4
OF)
and a humidity of 50%.
The
time
available
for
recording varies depending on the environment, the interval
between
recordings,
and the manner
of
use.
Actual recordable time is the time available for recording when repeating actions such as
switching the power supply [ON] / [OFF], starting/stopping recording, zoom operation etc.
* Motion picture recorded continuously
in
[MOTION JPEG]
is
up to 2 GB. Only the maximum
recordable time for 2
GB
is
displayed
on
the screen.
Playback (When
using
the LCD
monitorNiewfinder)
_
Approx.
480 min
The
number
of
recordable
pictures
and
playback
time
will
vary
depending on the operating
conditions
and
storing condition
of
the battery.
(ENG) VQT2G40 15
Preparation
Inserting
and Removing the Card (optional)/the
Battery
Check that this unit is turned off.
Close the flash.
We
recommend using a Panasonic card.
oSlide the card/battery door to open it.
Always use genuine Panasonic batteries
(CGR-S006A).
If
you use other batteries, we cannot guarantee the
quality of this product.
mBattery: Insert until it
is
locked by
......
. the lever ® being careful about the
direction you insert it. Pull the lever
®
in
the direction
of
the arrow to
remove the battery.
Card: Push it fully until
it
clicks
being careful about the direction
you insert
it.
To
remove the card,
push the card until it clicks, then
pull the card out upright.
@: Do
not
touch the connection terminals
of
the card.
The card may
be
damaged if it is not fully
inserted.
ill O:Close the card/battery door.
8:Slide
the card/battery door to the end
and then close it firmly.
If the card/battery door cannot
be
completely
closed, remove the card, check
its
direction and
then insert it again.
16 VQT2G40 (ENG)
Preparation
)
mPress [MENU/SET].
® [MENU/SET] button
® Cursor buttons
The
clock
is
not
set when the camera is shipped.
oTurn the camera on.
The [PLEASE SET THE CLOCK] message
appears. (This message does not appear
in
[PLAYBACKj Mode.)
iJ
Press
~/~
to
select the items (year, month,
...
day, hour, minute,
display
sequence
or
time
display
format), and press
£./T
to
set.
fir
Cancel
without
setting the clock.
D Press [MENU/SET]
to
set.
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting" procedure
below.
Select [CLOCK SET] in the [REC]
or
[SETUP] menu, and press
~.
It can be changed
in
steps 3 and 4 to set the clock.
Once a charged battery has been installed
for
24 hours, the
clock
setting is maintained
for
3
months
using the built-in
clock
battery even
without
the battery.
(ENG) VQT2G40 17
Preparation
)
This camera offers menu selections that allow you to customize its operation to maximize
your picture taking experience.
In particular, the [SETUP] menu contains some important settings relating to the camera's
clock and power. Check the settings
of
this menu before proceeding to use the camera.
This section describes
how
to select the Program AE Mode settings, and the same setting
can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from
[~]
to
[~]
in
the Program AE Mode
./T
I
....
/~
in
the steps
can
be
operated with the joystick
too.
oTurn the camera on.
® [MENU/SET] button
® [REC]/[PLAYBACK] selector switch
© Mode dial
fJ Slide the [REC]/[PLAYBACK]
selector
switch
to
[0].
When selecting the [PLAYBACK] Mode menu
settings, set
the
[REC]/[PLAYBACK] selector switch
to
[IB],
and
proceed
to
step
4.
mSet
the
mode
dial
to
[~].
D Press [MENU/SET]
to
display
the
menu.
You
can
switch menu screens from any menu item
by
rotating the zoom lever.
18 VQT2G40 (ENG)
];' c',
~.~.
:1,
QUAUTY
;h
ffi
ASPECT
RATiO
Ell
[]Iso
INTELLIGENT
:SO
O'F
~
SENSITIWry
m1J
SELECT'~~EXIT
~
~
Preparation
Switching to the [SETUP] menu
1 Press
.....
(~
iii
P"crURE
SiZE
~
d,
QUAUTY
, rn
AS~ECT
RAT
0
,
[JIso
INTEl-LiGEN'T
i
SO
O"
[@]
SENSITlvnv
SELECT
",j:XIT
2
Press"
to
select the [SETUP]
menu icon
[~j.
3
Press~.
Select a menu item next and set
it.
g Press
A/T
to select [AF MODE].
Select the item at the very bottom, and
press"
to
move
to
the second screen.
iii
Press~.
Depending
on
the item, its setting may not appear or it
may
be
displayed
in
a different
way.
nPress
A/T
to select
[:.s;].
III Press [MENU/SET] to set.
mPress [MENU/SET] to close the menu.
o
CLOCK
SET
@
WORLD
TIME
ft
. iiJ
TRliVEL
DATE
I
~~~
~;1ME
,£\1,3
SELECT
"'-EXIT
;:\~
~.~.
til
TRAVEL
DATE
lll)
BEEP
F
!lJ~)
VOLUME
[[\,u3
SELECT
,,,,-EXIT
)
2.1
it..
~'S~
ISO
LIMIT
SET
Ainu
,
~
WHiTE
BALANCE
A\\Il
:.t~
FACE
RECOG.
OfF
-l~.
,
pM
PRE
AF
ON
SEi.£CT':~EXIT
(ENG) VQT2G40 19
Basic
Mode switching
Selecting
the
[REe]
Mode
DTurn the camera on.
® [REC]/[PLAYBACK] selector switch
The power lamp
e lights when you turn this
unit
on
O.
f)
Slide the [REC]/[PLAYBACK]
selector switch to
[0].
II
Switching the mode by rotating
the mode dial.
Align a desired mode with part
@.
Rotate the mode dial slowly and surely
to adjust to each mode. (The
mode
dial
rotates 360
0)
Basic
o
fB
Cia]
InteUigentauto mode
The subjects are recorded using settings automatically selected by the camera.
(;J
Program
AE
mode
The subjects are recorded using your own settings.
20 VQT2G40 (ENG)
Basic
Advanced
~
Aperture-priority AE mode
The shutter speed
is
automatically determined by the aperture value you set.
§ Shutter-priority AE mode
The aperture value
is
automatically determined by the shutter speed you set.
(liJ
Manual exposure mode
The exposure
is
adjusted by the aperture vaiue and the shutter speed which are
manually adjusted.
ell
Creative motion picture mode
Record motion picture with manual settings.
Ii
Custom mode
Use this mode to take pictures with previously registered settings.
III Scene mode
This allows you to take pictures that match the scene being recorded.
g My
Color
mode
Easily adjust color, brightness and saturation when taking a picture.
Advanced Scene Mode
C?J
Portrait mode
Use this mode to take pictures
of
people.
.
~
Scenery mode
Use this mode to take pictures of scenery.
i.1
Sports mode
Use this mode to take pictures of sporting events, etc.
~
Close-up mode
Use this mode to take pictures of a close-by subject.
~
Night portrait mode
Use this mode to take pictures of night scenes and people against night time scenery.
(ENG) VQT2G40
21
Basic
[REG] Mode:
~
Taking
pictures
using
the
automatic
function
(~:
Intelligent
Auto
Mode)
The
camera
will
set
the
most
appropriate settings to
match
the
subject and the recording
conditions
so
we
recommend
this
mode
for beginners
or
those
who
want
to leave the
settings
to
the
camera
and take pictures easily.
The following functions are activated automatically.
-Scene
detection/[STABILlZER]/[INTELLIGENT ISO]/Face detection/[QUICK AF]/
[I.EXPOSURE] (Intelligent Exposure)/Digital Red-eye Correction/Backlight Compensation
nSlide
the
[REC]/[PLAYBACK]
selector
switch
to
[0]·
B Set
the
mode
dial
to
[til].
11
Press
the
shutter
button
halfway
to
focus.
The focus indication
CD
(green) lights when the subject
is focused.
The AF area
®
is
displayed around the subject's face
by the Face Detection function.
In
other cases, it is
displayed at the point
on
the subject which
is
in
focus.
The focus range is 1
em
(0.04 feet) (Wide
)/1
m
(3.28 feet) (Tele) to
00.
The maximum close-up distance (the shortest distance
at which the subject can
be
taken) differs depending
on
the zoom magnification.
D Press
the
shutter
button
fully
(push
it
in
. further), and take the picture.
The
access indication lights
red
when
pictures
are
being
recorded
on
the
built-in memory (or
the
card).
Do
not
turn
this
unit
off, remove its
battery
or
card,
or
disconnect
the AC
adaptor
(DMW-AC7PP;
optional)
when
the
access
indication
is
lit
[when
pictures
are
being
written,
read
or
deleted,
or
the
built-in
memory
or
the
card
is
being
formatted].
Furthermore,
do
not
subject
the
camera
to
vibration,
impact
or
static
electricity.
The
card
or
the
data
on
the
card
may
be damaged,
and
this
unit
may
no
longer
operate
normally.
If
operation
fails
due
to
vibration,
impact
or
static
electricity,
perform
the
operation
again.
22 VQT2G40 (ENG)
Basic
, '
B,e.e
leleelialll ' , '
..
,"
.."
Only when
[~A]
is selected
I[iJ
[i-PORTRAIT]
IE!
[i-SCENERY]
~
[i-MACRO]
I(]
[i-NIGHT PORTR.AIT]
~
[i-NIGHT SCENERY]
1m
[i-BABY]*
When
the
camera
identifies
the
optimum
scene,
the
icon
of
the
scene
concerned
is
displayed
in
blue
for
2
seconds,
after
which
its
color
changes
to
the
usual
red.
1fl1~
[Ifll] is set
if
none
of
the scenes are applicable, and the standard settings are set.
When [!l:iJ],[I;1]
or
[fa]
is selected, the camera automatically detects a person's face, and it will
adjust the focus and exposure.
(Face detection)
If
a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the Scene Mode has been identified as
[B],
the shutter speed will be set to a maximum
of
8 seconds.Take care not to move the camera while taking pictures.
When [FACE RECOG.] is set to [ON], and the face similar to the registered face is detected, [R]
is displayed in the top right
of
[!l:iJ], [1;1] and
[fa].
* When [FACE RECOG.] is set to [ON],
[fa]
will be displayed for birthdays
of
registered faces
already set only when the face
of
a person 3 years old
or
younger is detected.
AF/AE
LOCK
8
2
Bring
the
subject
to
the
AF
tracking
frame, and
press
[AF/AE LOCK]
to
lock
the
subject
AF tracking frame will turn yellow.
An optimum scene for the specified subject will be
chosen.
Press [FOCUS] to cancel.
It
is
possible
to
set
the
focus
to
the
specified
subject.
Focus
will
keep
following
the
subject
automatically
even
if
it
moves.
1 Press [FOCUS].
[r~i:]
is displayed in the upper left
of
the screen.
AF Tracking frame is displayed
in
the center
of
the
screen.
Press [FOCUS] again to cancel.
(ENG) VQT2G40 23
Basic
[REG] Mode:
~
......
Taking
pictures
with
your
favorite
settings
((;.): Program AE Mode)
The camera automatically sets the shutter speed and the aperture value according to the
brightness
of
the subject.
You can take pictures with greater freedom by changing various settings in [REG] menu.
g Slide the [REC]/[PLAYBACK]
selector switch to
[0].
CJ
® Mode dial
® [REC]/[PLAYBACK] selector switch
fJ
Set the mode dial to
[~].
mAim the AF area at the point you
want to focus on.
D Press the shutter button halfway to focus.
The focus range
is
30
cm
(0.99 feet) (Wide)/2 m
(6.57 feet) (Tele) to
00.
II
Press the halfway pressed shutter button
fully to take a picture.
The access indication lights
red
when pictures are
being recorded
on
the built-in memory (or the card).
Aim the AF area
at
the subject, and then press the shutter button halfway.
Focus
When the subject is When the
su
bject
focused
is not focused
Focus indication
On
Blinks
AF area
White---'?Green
White---'?Red
Sound Beeps 2 times Beeps 4 times
® Focus indication
® AF area (normal)
© AF area (when using the digital zoom or when
it
is
dark)
24 VQT2G40 (ENG)
Basic
[REC] mode:
~~~[;JU!DIiJBlg~~aS2rl!g
Recording Motion Picture
This
can record high definition motion pictures compatible with the AVCHD
format
or
motion pictures recorded
in
Motion JPEG.
Audio
will be recorded in stereo.
Close the flash. (It is recommended that you close the flash when recording motion pictures.
However, leaving the flash open will not result
in
a significant difference
in
sound quality.)
D Slide the [REC]/[PLAYBACK] selector switch to
[OJ.
B Select the mode.
® Mode dial
® Motion picture button
Modes that can be used when recording a motion picture
Item Settings/Note
~
The camera will set the most appropriate settings to match
Intelligent Auto mode
the subject and the recording conditions, so you can leave
the settings to the camera and take motion pictures easily.
~/rl1/[;]/fi!i)
mode
Record motion pictures by automatically setting aperture
and shutter speed.
em
Creative motion picture Record motion pictures by manually setting aperture and
mode shutter speed.
E
Custom mode
Record motion pictures with selected custom mode
settings.
m
Scene mode
Record motion pictures that match the scene being
recorded.
rJ
[PORTRAln
Record motion pictures with settings suitable for portraits.
E!
[SCENERY] Record motion pictures with settings suitable for scenery.
£3
[SPORTS]
It will
be
a normal motion picture recording during the
motion picture recording.
e
[CLOSE-UP] Record motion pictures with settings suitable for close-ups.
~
[NIGHT
PORTRAln
Record clear motion pictures with low light setting
[H]
inside dim rooms or at dusk.
~
My Color mode Record motion pictures
in
My Color mode setting.
(ENG) VQT2G40 25
Basic
Start recording by pressing the motion
picture button.
® Available recording time
® Elapsed recording time
The audio is also recorded simultaneously from the
built-in microphone
on
this unit. (Motion pictures
cannot
be
recorded without audio.)
The recording state indicator (red)
© will flash while recording motion pictures.
Focus can
be
achieved during recording by pressing [FOCUS].
D Stop the recording by pressing the motion picture button again.
Sound will go off when pressing the motion picture button indicating start/stop
of
motion
picture recording.
Sound volume can
be
set
in
[BEEP LEVEL].
If the built-in memory or the card becomes full
in
the middle
of
recording, the camera
stops recording automatically.
L
.J
,.
,
©
®
L
.J
,.
,
[dl~
e
"!'}.
~
@lsi
®
_Note
The screen will change as following when the motion picture button is pressed
in
steps 3 and
4.
® Still picture recording
screen
® Motion picture mode
setti
ng
:f1
© Motion picture
recording screen
@ Still picture mode
setting*2
@
*1 The screen that
is
displayed during motion picture mode setting is different depending
on
the
setting of the [REC
MODE].
*2
[0]
will not
be
displayed
in
the Creative Motion Picture Mode.
26 VQT2G40 (ENG)
Basic
[PLAYBACK] Mode:
(§J
Playing back Pictures ([NORMAL PLAY])
II
Slide the [REC]/[PLAYBACK] selector
switch
® to [IB].
Normal playback
is
set automatically
in
the
following cases.
- When the mode was switched from the [REG]
to [PLAYBACK].
- When the camera was turned on while the
[REC]/[PLAYBACK] selector switch was at
[(B].
6 Press
.....
/~
to select the picture.
® File number
® Picture number
~:
Play
back
the previous picture
~:
Play
back
the
next
picture
Fast forwarding/Fast rewinding
Press and hold
~/~
during playback.
~:
Fast rewind
~:
Fast forward
The file number ® and the picture number ® only change one
by
one. Release
....
/~
when the
number ofthe desired picture appears to play back the picture.
If you keep pressing
....
/~,
the number of pictures forwarded/rewound increases.
(ENG) VQT2G40 27
Basic
[PLAYBACK]
Mode:
(§)
Deleting Pictures
Once deleted,
pictures
cannot
be
recovered.
Pictures on the built-in memory or the card, which is being played back will be deleted.
,
Ie
lelele
a singli
lilllllte
> ,
oSelect the
picture
to
be deleted, and then
,.,
press
[1llJ].
® [DISPLAY] button
®
[1llJ]
button
a Press
.....
to
select [YES] and then press
[MENU/SET].
DISPLAY
o
D Press [MENU/SET].
II
Press.
to
select [YES] and then press [MENU/SET]
to
set.
oPress
[1llJ].
EI
Press
./T
to
select [DELETE MULTI]
or
[DELETE
ALL]
and
then
press [MENU/SET].
[DELETE ALL]
~
step
5.
11
Press
./T
/
.....
/~
to
select
the picture, and
then press [DISPLAY]
to
set. (Repeat this
step.)
[~]
appears
on
the selected pictures. If [DISPLAY]
is
pressed again, the setting is canceled.
28 VQT2G40 (ENG)
lila
OP&f!litlg
,".Uu~tiofl.
Will
"-
,I'lUallflj
u
i:n(lintvd
b~l&W
1
1:,
r~:1:
Ot<t-:'l;::~
I~~'::xlx~,s
flle
{PDF
@lC",:K.,ll)
~iJe
';::t4C.1
:n.I~
tntl
F:~,}~Fllc~'.~~~~"IC-L""l){<·fO>::<-f
:,!
;~~~:.~(>
1:1<'
Q:;.M~
If\SLh:~I'CH""'-'::
::»:'NI\M
!Ii'1M
ws~t:lj;
.It'!':!",'
Ill?
,
':(1
"''l.~~1.lI~
rt>l!
D~,~tl";;:
Il>st',,::;t.;;{\~
~''!l
~;}:>'>'l.'
fk·m-;:
·s;x.r1::<It1
>
':.J::t<e
P.1I~OO'·5
'c'~!{\t;;
t·r;;WS(·
0'
t..-.nll"<, 0
..,ra~~
tnsl"O(l""'~
1>111:
'PVF<l,};;<.O,lt>lU
Others
Reading the Operating
Instructions
(PDF format)
You
have practised
the
basic operations introduced
in
these operating instructions
and
want to
progress
to
advanced operations.
You
want
to
check the Troubleshooting.
In these kinds
of
situations refer to Operating Instructions (PDF format) recorded on the
CD-ROM containing the Operating Instructions (supplied).
For Windows
DTurn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
6 Select the desired language and then
click [Operating Instructions] to
install.
(Example: When an English language OS)
mDouble click the "Operating
/n
Instructions" shortcut icon on the
desktop.
When the Operating Instructions (PDF format) will not open
You
will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to browse or
print the Operating Instructions (PDF format).
Download and install a version
of
Adobe Reader that you can use with your OS from the
following Web Site.
http://www.adobe.com/products/acrobatlreadstep2_allversions.html
If using Windows 2000 SP4/Windows XP SP2 or SP3IWindows Vista and
SP1
Insert the CD-ROM containing the Operating Instructions (supplied), click [Adobe(R)
Reader(R)] and then follow the messages on the screen to install.
To
uninstall the Operating Instructions (PDF format)
Delete the PDF file from the "Program Files\Panasonic\Lumix\" folder.
When
the
contents
in
the Program Files folder cannot
be
displayed, click the [Show the
contents of this folder] to display them.
For Macintosh
g Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
6 Open the "Manual" folder
in
the CD-ROM and
, .' then copy the PDF file with the desired language
inside the folder.
mDouble click the PDF file to open
it.
(ENG) VQT2G40 29
Others
Digital Camera:
Information for your safety
Power Source:
Power Consumption:
DC
8.4 V
1.3 W (When recording with LCD Monitor)
1.3 W (When recording with Viewfinder)
0.6 W (When playing back with LCD Monitor)
0.6 W (When playing back with Viewfinder)
12,100,000 pixels
1/2.33" CCO, total pixel number 12,700,000 pixels, Primary
color filter
Optical
18xzoom,
f=4.8
mm to 86.4
mm
(35 mm film camera
equivalent: 27 mm to 486 mm)
Wide:
F2.8
to
F8.0
(when
recording motion pictures:
F2.8
to
F8.0)
Tele:
F4.4
to
F8.0
(when
recording motion pictures:
F4.4
to
F13)
Max.4x
Max.
35.2x
Auto focus/AF Macro/Macro zoom/Manual focus
Face detection/AF Tracking/11-area-focusing/1-area-focusing
(High speed)/1-area-focusing/Spot-focusing
AF: 30
cm
(0.99
feet) (Wide)/2 m (6.57 feet)
(Tele)
to
00
AF Macro/MF/lntelligent auto:
1
cm
(0.04 feet) (Wide)/1 m (3.28 feet) (Tele) to
00
However, 2 m (6.57 feet) to
00
for
4x
to
10x
zoom
1 m (3.28 feet) to
00
for
11
x to
18x
zoom
Scene Mode: There may
be
differences
in
the above settings.
Electronic shutter+ Mechanical shutter
Lens:
Camera effective pixels:
Image sensor:
Digital zoom:
Extended optical zoom:
(Except for the maximum
picture size for each
aspect ratio)
Focus:
Focus range:
Shutter system:
Burst recording
Burst speed: Approx. 2.3 pictures/second
Number
of
recordable
pictures: Max. 5 pictures (Standard), max. 3 pictures (Fine)
30 VQT2G40 (ENG)
Others
Hi-speed
burst
Burst
speed: Approx.
10
pictures/second
(Speed
priority)
Approx. 6 pictures/second (Image priority)
(3M (4:3), 2.5M (3:2) or 2M (16:9)
is
selected as the picture
size.)
Number
of
recordable
pictures:
15
to
100
(differs depending
on
the type
of
Card and the recording
conditions)
ISO
sensitivity
(Standard
Output
Sensitivity)
Still picture:
Motion pictures:
Shutter
speed
Still picture:
Motion pictures:
White balance:
Exposure (AE):
Metering mode:
LCD
monitor:
Viewfinder:
Flash:
Microphone:
Speaker:
Recording media:
AUTO/80/100/200/400/800/1600
[HIGH SENS.] Mode: 1600 to 6400
AUTO/400/800/1600/3200/6400
Wide:
60 seconds to 1/2000th
of
a second
Tele:
60 seconds to 1/130Oth
of
a second
[STARRY SKY] Mode: 15 seconds, 30 seconds, 60 seconds
1/30 to 1/2000Oth of a second
Creative Motion Picture Mode
(Manual exposure/Manual focus): 1/8 to 1/20000th
of
a second
Auto white balance/Daylight/Cloudy/Shade/Flash/Incandescent
lights/White set1/White set2/White balance K set
Program AE (P)/Aperture-priority AE (A)/Shutter-priority AE (S)/
Manual exposure (M)
Exposure compensation (1/3 EV Step,
-2
EV to
+2
EV)
Multiple/Center weighted/Spot
2.7" TFT LCD
(Approx. 230,000 dots) (field
of
view ratio about 100%)
Color LCD Viewfinder (Approx. 201,000 dots)
(field
of
view ratio about 100%)
(with diopter adjustment
-4
to
+4
diopter)
Built-in pop up flash
Flash range: [ISO AUTO]
Approx. 30
cm
(0.99 feet) to 8.5 m (27.9 feet) (Wide)
AUTO, AUTO/Red-eye reduction, Forced flash
ON
(Forced ON/
Red-eye reduction), Slow sync./Red-eye reduction, Forced
flash OFF
Stereo
Monaural
Built-in Memory (Approx. 40 MB)/SD Memory Card/SDHC
Memory Card
(ENG) VQT2G40
31
Others
Picture size
Still picture:
Motion pictures:
Quality:
Recording file format
Still Picture:
Motion pictures with
audio:
32 VQT2G40 (ENG)
When the aspect ratio setting
is
[IIJ]
4000x3000
pixels, 3264x2448 pixels,
2560x1920
pixels,
2048x
1536 pixels, 1600x1200 pixels,
640x480
pixels
When the aspect ratio setting
is
[IBH]
4000x2672 pixels, 3264x2176 pixels,
2560x1712
pixels,
2048x 1360 pixels
When the aspect ratio setting
is
[1nD]
4000x2248
pixels,
3264x
1840 pixels,
2560x
1440 pixels,
1920x 1080 pixels
[AVCHD Lite] (With audio)
When set
to
[SH]:
1280x720
pixels
(60p recording*
117
Mbps, only when card
is
used) 1
When set to [HJ
1280x720
pixels
(60p recording
113
Mbps, only when card
is
used) 1
When set
to
[L]:
1280x720
pixels
(60p recording+
19
Mbps, only when card
is
used)
* CCD output
is
at
30
fps
[MOTION JPEG] (With audio)
When set to [HD]: 1280x720 pixels
(30 frames 1sec., only when card
is
used) 1
When set
to
[WVGA]:
848x480
pixels
(30 frames 1sec., only when card
is
used) 1
When set to [VGA]:
640x480
pixels
(30 frames 1sec., only when card
is
used) 1
When set
to
[OVGA]:
320x240
pixels (30 frames 1sec.)
Fine/Standard/RAW/RAW+JPEG
JPEG (based
on
"Design rule for Camera File system", based
on
"Exif 2.21" standard)/RAW, DPOF corresponding
AVCHD Lite/OuickTime Motion JPEG
Interface
Digital:
Analog video/audio:
Terminal
[DIGITALIAV OUT]:
[DC IN]:
[HDMI]:
Dimensions:
Mass (weight):
Others
"USB 2.0" (High Speed)
NTSC
Audio line output (stereo)
Dedicated jack (14 pin)
Type 3 jack
MiniHDMI TypeC
Approx. 117.6 mm (W)X75.8 mm
(H)x88.9
mm (D)
[45/8/1
(W)X3/1(H)X3
1/2/1
(D)] (excluding the projecting parts)
Approx. 367
g/12.94 oz (excluding card and battery)
Approx. 414 g/14.60 oz (with card and battery)
Operating temperature: 0
°C
to
40°C
(32 of
to
104
OF)
Operating humidity:
Language select:
Battery Charger
(Panasonic DE-A43B):
Input:
Output:
Equipment mobility:
Battery Pack
(lithium-ion)
(Panasonic
CGR-S006A):
Voltage/capacity
(Minimum):
10%
to
80%
[ENGLlSH]/[ESPANOL]
Information for your safety
110
V to 240 V,,--50/60 Hz, 0.15 A
CHARGE 8.4
V=0.43
A
Movable
Information for your safety
7.2 V
1695
mAh
(ENG) VQT2G40 33
Others
Accessory# Figure Description
CGR-S006A
DMW-AC7PP
® :DMW-LPL46
® :DMW-LMC46
©:
DMW-LND46
DMW-LT55
DMW-LC55
DMW-LA3
RP-COHM15
RP-COHM30
RP-SOW32GU1 K
RP-SDW16GU1K
RP-SOW08GU1K
RP-SOW04GU1 K
RP-SOW02GU1 K
RP-SOP16GU1K
RP-SDP12GU1K
RP-SOP08GU1K
RP-SDP04GU1K
RP-SOP02GU1 K
RP-SOR08GU1A
RP-SOR04GU1A
RP-SOR02GU1A
Lithum Ion Battery
AC
Adaptor*l
®:
PL Filter
® :
MC
Protector
©:
NO
Filter
Tele
Conversion Lens*2
Close-up Lens*
2
Lens Adaptor
HDMI mini Cable
Class
10
32
GB
SDHC Memory Card
Class 10
16
GB SDHC Memory Card
Class
108GB
SDHC Memory Card
Class
104GB
SOHC Memory Card
Class
62GB
SO
Memory Card
Class 4
16
GB
SDHC Memory Card
Class 4
12
GB
SDHC Memory Card
Class
48GB
SDHC Memory Card
Class
44GB
SDHC Memory Card
Class
42GB
SD
Memory Card
Class
28GB
SOHC Memory Card
Class
24GB
SDHC Memory Card
Class
22GB
SO
Memory Card
*1 The battery cannot be charged with the
AC
adaptor. Use the supplied charger.
*2
The
lens adaptor (DMW-LA3; optional) is necessary to attach a tele conversion lens or
close-up lens.
NOTE: Accessories
and/or
model
numbers
may
vary between countries.
Consult
your
local
dealer.
34 VQT2G40 (ENG)
Others
)
Please photocopy this form when placing an order.
1.
Digital Camera Model #
2.
Items Ordered
Accessory
#
Description
Price Each Quantity Total Price
Subtotal
Your State
&Local Sales
Tax
Shipping &Handling
6.95
Total Enclosed
3.
Method
of
payment (check one)
o Check
of
Money Order enclosed (NO C.O.D.SHIPMENTS)
o VISA Credit Card #
o MasterCard Expiration Date _
o Discover Customer Signature _
Phone#:
Day
Last
Make Check or Money Order to: PANASONIC ACCESSORIES
(Please do not send cash)
4.
Shipping information (UPS delivery requires complete street address)
Ship
To:
Mr.
Mrs.
Ms.
_
First
Street Address
Night
TO OBTAIN ANY OF OUR DIGITAL CAMERAACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC'S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM
M-F,
PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY
ACCESSORY ORDER OFFICE
20421 84th Avenue South Kent, WA. 98032
City
State
Zip
(ENG) VQT2G40
35
Others
)
Please make a copy of this page and note the problem you are having. Include it with
your proof
of
purchase, and ship your camera to the address below.
Reason
for
requesting
service:
(USA and Puerto Rico Only)
Mail this completed form and your Proof
of
Purchase along with your unit
to:
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
McAllen,
TX
78503
36 VQT2G40 (ENG)
Others
.............
]
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC
CORPORATION OF NORTH AMERICA
One Panasonic
Way,
Secaucus, New Jersey 07094
Panasonic Digital Still Camera
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company (referred to as "the warrantor") will, for the
length
of
the period indicated
on
the chart below, which starts with the date
of
original
purchase ("warranty period"), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair
or
replace will be made by the warrantor.
PRODUCT OR PART NAME
PARTS
LABOR
DIGITAL STILL CAMERA
1
(ONE)
YEAR
1
(ONE)
YEAR
(EXCEPT ITEMS LISTED
BELOW)
CCD 6 (SIX) MONTHS
90 (NINETY)
DAYS
RECHARGEABLE
BATTERY
90 (NINETY) DAYS
NOT APPLICABLE
PACK
(IN EXCHANGE FOR
DEFECTIVE BATTERY PACK)
SD MEMORY CARD
90 (NINETY)
DAYS
NOT APPLICABLE
(IN EXCHANGE FOR
DEFECTIVE
SO
CARD)
During the "Labor" warranty period there will be no charge for labor. During the "Parts"
warranty period, there will be no charge for parts.
You
must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies
to
products purchased and serviced in the United
States or Puerto Rico. This warranty
is
extended only to the original purchaser
of
a new
product which was not sold "as is". A purchase receipt or other proof
of
the original
purchase date
is
required for warranty service.
(ENG) VQT2G40 37
Others
Carry-In or Mail-In Service
For Carry-In or Mail-In Service
in
the United States and Puerto Rico call
1-800-211-PANA (7262).
This warranty ONLY COVERS failures due to defects
in
materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred
in
shipment, or failures which are caused
by products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line
surge, lightning damage, modification, or commercial use (such
as
in
a hotel, office,
restaurant, or other business), rental use of the product, service by anyone other than a
Factory Service center or other Authorized Servicer, or damage that
is
attributable to acts
of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED
WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, travel to and from the servicer, loss
of
media or images, data or
other memory content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation
of
incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Service center. If the problem
is
not handled to
your satisfaction, then write to the warrantor's Consumer Affairs Department at the
addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
38 VQT2G40 (ENG)
Others
Obtain
Product
Information
and Operating
Assistance;
locate
your
nearest
Dealer
or
Service Center;
purchase
Parts and
Accessories;
or
make
Customer
Service and Literature requests
by
visiting
our
Web Site at:
htt
://www.anasonic.com/hel
or,
contact
us
via
the
web at:
htt
://www.anasonic.com/contactinfo
You
may
also
contact
us
directly
at:
1-800-211-PANA (7262),
Monday-Friday
9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST
For
hearing
or
speech
impaired TTY users, TTY :1-877-833-8855
Accessory
Purchases (United States
and
Puerto Rico)
Purchase
Parts,
Accessories
and
Instruction
Books
online
for
all Panasonic
Products
by
visiting
our
Web Site at:
http://www.pstc.panasonic.com
or,
send
your
request
by
E-mail to:
npcparts@us.panasonic.com
You
may
also
contact
us
directly
at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday
-
Friday
9 am
to
9 pm, EST.)
PANASONIC SERVICE AND TECHNOLOGY COMPANY
20421 84th
Avenue
South, Kent,
WA
98032
(We
Accept
Visa, MasterCard,
Discover
Card,
American
Express,
and Personal Checks)
For
hearing
or
speech
impaired
TTY users, TTY :1-866-605-1277
Product
Repairs
United
States
and
Puerto
Rico
Panasonic Services
Company
Customer
Servicenter
Suite B
MAIL TO : 4900 George McVay Drive
McAllen, TX 78503
Important: When returning your product, please pack it securely with all the
original accessories including the program CD. For processing
purposes, please include your name, a United States mailing address
(a Post Office Box will not be accepted), telephone number, and a
complete description
of
the problem you are experiencing.
To
receive a replacement product under the terms
of
the warranty,
you must include a copy
of
your proof
of
purchase.
As
of
July 2009
)
(ENG) VQT2G40 39
HIGH-DEFINITION
MULTIMEDIA
INTERFACE
QuickTime
IIIDOLBY
DIGITAL I
STEREO
CREATOR
l\VCHDLite TM
SDHC Logo is a trademark.
The "AVCHD", "AVCHD Lite" and the "AVCHD",
"AVCHD Lite" logo are trademarks
of
Panasonic
Corporation and Sony Corporation.
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are trademarks
of
Dolby Laboratories.
HDMI, the HDMI Logo and the High-Definition
Multimedia Interface are the registered
trademarks
or
trademarks
of
HDMI Licensing
LLC.
VIERA
Link™
is a trademark of Panasonic
Corporation.
EZ Sync is a trademark
of
Panasonic
Corporation.
HDAVI
Control™
is a trademark
of
Panasonic
Corporation.
QuickTime and the QuickTime logo are
trademarks or registered trademarks
of
Apple
Inc., used under license therefrom.
Microsoft product screen shot(s) reprinted with
permission from Microsoft Corporation.
Other names, company names, and product
names printed
in
these instructions are
trademarks
or
registered trademarks
of
the
companies concerned.
This product is licensed under the AVC patent portfolio license for the personal and
non-commercial use
of
a consumer to (i) encode video
in
compliance with the AVC Standard
("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged
in
a
personal and non-commercial activity and/or was obtained from a video provider licensed to
provide AVC Video. No license is granted or shall
be
implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Panasonic Consumer Electronics Company,
Division
of
Panasonic
Corporation
of
North
America
One
Panasonic
Way,
Secaucus,
NJ
07094
©
Panasonic
Corporation
2009
Printed
in
Japan
Panasonic
Supplied software
Software
for
Acquiring, Editing and Managing Pictures
(~
3)
(C::>
3)
(C::>
3)
ArcSoft
Panorama Maker
(C::>
3)
ArcSoft
Medialmpression
(C::>
3)
QuickTime
(C::>
4)
Other Software
(~4)
eln these operating instructions, the supplied software included in the
CD-ROM
is described.
If you have questions about any
of
the supplied software, contact the appropriate
support center.
VQT2E99
Introduction
Microsoft and Windows are either registered trademarks or trademarks
of
Microsoft Corporation, USA
in
the United States and other countries.
IBM and PC/AT are registered trademarks of International Business Machines
Corporation
of
the U.S.
Apple, the Apple logo and Macintosh, Mac
as are the registered trademarks of
Apple Inc., USA.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated
in
the United States and other
countries.
Intel, Pentium, and Celeron are registered trademarks or trademarks of Intel
Corporation
in
the United States and other countries.
Microsoft product screen shot(s) reprinted with permission from Microsoft
Corporation.
Furthermore, all names, organization names, products etc. mentioned herein
are the registered trademarks or trademarks
of
the respective organizations.
This product
is
licensed under the AVC patent portfolio license for the personal
and non-commercial use
of
a consumer to (i) encode video
in
compliance with
the AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was
encoded by a consumer engaged
in
a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide AVC Video. No
license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Please note that some
of
the explanations and screens covered
in
these
operating instructions may differ from actual ones depending on the operating
environment
of
the PC.
No information
is
provided about basic PC operations and terms. Please refer
to the relevant PC manual.
The explanations
in
these operating instructions are subject to change without
prior notification.
No part
of
these operating instructions may
be
reproduced without permission.
Even when the operating environment
is
satisfied, the product cannot
be
used
on some PCs.
When 2 or more USB devices are connected to 1
PC,
or when the product
is
connected to the PC through a USB hub or a USB extension cable, operation
is
not guaranteed.
When connected to the USB terminal
of
the
PC
keyboard, the product might
not operate properly.
2
VQT2E99
Software for Acquiring, Editing and Managing
Pictures
PHOTOfunSTUDIO
(Windows
XPNista)
This software allows you to acquire pictures to the PC, and also categorize these acquired
pictures by their recording date or the model name
of
the camera used.
You
can resize
pictures and add effects to the pictures. Various printing functions, such as layout printing,
and writing function to
CD-R*
are supported too.
If
you forgot to set the date
on
the digital
camera, you can add the date of recording to pictures with this software.
Also, [AVCHD Lite] motion pictures can be loaded and written to DVD.
*This can be used only if the [Writing] tab
is
displayed
on
the [Properties] of the CD/DVD
drive on the PC.
SILKYPIX Developer Studio
(Windows Me/2000lXPNista [Windows 2000/XPNista recommended],
Mac
OS
X v10.2 [v10.3
or
later recommended])
This is software to edit RAW format images.
Using RAW files recorded
on
this camera allows images to be edited with a higher quality.
Edited images can be saved
in
a format (JPEG, TIFF, etc.) that can be displayed on a
personal computer.
For details on
how
to
use the SILKVPIX Developer Studio, refer
to
the
"Help"
or
the Ichikawa Soft Laboratory's
support
website:
http://www.isl.co.jp/SILKVPIXlenglish/p/supportl
ArcSoft Panorama Maker
(Windows XPNista, Mac
OS
X [10.3.9
to
10.5])
It
is
possible to combine several still pictures to make panoramic photos.
ArcSoft Medialmpression
(Windows XPNista, Mac
OS
X [10.3.9
to
10.5])
Still pictures can be edited, modified, printed, or written to a CD-R.
2
3
VQT2E99
Other Software
QuickTime
(Windows XPNista)
You
can play back still pictures with audio and motion pictures (QuickTime Motion JPEG
format: .MOV extension) recorded
on
a digital camera.
This is included as standard
in
Macintosh OSs.
If you use Windows 98/98SE/Me/2000, download "QuickTime 6.5.2 for Windows" from
the following site and then install it.
http://www.apple.com/supportldownloads/quicktime652forwindows.htmI
Please purchase Apple QuickTime Pro to edit movies created with the camera.
Cautions for Use
Please do not disconnect the USB connection cable when Software (supplied)
is
in
use.
The software may not function correctly and damage the data being transmitted.
When the access indication
of
the digital camera
is
lit or flashing, please do not
disconnect the USB connection cable. The software may not function correctly and
damage the data being transmitted. Please refer to the digital camera operating
instructions.
When connecting
to
a PC, it
is
recommended that you power the digital camera using a
battery with sufficient charge left on
it.
If the battery runs out during data transmission,
the data being transmitted may be damaged.
Installing supplied software
Before inserting the CD-ROM, close all running applications.
(For Windows)
1 Insert the CD-ROM with the supplied
software.
The setup menu will start.
Ifthe setup menu does not automatically start, double-
click [My Computer] on the desktop, double-click or open
[VFFXXXX] (part
No.
XXXX varies by model), and double-
click [lnstMenu.exe].
2 Click
on
the [Recommended Installation].
All necessary software will be installed.
Only the software compatible with the PC
in
use will be
displayed.
Proceed with installation according to messages
appearing
on
the screen.
If
you
do not need
to
install
all
software, click
on
the required
software
in
the
Custom Install
and
install one
by
one.
4
VQT2E99
(For Macintosh)
1 Insert the CD-ROM with the supplied software.
The folder is automatically displayed.
2 Double-click on the ArcSoft
or
SILKYPIX
folder to open it.
3 Double-click the icon
in
the application folder.
Installation starts.
About
the
operating
instructions
for
PHOTOfunSTUDIO
(PDF
format)
Follow the steps below after installation to read
the
file containing the operating instructions
for PHOTOfunSTUDIO (PDF format).
[start]
»
[All
Programs
(Programs)]
»
[Panasonic]
»
[PHOTOfunSTUDIO
4.0
HD
Edition]
»
[Manual]
You
need Adobe Acrobat Reader 5.0 or later
or
Adobe Reader 7.0 or later to read the file
containing the operating instructions (PDF format).
If the computer you use does not have Adobe Reader installed as standard, please
download and install it from the website below.
http://www.adobe.com/products/acrobatlreadstep2_allversions.html
After the software starts
Select [Manual] to display the operating instructions (PDF format).
How
to
Remove
PHOTOfunSTUDIO
(Uninstall)
Click [start] » ([Setup]
»)
[Control Panel].
2 Double-click [Add
or
Remove Programs].
3 Select a software program to be removed,
and click [Change/Remove].
Usually, it is unnecessary to uninstall these types
of
programs. When these programs
go
out
of
order, uninstall and install them again.
1
:SJE'.l~1
WP"iot.
To
remove other software programs, repeat these 3 steps.
When removing PHOTOfunSTUDIO, select [PHOTOfunSTUDIO 4.0 HD Edition].
The procedure for uninstalling may vary depending on the PC. For details, refer to the
operating instructions for the PC you are using.
5
VQT2E99
Operating environment
PHOTOfunSTUDIO 4.0
HDEdition
Windows® XP Windows Vista®
PC
IBM® PC/AT compatible personal
IBM® PC/AT compatible personal
computer having Intel® Pentium® computer having Intel® Pentium®
III
500 MHz
or
higher CPU
111800
MHz
or
higher CPU
(including compatible CPU)
(including compatible CPU)
Recommended environment
for
AVCHD Lite
motion
picture function
Intel®
Core™
2 Duo 2.16 GHzlPentium® D 3.2 GHz or higher (when
playing back the motion picture)
Intel®
Core™
2 Quad 2.6 GHz
or
higher (when editing motion pictures)
The
minimum
environment
for
AVCHD
Lite
motion
picture
function
(environment
which
can
be
played
back
for
2
frames/seconds)
Intel® Pentium®
III
1 GHz or higher
OS
Preinstalled
Microsoft® Windows® XP Professional SP2/SP3
Microsoft® Windows® XP Home Edition SP2/SP3
Microsoft® Windows Vista® Ultimate
or
SP1/SP2
Microsoft® Windows Vista® Business or SP1/SP2
Microsoft® Windows Vista® Home Premium or SP1/SP2
Microsoft® Windows Vista® Home Basic or SP1/SP2
Display
High Color (16 bit) or more (32 bit or more recommended)
Desktop resolution
of
1024x768 pixels or more
(1280X 1024 pixels
or
more recommended)
Graphics card complying with Graphics card complying with
DirectX® 9.0c DirectX® 10
DirectDraW® overlay support
PCI Express
x 16 is recommended
RAM
256 MB or more 512 MB or more
(1
GB
or
more for AVCHD Lite motion picture function)
Free
hard
disk
space
Ultra DMA-100 or higher
450 MB or more for installing software
When
writing
to
DVD,
twice
the
amount
of
free
space
as
the
disc
is
necessary.
If the compression setting is enabled, errors will occur during
recording. Clear the check for [Compress this drive to save disk
space]
in
[Properties] for the hard disk drive.
Necessary
software
DirectX® 9.0c
DirectX® 10
If
you install the software
in
a
PC that is not compatible with
DirectX® 9.0c, the PC may stop
operating properly. If you are
unsure if your PC is compatible,
contact the maker.
.NET framework 2.0
Internet Explorer 6.0 or more
Drive
CD-ROM drive (required to install this program)
A compatible drive and media are required for DVD writing.
Sound
Windows compatible sound device
Interface
USB port (Hi-Speed USB (USB2.0))
Other
requirements
Mouse or equivalent pointing device
6
VQT2E99
Even if the system requirements mentioned
in
these operating instructions are fulfilled, some personal
computers cannot be used.
The
operation of this
software
will
not
be
guaranteed
when
fonts other
than
English
fonts
are
selected
and
used.
This software may not run properly on user-built computers.
PHOTOfunSTUDIO is available for Windows only. It cannot be used on Macintosh.
This software cannot be used on Microsoft Windows® 3.1, Windows® 95, Windows® 98,
Windows® 98SE, Windows® Me, Windows
NT®
and Windows® 2000.
Operation is not guaranteed on Microsoft® Windows Vista® Enterprise, Windows® XP Media Center
Edition, Tablet
PC
Edition and not compatible with 64 bit operation systems.
Operation on an upgraded OS
is
not guaranteed.
Operation on an OS other than the one pre-installed is not guaranteed.
Multi-boot environment is not supported.
This software does not support the multi-monitor environments.
Only the system administrator can install or uninstall this software.
Log on with an administrator account
or
standard user account before using this software.
You
cannot
use this software with a guest account.
If the settings for the size of characters in the screen settings dialog box
in
Windows
is
larger than the
standard size, some buttons may be displayed off-screen and cannot be operated.
In
this case, restore
the font size to standard size.
When 2 or more USB devices are connected to a PC,
or
when devices are connected through USB
hubs or by using extension cables, proper operation is not guaranteed.
Operation on Windows Vista® Ultimate with the user interface set to other languages using the Multi-
language User Interface (MUI) function is not guaranteed.
Only AVCHD/AVCHD Lite motion pictures that were created with the following can be handled.
- This software.
- Digital camera with this software supplied with it
7
VQT2E99
SILKYPIX Developer Studio 3.0 SE
Windows Macintosh
PC
Intel® Pentium® compatible PowerPC® G4 or its dual-
processors (Pentium 4 or higher processor (G5
or
later
recommended)
recommended)
Multi-core processor ready (Intel Supported Intel Core Duo and
Core Duo, Pentium
0,
AMD
Universal Binary
Athlon 64 X2, etc.)
OS
Windows® Me, Windows® 2000,
Mac
as x v10.2 (v10.3 or later
Windows®
XP.
Windows Vista® recommended)
(The Windows® 2000/XP/
Windows Vista® recommended)
Display
XGA (1024X768) and Full-Color Display that supports a resolution
(24 bits) or more
of
1024x 768
or
more
Display and video card capable of
displaying 16 bit color or more.
(24 bit color or more
recommended)
RAM 512 MB
(1
GB or more 512 MB
(1
GB or more
recommended)
recommended)
(1
GB or more if using Windows
Vista®)
Free
hard
disk
space 100 MB or more free space (required for installation and activation)
A large amount
of
free disk space
is
required depending on the
development data or storage
of
images after development.
(1
photograph will use around
10MB)
Drive
CD-ROM drive (reqUired to install this program)
Other
requirements
Keyboard, mouse, or equivalent input device
System administrator (Administrator) privileges are necessary when installing this software
on
Windows® 2000, Windows® XP or Windows Vista®.
This software cannot be used on 64-bit
as.
The personal computer must be connected to the Internet for user registration.
8
VQT2E99
ArcSoffPanoramaMaker, ArcSoft Medialmpression
PC
[For
Windows]
Intel® Pentium® 4 1.6 GHz or higher
[For
Macintosh]
PowerPC G4 or higher (Intel Mac compatible)
OS
[For
Windows]
Windows® XP SP2, Windows Vista®, Windows Vista® SP1/SP2
[For
Macintosh]
Mac as x(10.3.9 to 10.5)
Display
High Color (16 bit) or more
Desktop resolution
of
1024x 768 pixels or more
RAM
512
MB
or more
Free
hard
disk
space
[For
Windows]
150
MB
or more free space
[For
Macintosh]
250
MB
or more free space
Drive
CD-ROM drive (required to install this program)
Other
requirements
Mouse or equivalent pointing device
USB-connectable environment
Compatible
OS:
Windows® Millennium Edition, Windows® 2000 Professional,
Windows® XP Home Edition, Windows® XP Professional,
Windows Vista® Home Basic, Windows Vista® Home Premium,
Windows Vista® Business, Windows Vista® Ultimate
and Mac
as 9.2.2, Mac as x
(10.1
to 10.5)
If the [Untitled] disk icon does not mount when using Mac
as
9,
restart the Mac after setting the
Extension Manager to Mac as Basic Set.
If the message requesting to format [Untitled] disk is displayed when using Mac as
9,
open the File
Exchange
in
the Control Panel, and enable the
PC
Exchange.
9
VQT2E99
l\VCHD
Lite TM
[IJDOLBY
DIGITAL I
STEREO
CREATOR
Quicklime
The "AVCHD", "AVCHD
Lite"
and the "AVCHD",
"AVCHD Lite" logo are trademarks
of
Panasonic Corporation and Sony Corporation.
Manufactured
under
license
from
Dolby
Laboratories.
Dolby and the double-D
symbol
are trademarks
of
Dolby
Laboratories.
QuickTime and the QuickTime
logo
are
trademarks
or
registered trademarks
of
Apple
Inc., used
under
license therefrom.
Panasonic Consumer Electronics Company,
Division
of
Panasonic Corporation
of
North
America
One Panasonic
Way,
Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
© Panasonic Corporation 2009
Printed
in
Japan
ENGLISH
To play back AVCHD Lite motion pictures
recorded with this unit
on
Panasonic Blu-ray
Disc Players (DMP-BD30IDMP-BD31/DMP-BD50)
It
is
necessary to update the firmware
of
the Blu-ray Disc
Player.
You
can download the latest firmware version from the
following website.
http://panasonic.net/supportl
FRANCAIS (CANADA)
Pour visualiser, sur les lecteurs Blu-ray Disc
Panasonic (DMP-BD30/DMP-BD31IDMP-BD50),
des images animees AVCHD Lite enregistrees
sur cet appareil.
II
est necessaire d'effectuer
la
mise ajour du micrologiciel
du lecteur Blu-ray Disc.
La
plus recente version du micrologiciel peut etre
telechargee
apartir du site Web suivant.
http://panasonic.net/supportl
DEUTSCH
Wenn auf diesem Gerat aufgenommene
Bewegtbilder im Format AVCHD Lite auf einem
Blu-ray-Player von Panasonic (DMP-BD301
DMP-BD31/DMP-BD50) wiedergegeben werden
sollen
Die Firmware des Blu-ray-Players muss mit der neuesten
Version aktualisiert werden.
Die neueste Firmware-Version konnen Sie von folgender
Website herunterladen:
http://panasonic.net/supportl
FRANCAIS
Pour visionner
un
film
en
AVCHD Lite enregistre
avec cet appareil sur
un
lecteur
de
disque Blu-ray
Panasonic (DMP-BD30/DMP-BD31/DMP-BD50)
II
est necessaire de mettre ajour
Ie
firmware du lecteur de
disque Blu-ray.
Vous pouvez telecharger
la
derniere version du firmware
sur
Ie
site web suivant:
http://panasonic.net/support/
ITALIANO
Per riprodurre sui lettori
di
dischi Blu-ray
Panasonic (DMP-BD30/DMP-BD31/DMP-BD50)
delle immagini
in
movimento AVCHD Lite
registrate con questa unita
Enecessario aggiornare
il
firmware
dellettore
di dischi
Blu-ray.
Epossibile scaricare
la
versione del firmware pill recente
dal seguente site Web.
http://panasonic.net/supportl
NEDERLANDS
Om AVCHD Lite-bewegende beelden die met
dit apparaat opgenomen zijn op Panasonic
Blu-ray Disc Players (DMP-BD30IDMP-BD311
DMP-BD50) af
te
spelen
Is
het nodig de bedrijfswaren
van
de Blu-ray Discspeler te
vernieuwen.
U kunt de meest recente firmwareversie downloaden
vanaf de onderstaande website.
http://panasonic.net/supportl
ESPANOL
Para reproducir, en reproductores de discos
Blu-ray de Panasonic (DMP-BD30/DMP-BD311
DMP-BD50), las imagenes
en
movimiento
AVCHD Lite grabadas con esta unidad
Es
necesario actualizar
el
firmware del reproductor de
discos Blu-ray.
Puede descargar
la
ultima version del firmware desde
el
siguiente sitio web.
http://panasonic.net/supportl
PORTUGUES
Para reproduzir filmes AVCHD Lite gravados
com
esta unidade
em
Leitores
de
Discos Blu-ray
da
Panasonic (DMP-BD30/DMP-BD31/DMP-BD50)
Enecessario actualizar 0 software do Leitor de Discos
Blu-ray.
Pode descarregar a versao mais actualizada do software
a partir do seguinte website:
http://panasonic.net/supportl
SVENSKA
Hur
du
spelar upp videobilder som spelats
in
med AVCHD Lite frim den har enheten pa en
Panasonic Blu-ray-spelare (DMP-BD301
OM
P-BD311DMP-BD50)
Fastvaran for Blu-ray-spelare maste uppdateras.
Du
kan ladda ner senaste version av fastvaran fran
foljande webbsida.
http://panasonic.net/support/
DANSK
Afspilning
af
AVCHD Lite-film, som
er
optaget
med denne enhed pa Panasonic Blu-ray Disc
Player-afspillere (DMP-BD30/DMP-BD311
DMP-BD50)
Man skal opdatere firmwaren til Blu-ray Disc Player-
afspilleren.
Du
kan downloade den seneste firmware-version fra
f01gende websted.
http://panasonic.net/supportl
SUOMI
Talla laitteella tallennettujen AVCHD Lite
elokuvien toistaminen Panasonicin Blu-ray
soittimella (DMP-BD30/DMP-BD31IDMP-BD50)
Blu-ray soittimen laiteohjelmisto tulee paivittaa.
Voit ladata laiteohjelmiston viimeisimman version
seuraavalta verkkosivustolta.
http://panasonic.net/supportl
VQC7082
UL
note
(DE-A43B)
IMPORTANT
SAFETY
INSTRUCTIONS
SAVE
THESE
INSTRUCTIONS
DANGER-TO
REDUCE
THE
RISK
OF
FIRE
OR
ELECTRIC
SHOCK.
CAREFULLY
FOLLOW
THESE
INSTRUCTIONS.
Use
battery pack Panasonic
CGR-S006A
(7.2V,69SmAh
(min,),S.OWh)
for
use
of Panasonic Digital Camera only. For connection to a supply
not
in
the U.S.A., use an attachment plug adapter
of
the proper
configuration for the power outlet. This unit is intended
to
be
correctly orientated
in
a vertical or floor mount position.
CAUTION: Danger of explosion
if
battery is incorrectly replaced.
Replace only with the same
or
equivalent type recommended
by the manufacturer. Dispose the used batteries according to
the manufacturer's instruction.
A4301B
Panasonic
ideas
for
life
Important!
Please
complete
and
return
within
ten
days.
You
can
also
register
online
via
the
Internet
at:
http://www.panasonic.com/register
It
is
not
necessary
to
return
this
card
in
order
to
effectuate
the
limited
warranty.
1.
1.0
Mr.
Firsl
Name
2.0
Mrs.
3.0
Ms.
Initial
4.0
Miss
Last
Name
EWN01
Digital Camera
Slreel
Apt.
No.
City
Sfate
ZIP
Code
2.
E-mail
Address:
4.
Marilal
status:
1.
:J
Married
3.
Your
dale
01
birth:
5.
Telephone
number:
( )
/
Month
Year
2.
II
Single
17.
How
do
you
expect
to
use
your
new
digital
camera?
1.
0
Electronic
Mail
AUachments
7.
0
Web
PUblishing
2.
0
Greeting
Cards/Calendars
8.
Cl
Printing
Pictures
3.
0 Brochureslflyers for
Photo
Album
4.
0
Newsletters
9.
0
Other
5.
0
10
Photos
6.
0
Business
Reports/Presentations
8.
Was
Ihis
producl
purchased
on·line?
1.
[J
Yes
2.
[j
No
7.
A.
Model
.:
(refer
to
operating
manual
or
box)
9.
Name
ot
store
or
website
where
purchased:
B.
Serial
,:
(refer to the product)
IA)
(B)
(e) Inttndta
lIyau
lIit's
buy
in
next
~
~
6.lI!M1!Js
Plasma
TV
.................... ..
......
0
1.
:::J
1.
0
large
Screen
lCD
TV
................
0
2.
::J
2.
C
High
Definition
Camcorder.
..
0
3.
D 3.
0
Digital
Camcorder
......................
D
4.
0 4.
0
OVD
Camcorder
.........
..........
D
5.
0
5.
0
Digital
Camera.
....
0
6.
0
6.
0
DVD
Recorder
(exclUding
PC
DVD)
..................
0
7.
0
7.
0
Blu-ray
Disc
Player
........... ......
0 B 0 B. 0
Home
Theater
System.
lj
9 0 9 0
OECT
Cordless
Phone
................
1-]
10.
[J
10.
0
18. Whallype
01
prinler
do
you
plan
on
using
wilh
your
digilal
camera?
1.
0 I
don',
plan
on
using
a
printer
4.
0 laser
2.
0
Photo
Printer
5.
0
Other
3.
D Inkjet
19.
Excluding
this
purchase,
what
other
eleclronics
equipment
do
you
currently
own
or
intend
10
purchase?
Year
/
Day
/
Month
6.
Dale
ot
purchase:
10.
Price
paid
(excluding
service
$
conlract,
shipping
and
laxes):
.00
20.
Not
Including
yoursell,
what
is
the
GENDER
and
AGE
(in
years)
ot
children
and
olher
adulls
living
in
your
household?
1.
[]
No
one
else
in
household
2.
0
Child
under
1
year
Male
Female
Age
Male
Female
Age
12.
What
were
the
mosl
importanllaclors
that
inlluenced
your
selection
ot
Ihis
product?
(check
up
to
2
responses)
DB.
0
Zoom
09.
0
USB
Port
10.
D
Motion
Image
Recording
11.
0
flash
12.
0
Included
Software
13.
0
Other
23. level
of
educalion:
(check
highesl
levei
compleled)
1.
0
Completed
High
School
3.
0
Completed
Graduate
School
2.
[]
Completed
College
22.
Which
group
describes
your
annual
family
income?
01.
0
Under
$15,000
DB.
0 $75,000-$99,999
02.
0 $15,000-$19,999
09.
0 $100,000'$124,999
03.
0 $20.000-$29,999
10.
0 $125,000-$149,999
04.
0 $30,000·$39,999
11.
0 $150,000·$174,999
05.
0 $40,000-$49,999
12.
0 $175,000-$199,999
06.
0 $50,000-$59,999 13. 0 $200,000-$249,999
07.
0 $60,000,$74,999 14. 0 $250,000 &
over
2.
0
Rent?
24.
For
your
primary
residence,
do
you:
1.
0
Own'
1.
0
2.
0
yrs.
1.
0
2.
0
yrs.
1.
:J
2.
C
yrs.
,.
0
2.
C
yrs.
21.
Occupalion/Employmenl
Status:
(check
all
that
apply)
You
Spouse
ProfessionallTechnical
....
0
01.
I]
Upper
ManagemenVExecutive
.... 0
02.
CI
Middle
Management
..
:J
03.
:J
Sales/Marketing
...
D
04.
D
Clerical/Service
Worker
..
[]
05
D
Tradesman/Machine
Operator/laborer.
[]
06.
0
Teacher/Educator
...
0
07.
0
Healthcare
Physician/Nurse/Other
..
:J
OB.
0
Homemaker
...
0 09 0
Military
..
0
10.
0
Retired
...
0
11.
0
Self
EmployedlBusiness
Owner
...
0
12.
0
Work
from
Home
Office
.....
C 13. 0
01.
e]
Trust
in
Panasonic
10.
o
Online
research
02.
~
Ouality
11.
o
Warranty
03.
features
12.
o
In·store
Display
04.
-,
Price
13
[]
Store
Circularlflyer
05.
,~
Size
14.
U
Advertisement
06.
J
Appearance/Design
15.
o
Newspaper/Magazine
07.
Ease
of
operation
Article/Review
OB.
::J
Salesperson's
recommendation
16.
fJ
Received
as
agift
09.
,-
Friend/Family
recommendation
17.
n
Other
11.
Did
you
purchase
or
receive
an
extended
service
contract
with
your
product'
1.
'--
Yes
2.
c:
No
14.
What
olher
brand(s)
did
you
seriously
consider
before
selecting
Panasonic?
01.
.J
Did
not
consider
07.
0
Nikon
any
other
brands
08.
0
Olympus
02.
=:
Canon
09.
r'
Ricoh
03.
Casio
10.
::J
Sharp
04.
_'
Epson
11.
"J
Sony
as.
-.
Fuji
Photo
12.
~
Toshiba
06.
KOdak
13.
C
Other
13.
What
features
mosl
inlluenced
your
selection
of
Ihis
model?
(check
up
to
2
responses)
01.
t'-:
leica
DC
lens
02.
.J
Image
Ouality
03.
0
LCD
Screen
Size
04.
cJ
Optical
Viewfinder
05.
[]
Resolution
of
Camera
06.
0
MEGA
BURST'
Recording
07.
L..J
SO
ISecure
Digital)
Storage
Media
15.
Whal
is
your
compuler
planorm?
1.
C
Windows
8
95
5.
0
Windows
lt
2000
2.
C
Windows'"
Me
6
:J
Windows·
NT
3.
D
Windows\!
xp
7.
0
Mace
4.
D
Windows~
98
B.
0
Other
25.
Whal
type
of
internel
access
do
you
use
at
home?
1.
0
None
4.
0
DSL
2.
0
Dial
up
5.
0
Satellite
3.
0
Broadband
Cable
16.
Whal
will
this
producl
primarily
be
used
for?
1.
0
Business
3.
0
Education
2.
0
Home
4.
[J
Other
26.
When
new
products
Ihat
have
the
lalesl
technologies
appear
on
Ihe
market,
do
you
or
someone
In
your
household:
1.
0
Tend
to
buy
such
items
as
soon
as
they
are
available?
2.
0
Tend
to
wait
until
the
item
has
been
around
for
a
while
before
buying?
Please
continue
on
back
...
27.
To
help
us
understand
our
customers'
lifestyles,
please
indicate
the
interests
and
activities
in
which
you
or
your
spouse
enjoy
participating
on
a
regular
basis.
Home
Life
01.
[J
Grandchildren
02.
[J
Home
Improvement/Do-It-Yourself
03.
[J
Gardening
04.
II
Own
a
Dog
05.
0
Own
a
Cat
Leisure
06.
[J
Cultural/Art
Events
07.
[J
Avid
Book
Reading
08.:::J
Bible/Devotional
Reading
09.
[]
Gourmet
Cooking/Fine
Foods
10.
C
Wines
11.
[J
Art/Antique
Collecting
12.
[J
Stamp/Coin
Collecting
13.
[]
Crafts
14.
[J
Sewing/Needlework/Knitting
Travel
15.
[J
Airline
Club/Frequent
Flyer
16.
[J
Travel
in
USA
17.
[J
Foreign
Travel
18.
[J
Cruise
Ship
Vacations
19.
[]
RV
Vacations
20.
0
Casino
Gambling
Investing
and
Money
21.
0
Shopping
by
Catalog/Mail
Order
22.
0
Shopping
by
Internet
23.
0
Use
Credit
Cards
Regularly
24.
0
Donate
to
Charitable
Causes
25.
[]
Investments/Money
Making
Opportunities
26.
0
Contests/Sweepstakes
Great
Outdoors
27.
0
Hunting/Shooting
28.
0
Fishing
29.
[J
Camping/Hiking
30.
0
Wildlife/Environmental
Issues
31.
[]
Boating/Sailing
Sports,
Fitness
&
Health
32.
[]
Physical
Fitness/Exercise
33.
[]
Walking
for
Health
34.
[]
Health/Natural
Foods
35.
[]
DietinglWeight
Control
36.
[]
Self-Improvement
37.
[]
Golf
38.
[]
Biking
39.
[]
Snowboarding/Snow
skiing
40.
0
NASCAR
Thanks for taking the time to fill out this questionnaire. Your answers will be used for market research studies and reports. They will also allow you to receive important
mailings and special offers from a number of fine companies whose products and services relate directly to the specific interests, hobbies, and other information indicated
above. Through this selective program, you will be able to obtain more information about activities
in
which you are involved and less about those in which you are not.
Please check here if, for some reason, you would prefer
notto participate in this opportunity. 0
Please check here if you do not want to receive mailings and offers from Panasonic using your E-mail address. 0
Send
any
correspondence
about
our
product
to:
Panasonic
Consumer
Affairs
I
2F-3,
Panasonic
Consumer
Electronics
Company,
One
Panasonic
Way,
Secaucus,
NJ
07094
Copyright
©
2008
All
Rights
Reserved.
Please
seal
with
tape.
Do
not
staple.
Please
send
products
and
other
correspondence
to:
Panasonic
Consumer
Affairs
/
2F-3
Panasonic
Consumer
Electronics
Company
One
Panasonic
Way
Secaucus,
NJ
07094
EWN01
First-Class
Postage
Required
Post
Office
will
not
deliver
without
proper
postage.
PANASONIC CONSUMER
ELECTRONICS COMPANY
PO BOX 174287
DENVER CO 80217-4287
11,,1,11,
..
,,1,1,
,.111",1,1,,1,,1,11,
,1,1".11
..
1,1
•••
1.11,
,I
Panasonic
ideas
for
life
Panasonic
Product
Registration
THREE
IMPORTANT
REASONS
to
register
your
new
purchase
immediately:
1.
Protect
Your
New
Investment
Register
your
new
product
for
insurance
purposes
in
case
it
is
lost
or
stolen.
2.
Product
Safety
Notification
Registering
your
product
can
help
us
to
contact
you
in
the
unlikely
event
a
safety
notification
is
required
under
the
Consumer
Product
Safety
Act.
3.
Improved
Product
Development
Help
us
continue
to
design
products
that
meet
your
needs.
See
details
inside
...
Send
this
card
by
mail
or
register
via
the
Internet
at:
http://www.panasonic.com/register
VQC4172-1
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-FZ35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-FZ35 in the language / languages: English as an attachment in your email.

The manual is 5,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info