68868
143
Zoom out
Zoom in
Previous page
1/152
Next page
143
VQT1Z56
Others
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
When the mode dial is set to [¨], contents of the built-in memory will be displayed.
> Set the mode dial to anything except [¨].
Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P31, 124)
> When using a printer with a trimming or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P33)
AF assist lamp (P93) will turn on white in the dark place to assist the focusing.
Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P93)
The AF assist lamp does not turn on in bright places.
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The temperature of the camera may fall and the camera parts may not work well if you leave it
as it is after taking it out of water, snow etc. following use in a cold environment such as low
temperature water or on a snow-covered mountain etc. This is not a malfunction. The camera
will recover after returning to normal temperature.
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The card is not recognised by the PC. (The built-in memory is recognised.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
An unreadable language was selected by mistake.
White lamp may come on when the shutter button is pressed halfway.
The AF assist lamp does not turn on.
The camera becomes warm.
A part of the camera such as the zoom lever and card/battery door, and terminal
cover does not move.
The lens clicks.
DMC-FT1&TS1EB-VQT1Z56_eng.book 143 ページ 2009年2月2日 月曜日 午前9時47分
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-FT1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-FT1 in the language / languages: English as an attachment in your email.

The manual is 33,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-FT1

Panasonic DMC-FT1 User Manual - German - 193 pages

Panasonic DMC-FT1 User Manual - Dutch - 32 pages

Panasonic DMC-FT1 User Manual - French - 193 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info