99504
26
Zoom out
Zoom in
Previous page
1/28
Next page
Basic
Operating Instructions
Digital Camera
Model No.
DMC-FS42
DMC-FS4
EB
VQT2B55-1
Before use, please read these instructions completely.
Please also refer to Operating
Instructions (PDF format) recorded
on the CD-ROM containing the
Operating Instructions (supplied).
You can learn about advanced operation methods and
check the Troubleshooting.
Web Site: http://www.panasonic-europe.com
VQT2B55-1_DMC-FS42_EB_EN.indd 1VQT2B55-1_DMC-FS42_EB_EN.indd 1 2009/04/07 15:18:162009/04/07 15:18:16
2
VQT2B55 (ENG)
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Carefully observe copyright laws. Recording of pre-recorded tapes or discs or other
published or broadcast material for purposes other than your own private use may
infringe copyright laws. Even for the purpose of private use, recording of certain
material may be restricted.
Please note that the actual controls and components, menu items, etc. of your Digital
Camera may look somewhat different from those shown in the illustrations in these
Operating Instructions.
SDHC Logo is a trademark.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Other names, company names, and product names printed in these instructions are
trademarks or registered trademarks of the companies concerned.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL
BE EASILY ACCESSIBLE.
Product Identi cation Marking is located on the bottom of units.
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic Digital
Camera. Please read these Operating Instructions carefully and keep them handy for
future reference.
VQT2B55-1_DMC-FS42_EB_EN.indd 2VQT2B55-1_DMC-FS42_EB_EN.indd 2 2009/04/07 15:18:172009/04/07 15:18:17
3
(ENG) VQT2B55
Caution for AC Mains Lead
For your safety, please read the following
text carefully.
This appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
A 5-ampere fuse is tted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a
rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI
mark on the body of the fuse.
If the plug contains a removable fuse cover
you must ensure that it is re tted when the
fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be
purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG
IS UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY
13-AMPERE SOCKET.
If a new plug is to be tted please observe
the wiring code as stated below.
If in any doubt please consult a quali ed
electrician.
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Blue must be
connected to the terminal which is marked
with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be
connected to the terminal which is marked
with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL WHICH
IS MARKED WITH THE LETTER E, BY
THE EARTH SYMBOL
OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF–
KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug ( gures A and B).
Con rm the AC mains plug tted and follow
the instructions below. Illustrations may
differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach the
fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
VQT2B55-1_DMC-FS42_EB_EN.indd 3VQT2B55-1_DMC-FS42_EB_EN.indd 3 2009/04/07 15:18:172009/04/07 15:18:17
4
VQT2B55 (ENG)
About the battery pack
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Do not heat or expose to ame.
Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long
period of time with doors and windows closed.
Warning
Risk of re, explosion and burns. Do not disassemble, heat above 60 ºC or incinerate.
About the battery charger
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET
OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED.
TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS,
TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES,
ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.
The battery charger is in the standby condition when the AC power supply cord is
connected.
The primary circuit is always “live” as long as the power cord is connected to an
electrical outlet.
VQT2B55-1_DMC-FS42_EB_EN.indd 4VQT2B55-1_DMC-FS42_EB_EN.indd 4 2009/04/07 15:18:172009/04/07 15:18:17
5
(ENG) VQT2B55
– If you see this symbol –
Cautions for Use
Do not use any other cables except a genuine Panasonic AV cable (DMW-AVC1:optional).
Do not use any other USB connection cables except the supplied one.
Always use a genuine Panasonic AC adaptor (DMW-AC5E: optional).
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
Keep the camera as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
If you use the camera on top of or near a TV, the pictures and sound on the camera may
be disrupted by electromagnetic wave radiation.
Do not use the camera near cell phones because doing so may result in noise adversely
affecting the pictures and sound.
Recorded data may be damaged, or pictures may be distorted, by strong magnetic elds
created by speakers or large motors.
Electromagnetic wave radiation generated by microprocessors may adversely affect the
camera, disturbing the pictures and sound.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying
documents mean that used electrical and electronic products and
batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and
used batteries, please take them to applicable collection points, in
accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to
save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and
batteries, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please
contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to
discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
Cd
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In
this case it complies with the requirement set by the Directive for the
chemical involved.
VQT2B55-1_DMC-FS42_EB_EN.indd 5VQT2B55-1_DMC-FS42_EB_EN.indd 5 2009/04/07 15:18:172009/04/07 15:18:17
6
VQT2B55 (ENG)
If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-
AC5E: optional). Then reinsert the battery or reconnect AC adaptor and turn the camera
on.
Do not use the camera near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and
sound may be adversely affected.
Care of the camera
Do not strongly shake or bump the camera by dropping it etc.
This unit may malfunction, recording pictures may no longer be possible or the lens or
the LCD monitor may be damaged.
We strongly recommend you do not leave the camera in your trousers pocket when you
sit down or forcefully insert it into a full or tight bag etc.
Damage to the LCD monitor or personal injury may result.
Be particularly careful in the following places as they may cause this unit to
malfunction.
Places with a lot of sand or dust.
Places where water can come into contact with this unit such as when using it on a
rainy day or on a beach.
Do not touch the lens or the sockets with dirty hands. Also, be careful not to
allow liquids, sand and other foreign matter to get into the space around the lens,
buttons etc.
If water or seawater splashes on the camera, use a dry cloth to wipe the camera
body carefully.
About Condensation (When the lens is fogged up)
Condensation occurs when the ambient temperature or humidity changes. Be careful of
condensation since it causes lens stains, fungus and camera malfunction.
If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.
VQT2B55-1_DMC-FS42_EB_EN.indd 6VQT2B55-1_DMC-FS42_EB_EN.indd 6 2009/04/07 15:18:182009/04/07 15:18:18
7
(ENG) VQT2B55
About cards that can be used in this unit
You can use an SD Memory Card, an SDHC Memory Card and a MultiMediaCard (only
for DMC-FS4).
When the term card is used in these operating instructions this refers to the following
types of Memory Cards.
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
MultiMediaCard (Still pictures only)
More speci c information about memory cards that can be used with
this unit.
When you use a card of 4 GB or more capacity, you can use only
the SDHC Memory Card with SDHC logo that is based on the SD
Standard.
Please con rm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This Site is in English only.)
Keep the Memory Card out of reach of children to prevent swallowing.
About illustrations in these operating instructions
Please note that the appearance of the product, the illustration or the menu screen are a
little different from those in actual use.
The illustrations in these operating instructions show DMC-FS4.
VQT2B55-1_DMC-FS42_EB_EN.indd 7VQT2B55-1_DMC-FS42_EB_EN.indd 7 2009/04/07 15:18:182009/04/07 15:18:18
8
VQT2B55 (ENG)
Contents
Information for Your Safety .................................................................................................. 2
Standard Accessories......................................................................................................... 9
Names of the Components ............................................................................................... 10
Charging the Battery ........................................................................................................ 11
Inserting/Removing the Battery/Card (Optional) .............................................................. 13
Setting Date/Time (Clock Set) .......................................................................................... 14
About the Mode and Menu Operation .............................................................................. 15
Mode switching .......................................................................................................... 15
About the menu operation .......................................................................................... 16
Taking Pictures Using the Automatic Function (Auto Scene Mode) ................................. 17
Scene detection ......................................................................................................... 18
Taking Pictures with Your Favorite Settings (Normal Picture Mode) ................................. 19
Focusing ..................................................................................................................... 19
Playing Back Pictures (Normal Playback Mode) .............................................................. 20
Deleting Pictures ..............................................................................................................21
To delete a single picture ........................................................................................... 21
To delete multiple pictures (up to 50) or all the pictures ............................................. 21
Reading the Operating Instructions (PDF format) ............................................................ 22
Speci cations ................................................................................................................... 23
VQT2B55-1_DMC-FS42_EB_EN.indd 8VQT2B55-1_DMC-FS42_EB_EN.indd 8 2009/04/07 15:18:182009/04/07 15:18:18
9
(ENG) VQT2B55
1 DMW-BCF10E
4 K1HA08AD0001
6 VFC4297
2 DE-A60A
5 VFF0495
7 VGQ0D56
3 (DMC-FS42)
K2CT39A00002
(DMC-FS4)
K2CT3CA00004
Before using your camera, check the contents.
1 Battery Pack
(Indicated as battery in the text)
Charge the battery before use.
2 Battery Charger
(Indicated as charger in the text)
3 AC mains lead
4 USB Connection Cable
5 CD-ROM
• Software:
Use it to install the software to your PC.
• Operating Instructions:
6 Hand Strap
7 Battery Case
SD Memory Card, SDHC Memory Card and MultiMediaCard
(only for DMC-FS4) are indicated as card in the text.
Card is optional.
You can record or play back pictures on the built-in memory
when you are not using a card.
Consult the dealer or your nearest Service Centre if you lose
the supplied accessories. (You can purchase the accessories
separately.)
Optional Accessories
DC Coupler: DMW-DCC4
AC Adaptor: DMW-AC5EB
Soft Case: DMW-CS5
Semi Hard Case: DMW-CHFX30
AV Cable: DMW-AVC1
SDHC Memory Card
32 GB: RP-SDV32GE1K
16 GB: RP-SDV16GE1K
12 GB: RP-SDM12GE1K
8 GB: RP-SDV08GE1K
6 GB: RP-SDM06GE1K
4 GB: RP-SDM04GE1K/
RP-SDV04GE1K
SD Memory Card
2 GB: RP-SDM02GE1A/
RP-SDV02GE1A
1 GB: RP-SDR01GE1A
PC Card Adaptor: BN-SDPC2E
Some optional accessories may not be available in some
countries.
Standard Accessories
VQT2B55-1_DMC-FS42_EB_EN.indd 9VQT2B55-1_DMC-FS42_EB_EN.indd 9 2009/04/07 15:18:182009/04/07 15:18:18
10
VQT2B55 (ENG)
98
4
7
5
6
3
2
1
AV OUT
DIGITAL
10
16
14
13
11
15
17
12
18
1 Zoom lever
2 Shutter button
3 Camera ON/OFF switch
4 Microphone
5 Speaker
6 Self-timer indicator
AF assist lamp
7 Flash
8 Lens part
9 Lens barrel
10 LCD monitor
11 Recording/playback switch
12 Cursor buttons
A
:
e
/Exposure compensation
B
:
r
/Macro button
C
:
w
/Self-timer button
D
:
q
/Flash mode button
In these operating instructions, operations using the cursor buttons
are described as follows.
e.g.: When you press the
r
(
p
) button.
  
or Press
r
19 20
21
22
13 [MODE] button
14 [MENU/SET] button
15 [DISPLAY] button
16 [Q.MENU]/Delete button
17 Hand strap eyelet
Attach the strap when using the camera to prevent it from dropping.
18 [AV OUT/DIGITAL] socket
19 Tripod receptacle
When you use a tripod, make sure the tripod is stable with
the camera attached to it.
20 Card/Battery door
21 DC coupler cover
When using an AC adaptor, ensure that the Panasonic DC
coupler (DMW-DCC4; optional) and AC adaptor (DMW-
AC5E; optional) are used.
22 Release lever
Names of the Components
VQT2B55-1_DMC-FS42_EB_EN.indd 10VQT2B55-1_DMC-FS42_EB_EN.indd 10 2009/04/07 15:18:192009/04/07 15:18:19
11
(ENG) VQT2B55
About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10E.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead
to re or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
Use the dedicated charger and battery.
The battery is not charged when the camera is shipped. Charge the battery before
use.
Charge the battery with the charger indoors.
Charge the battery in a temperature between 10 °C to 35 °C. (The battery temperature
should also be the same.)
1
Attach the battery paying attention to the direction
of the battery.
2
Connect the charger to the electrical outlet.
Charging starts when the [CHARGE] indicator
A
lights
green.
Charging is complete when the [CHARGE] indicator
A
turns off (after approx. 130 min).
The AC cable does not t entirely into the AC input
terminal. A gap will remain as shown on the right.
3
Detach the battery after charging is completed.
When the [CHARGE] indicator ashes
The battery temperature is excessively high or low. The
charging time will be longer than normal. Also, charging may
not be completed.
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry
cloth.
Charging the Battery
VQT2B55-1_DMC-FS42_EB_EN.indd 11VQT2B55-1_DMC-FS42_EB_EN.indd 11 2009/04/07 15:18:192009/04/07 15:18:19
12
VQT2B55 (ENG)
Note
After charging is completed, be sure to disconnect the power supply device from the
electrical outlet.
The battery becomes warm after using it, and while and after charging. The camera also
becomes warm during use. This is not a malfunction.
The battery will be exhausted if left for a long period of time after being charged.
The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged. (The battery has characteristics that will reduce its operating duration and
cause the battery to swell up.)
When the operating time of the camera becomes extremely short even after properly
charging the battery, the life of the battery may have expired. Buy a new battery.
Do not leave any metal items (such as clips) near the contact areas of the power
plug. Otherwise, a re and/or electric shocks may be caused by short-circuiting or
the resulting heat generated.
Battery life
The number of recordable pictures (By CIPA standard in Normal Picture Mode [
1
])
Number of recordable
pictures
Approx. 390 pictures (DMC-FS42)
Approx. 410 pictures (DMC-FS4)
By CIPA standard in
Normal Picture Mode
Recording time
Approx. 195 min (DMC-FS42)
Approx. 205 min (DMC-FS4)
Recording conditions by CIPA standard
Temperature: 23 °C/Humidity: 50% when the LCD monitor is on.
Using a Panasonic SD Memory Card (32 MB)
Starting recording 30 seconds after the camera is turned on.
Recording once every 30 seconds, with full ash every second recording.
Rotating the zoom lever from Tele to Wide or vice versa in every recording.
Turning the camera off every 10 recordings. Leaving the camera until the battery cools down.
CIPA is an abbreviation of [Camera & Imaging Products Association].
The number of recordable pictures varies depending on the recording interval
time. If the recording interval time becomes longer, the number of recordable
pictures decreases. (e.g. When recording once every 2 minutes: about 1/4 of the
number when recording once every 30 seconds)
Playback time Approx. 420 min
The number of recordable pictures and playback time will vary depending on the
operating conditions and storing condition of the battery.
Charging
Charging time Approx. 130 min
Charging time and number of recordable pictures with the optional battery pack (DMW-
BCF10E) are the same as above.
The charging time will vary slightly depending on the status of the battery and the
conditions in the charging environment.
When the charging has been completed successfully, the [CHARGE] indicator turns off.
VQT2B55-1_DMC-FS42_EB_EN.indd 12VQT2B55-1_DMC-FS42_EB_EN.indd 12 2009/04/07 15:18:202009/04/07 15:18:20
13
(ENG) VQT2B55
Note
The battery may swell and its operating time may become shorter as the number of
times it is charged increases. For long term battery use, we recommend you do not
frequently charge the battery before it is exhausted.
The performance of the battery may temporarily deteriorate and the operating time may
become shorter in low temperature conditions (e.g. skiing/snowboarding).
Inserting/Removing the Battery/Card
(Optional)
Check that the camera is turned off.
We recommend using a Panasonic card.
1
Slide the release lever in the direction of
the arrow and open the card/battery door.
Always use genuine Panasonic batteries (DMW-
BCF10E).
If you use other batteries, we cannot guarantee
the quality of this product.
2
Battery: Insert it fully being careful about
the direction for insert. Pull the lever
A
in the direction of the arrow to remove
the battery. Card: Push it fully until it
clicks being careful about the direction
for insert. To remove the card, push the
card until it clicks, then pull the card out
upright.
B
Do not touch the connection terminals of the
card.
The card may be damaged if it is not fully inserted.
3
1
: Close the card/battery door.
2
: Slide the release lever in the direction
of the arrow.
If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
VQT2B55-1_DMC-FS42_EB_EN.indd 13VQT2B55-1_DMC-FS42_EB_EN.indd 13 2009/04/07 15:18:202009/04/07 15:18:20
14
VQT2B55 (ENG)
Setting Date/Time
(Clock Set)
The clock is not set when the camera is shipped.
A
B
ON
OFF
1
Turn the camera on.
When you turn the camera on, [PLEASE SET THE
CLOCK] message appears. (It does not appear in
Playback Mode.)
A
[MENU/SET] button
B
Cursor buttons
2
Press [MENU/SET].
C
q
D
w
3
Press
w
/
q
to select the items (year, month, day, hour, minute, display
sequence or time display format), and press
e
/
r
to set.
C
Time at the home area
D
Time at the travel destination
4
: Cancel without setting the clock.
Select either [24HRS] or [AM/PM] for the
time display format.
AM/PM is displayed when [AM/PM] is
selected.
4
Press [MENU/SET].
After completing the clock settings, turn the camera off. Then turn the camera
back on, switch to Recording Mode, and check that the display re ects the
settings that were performed.
When [MENU/SET] has been pressed to complete the settings without the clock
having been set, set the clock correctly by following the “Changing the clock
setting” procedure.
Changing the clock setting
1
Press [MENU/SET] in Normal Picture Mode.
2
Press
e
/
r
to select [CLOCK SET].
3
Press
q
and perform steps
3
and
4
for setting.
4
Press [MENU/SET] to close the menu.
You can also set the clock in the [SETUP] menu.
The clock setting is maintained for 3 months using the built-in clock battery even without
the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in
battery.)
VQT2B55-1_DMC-FS42_EB_EN.indd 14VQT2B55-1_DMC-FS42_EB_EN.indd 14 2009/04/07 15:18:212009/04/07 15:18:21
15
(ENG) VQT2B55
About the Mode and Menu Operation
Mode switching
MODE
1
Slide the recording/playback switch
A
to
1
(right) or
5
(left).
1
: Recording Mode
5
: Playback Mode
MODE
2
Press [MODE] to display the mode
selection screen.
(Example: Normal Picture Mode)
3
Press
e
/
r
to select a mode and press
[MENU/SET] to close the menu.
List of Recording Modes
;
Auto Scene Mode Taking pictures easily.
1
Normal Picture Mode Taking pictures in the desired setting.
5
Scene Mode Taking pictures according to the scene.
6
Motion Picture Mode
This mode allows you to record motion pictures
with audio.
List of Playback Modes
9
Normal Play Mode Playing back the pictures normally.
8
Slide Show Mode Playing back the pictures continuously.
z
Favorite Play Mode
Playing back the pictures set as your favorite.
Pictures do not appear when the [FAVORITE]
is set to [OFF].
VQT2B55-1_DMC-FS42_EB_EN.indd 15VQT2B55-1_DMC-FS42_EB_EN.indd 15 2009/04/07 15:18:222009/04/07 15:18:22
16
VQT2B55 (ENG)
About the menu operation
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
In Recording Mode
In Playback Mode
1
[REC] menu
9
[PLAYBACK] menu
This menu lets you set the coloring, sensitivity,
or number of pixels, etc. of the pictures you are
recording.
This menu lets you make the protection or
print settings, etc. of recorded pictures.
e
[SETUP] menu
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
Available in Recording or Playback Mode.
How to use the menu
1
Press [MENU/SET] to display the menu.
You can switch menu screens by the page from
any menu item by rotating the zoom lever.
(Example: Selecting the Normal Picture Mode
[
1
])
2
Press
e
/
r
to select a menu item.
(Example: Selecting [AF MODE])
You can move to the next page by pressing
r
at
the very bottom.
3
Press
q
.
Depending on the item, the settings may not
appear or it may be displayed in a different way.
4
Press
e
/
r
to select a setting.
(Example: Selecting [
3
])
5
Press [MENU/SET] to con rm your
setting.
6
Press [MENU/SET] to close the menu.
VQT2B55-1_DMC-FS42_EB_EN.indd 16VQT2B55-1_DMC-FS42_EB_EN.indd 16 2009/04/07 15:18:232009/04/07 15:18:23
17
(ENG) VQT2B55
Switching to the [SETUP] menu
When the camera shows the menu screen after step
1
on “How to use the menu”:
1
Press
w
to move the menu icon.
2
Press
r
to select the [SETUP] menu icon [
e
].
3
Press
q
to move to the menu item list.
Proceed to step
2
on “How to use the menu”.
Taking Pictures Using the Automatic Function
(Auto Scene Mode)
Recording Mode:
;
The camera automatically sets the appropriate settings according to the subject and
recording condition. This mode is recommended for beginners to take pictures easily.
MODE
The following functions are activated automatically.
Scene detection/Face detection/Motion
detection/Backlight Compensation
A
Shutter button
B
Recording/playback switch
1
Slide the recording/playback switch
to [
1
] and press [MODE].
2
Press
e
/
r
to select [AUTO SCENE MODE] and
then press [MENU/SET].
3
Hold this unit gently with both hands, keep your
arms still at your side and stand with your feet
slightly apart.
C
Flash
D
AF assist lamp
VQT2B55-1_DMC-FS42_EB_EN.indd 17VQT2B55-1_DMC-FS42_EB_EN.indd 17 2009/04/07 15:18:242009/04/07 15:18:24
18
VQT2B55 (ENG)
4
Press the shutter button halfway to focus.
The focus indication
E
lights green when the subject is focused.
F
E
The AF area
F
is displayed around the subject’s
face by the face detection function. In other cases,
it is displayed at the point on the subject which is in
focus.
The focus range is 5 cm (0.17 feet)(Wide)/50 cm
(1.64 feet)(Tele) to
7
.
The maximum close-up distance (the shortest
distance at which the subject can be taken) differs
depending on the zoom magni cation.
5
Press the shutter button fully (push it in further), and take
the picture.
The access indication lights red when pictures are being recorded on
the built-in memory (or the card).
Scene detection
When the camera identi es the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its color changes to the usual red.
;
3
[i-PORTRAIT]
4
[i-SCENERY]
2
[i-MACRO]
5
[i-NIGHT PORTRAIT] Only when [
q
] is selected
1
[i-NIGHT SCENERY] Only when [
o
] is selected
• [
;
] is set if none of the scenes are applicable, and the standard settings are set.
Face detection
When [
3
] or [
5
] is selected, the camera automatically detects
a person’s face, and it will adjust the focus and exposure.
Note
Due to conditions such as the ones below, a different scene may
be identi ed for the same subject.
Subject conditions: When the face is bright or dark, The size of the subject, The
distance to the subject, The contrast of the subject, When the subject is moving, When
zoom is used
Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the
camera is shaken
To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate Recording Mode.
The backlight compensation
Backlight refers to when light comes from the back of a subject.
In this case, the subject will become dark, so this function compensates the backlight by
brightening the whole of the picture automatically.
VQT2B55-1_DMC-FS42_EB_EN.indd 18VQT2B55-1_DMC-FS42_EB_EN.indd 18 2009/04/07 15:18:252009/04/07 15:18:25
19
(ENG) VQT2B55
Taking Pictures with Your Favorite Settings
(Normal Picture Mode)
Recording Mode:
1
This mode allows you to take pictures freely as more options are available than Auto
Scene Mode [
;
].
MODE
1
Slide the recording/playback switch to [
1
]
and press [MODE].
A
Recording/playback switch
2
Press
e
/
r
to select [NORMAL PICTURE]
and press [MENU/SET].
3
Aim the AF area to the point you want to
focus on.
4
Press the shutter button
B
halfway to focus.
The focus indication (green) lights when the subject is focused.
The focus range is 50 cm (1.64 feet) to
7
.
5
Press the shutter button fully (push it in further), and take
the picture.
The access indication lights red when a picture is being recorded on
the built-in memory (or the card).
Focusing
Aim the AF area at the subject, and then press the shutter button halfway.
Focus When the subject
is focused
When the subject
is not focused
Focus indication On Blinks
AF area White
Green White
Red
Sound Beeps 2 times Beeps 4 times
C
Focus indication
D
AF area (normal)
E
AF area (when using the digital zoom or when it is dark)
VQT2B55-1_DMC-FS42_EB_EN.indd 19VQT2B55-1_DMC-FS42_EB_EN.indd 19 2009/04/07 15:18:272009/04/07 15:18:27
20
VQT2B55 (ENG)
Playing Back Pictures
(Normal Playback Mode)
Playback Mode:
9
A
1
Slide the recording/playback switch
A
to [
5
].
Normal playback is set automatically in the following
cases:
When the mode was switched to the Playback Mode.
When the camera was turned on while the recording/
playback switch was at [
5
].
2
Press
w
/
q
to select the picture.
B
C
w
: Play back the previous picture
q
: Play back the next picture
Speed of picture forwarding/rewinding
changes depending on the playback status.
Fast forwarding/Fast rewinding
Press and hold
w
/
q
during playback.
• The le number
B
and the picture number
C
only
change one by one.
Release
w
/
q
when the number of the desired picture appears to play back the picture.
If you keep pressing
w
/
q
, the number of pictures forwarded/rewound increases.
VQT2B55-1_DMC-FS42_EB_EN.indd 20VQT2B55-1_DMC-FS42_EB_EN.indd 20 2009/04/07 15:18:282009/04/07 15:18:28
21
(ENG) VQT2B55
Deleting Pictures
Playback Mode:
9
z
Once deleted, pictures cannot be recovered.
Pictures on the built-in memory or the card, which are being played back, will be deleted.
To delete a single picture
DISPLAY
1
Select the picture to be deleted, and then press
[
4
].
2
Press
w
to select [YES] and then press
[MENU/SET].
To delete multiple pictures (up to 50) or all the pictures
1
Press [
4
].
2
Press
e
/
r
to select [DELETE MULTI] or [DELETE ALL] and then
press [MENU/SET].
• [DELETE ALL]
step
5
.
DISPLAY
3
Press
e
/
r
/
w
/
q
to select the picture and
then press [DISPLAY] to set. (Repeat
this step.)
The selected pictures appear with [
b
]. When
[DISPLAY] is pressed again, the setting is
canceled.
4
Press [MENU/SET].
5
Press
e
to select [YES] and then press [MENU/SET] to set.
VQT2B55-1_DMC-FS42_EB_EN.indd 21VQT2B55-1_DMC-FS42_EB_EN.indd 21 2009/04/07 15:18:282009/04/07 15:18:28
22
VQT2B55 (ENG)
Reading the Operating Instructions
(PDF format)
You have practised the basic operations introduced in these operating instructions and
want to progress to advanced operations.
You want to check the Troubleshooting.
In these kinds of situations refer to Operating Instructions (PDF format) recorded on the
CD-ROM containing the Operating Instructions (supplied).
[Windows]
1
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
2
Click [Operating Instructions / Manuel d’utilisation].
A
3
Select the desired language and
then click [Operating Instructions]
to install.
(Example: When an English language OS)
A
To return to the install menu
4
Double click the “Operating
Instructions” shortcut icon on the
desktop.
When the Operating Instructions (PDF format) will not open
You will need Adobe Acrobat Reader 4.0 or later to browse or print the Operating
Instructions (PDF format). Follow the instructions below for your OS to install it.
If using Windows 2000 SP4/Windows XP SP2 or SP3/Windows Vista and SP1
Insert the CD-ROM containing the Operating Instructions (supplied), click [Adobe(R)
Reader(R)] and then follow the messages on the screen to install.
If using Windows 98/98SE/Me
Download and install a version of Adobe Reader that you can use with your OS from the
following Web Site.
http://www.adobe.com/products/acrobat/readstep2_allversions.html
To uninstall the Operating Instructions (PDF format)
Delete the PDF le from the “Program Files\Panasonic\Lumix\” folder.
When the contents in the Program Files folder cannot be displayed, click the [Show the
contents of this folder] to display them.
[Macintosh]
1
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
2
Open the “Manual” folder in CD-ROM and then copy the PDF le with
the desired language inside the folder.
3
Double click the PDF le to open it.
VQT2B55-1_DMC-FS42_EB_EN.indd 22VQT2B55-1_DMC-FS42_EB_EN.indd 22 2009/04/07 15:18:302009/04/07 15:18:30
23
(ENG) VQT2B55
Speci cations
Digital Camera: Information for your safety
Power Source: DC 5.1 V
Power Consumption: 1.1 W (When recording) (DMC-FS42)/
1.0 W (When recording) (DMC-FS4)
0.5 W (When playing back)
Camera Effective pixels: 10,100,000 pixels (DMC-FS42)/
8,100,000 pixels (DMC-FS4)
Image sensor: 1/2.5˝ CCD
Total pixels: 10,300,000 pixels (DMC-FS42)/
8,320,000 pixels (DMC-FS4)
Primary color lter
Lens: Optical 4 × zoom, f=5.5 to 22 mm [35 mm lm camera
equivalent: 33 to 132 mm] / F2.8 to F5.9
Digital zoom: Max. 4 ×
Extended optical zoom: Max. 7.1 × (DMC-FS42)/
Max. 6.4 × (DMC-FS4)
Focus: Normal / Macro
Face detection / 9-area-focusing / 1-area-focusing
Focus range: Normal :
50 cm (1.64 feet) to
7
Macro / Auto scene :
5 cm (0.17 feet) (Wide) / 50 cm (1.64 feet) (Tele) to
7
Scene mode: settings may be different to those shown above
Shutter system: Electronic shutter+Mechanical shutter
Motion picture recording:
[WVGA] 848 × 480 pixels (30 frames/second) (When a card is used.)
[VGA] 640 × 480 pixels (30 frames/second) (When a card is used.)
[QVGA] 320 × 240 pixels (30 frames/second)
With audio
¼
Motion pictures can be recorded continuously for up to 15
minutes. Also, continuous recording exceeding 2 GB is
not possible.
Remaining time for continuous recording is displayed on
the screen.
VQT2B55-1_DMC-FS42_EB_EN.indd 23VQT2B55-1_DMC-FS42_EB_EN.indd 23 2009/04/07 15:18:312009/04/07 15:18:31
24
VQT2B55 (ENG)
Burst recording
Burst speed: Approx. 2.3 pictures/second (DMC-FS42)/
Approx. 3 pictures/second (DMC-FS4) (NORMAL),
Approx. 1.7 pictures/second (DMC-FS42)/
Approx. 2 pictures/second (DMC-FS4) (Unlimited)
Number of recordable
pictures:
Max. 5 pictures (DMC-FS42)/
Max. 7 pictures (DMC-FS4) (Standard),
Max. 3 pictures (DMC-FS42)/
Max. 4 pictures (DMC-FS4) (Fine),
Depends on the remaining capacity of the built-in memory or the
card (Unlimited).
Hi-speed burst
Burst speed: Approx. 6 pictures/second (DMC-FS42)/
Approx. 5.5 pictures/second (DMC-FS4)
Picture size:
[
+
3M], [
*
2.5M] or [
}
2M] is selected as the picture size.
Number of recordable
pictures:
When using the built-in memory:
Approx. 10 pictures (immediately after formatting)
When using a Card:
Max. 100 pictures (differs depending on the type of Card and
the recording conditions)
ISO sensitivity: i.AUTO/ 80 / 100 / 200 / 400 / 800 / 1000
[HIGH SENS.] mode: 1600 to 6400
Shutter speed: 8 seconds to 1/2,000th of a second
[STARRY SKY] mode:15 seconds, 30 seconds, 60 seconds
White balance:
Auto white balance / Daylight / Cloudy / Shade / Halogen / White set
Exposure (AE): Program AE
Exposure compensation (1/3 EV Step, -2 EV to +2 EV)
Metering mode: Multiple
LCD monitor: TFT LCD 2.5˝ (Approx. 230,000 dots) ( eld of view ratio
about 100%)
Flash: Flash range:
Approx. 30 cm (0.99 feet) to 6.3 m (20.7 feet) (Wide [i.AUTO])
AUTO, AUTO / Red-eye reduction, Forced ON (Forced ON /
Red-eye reduction), (Slow sync. / Red-eye reduction), Forced OFF
Microphone: Monaural
Speaker: Monaural
Recording media: Built-in Memory (Approx. 50 MB) / SD Memory Card /
SDHC Memory Card / MultiMediaCard (only for DMC-FS4)
(Still pictures only)
VQT2B55-1_DMC-FS42_EB_EN.indd 24VQT2B55-1_DMC-FS42_EB_EN.indd 24 2009/04/07 15:18:312009/04/07 15:18:31
25
(ENG) VQT2B55
Picture size
Still picture: [
+
10M] 3648 × 2736 pixels (DMC-FS42),
[
+
8M] 3264 × 2448 pixels (DMC-FS4),
[
+
5M] 2560 × 1920 pixels,
[
+
3M] 2048 × 1536 pixels
[
*
9M] 3648 × 2432 pixels (DMC-FS42),
[
*
7M] 3264 × 2176 pixels (DMC-FS4),
[
*
2.5M] 2048 × 1360 pixels
[
}
7.5M] 3648 × 2056 pixels (DMC-FS42),
[
}
6M] 3264 × 1840 pixels (DMC-FS4),
[
}
2M] 1920 × 1080 pixels
Motion pictures: [WVGA] 848 × 480 pixels (When a card is used.),
[VGA] 640 × 480 pixels (When a card is used.),
[QVGA] 320 × 240 pixels
Quality: Fine/Standard
Recording le format
Still Picture: JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.21” standard)/DPOF corresponding
Motion pictures: “QuickTime Motion JPEG” (motion pictures with audio)
Interface
Digital: USB 2.0 (Full Speed)
¼
Data from the PC cannot be written onto the camera
using the USB connection cable.
Analog video / audio:
PAL / NTSC Composite (Switched by menu), Audio line output (monaural)
Terminal
AV OUT/DIGITAL: Dedicated jack (8 pin)
Dimensions: 97.6 mm (W) × 55.4 mm (H) × 22.3 mm (D)
(3.84˝ (W) × 2.18˝ (H) × 0.88˝ (D))
(excluding the projection part)
Mass (Weight): Approx. 112
g
/3.95 oz
(excluding Memory Card and battery)
Approx. 134
g
/4.72 oz
(with Memory Card and battery)
Operating Temperature: 0 °C to 40 °C
Operating Humidity: 10% to 80%
VQT2B55-1_DMC-FS42_EB_EN.indd 25VQT2B55-1_DMC-FS42_EB_EN.indd 25 2009/04/07 15:18:312009/04/07 15:18:31
26
VQT2B55 (ENG)
Battery Charger
(Panasonic DE-A60A): Information for your safety
Input: 110 V to 240 V
50/60 Hz, 0.2 A
Output: CHARGE 4.2 V
0.65 A
Equipment mobility: Movable
Battery Pack
(lithium-ion)
(Panasonic
DMW-BCF10E): Information for your safety
Voltage/capacity
(Minimum): 3.6 V/940 mAh
VQT2B55-1_DMC-FS42_EB_EN.indd 26VQT2B55-1_DMC-FS42_EB_EN.indd 26 2009/04/07 15:18:312009/04/07 15:18:31
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-FS42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-FS42 in the language / languages: English as an attachment in your email.

The manual is 9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-FS42

Panasonic DMC-FS42 User Manual - German - 26 pages

Panasonic DMC-FS42 User Manual - Dutch - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info