659196
85
Zoom out
Zoom in
Previous page
1/94
Next page
VQT2M98 85
Try checking these items (84 - 89) first.
(Restoring menu settings to default values may solve certain problems.
Try using [RESET] in [SETUP] menu in Recording Mode (20).)
Recording (continued)
Recorded pictures are blurred. Optical Image Stabilizer ineffective.
Shutter speed is slower in dark locations and Optical Image Stabilizer is less effective.
Hold camera firmly with both hands, keeping arms close to body.
Set [DIGITAL ZOOM] to [OFF] and [SENSITIVITY] to [
]. (30, 54)
Recorded pictures appear coarse, or there is interference.
ISO Sensitivity is high, or shutter speed is low.
(Default [SENSITIVITY] setting is [
] – interference may appear with indoor pictures.)
Lower [SENSITIVITY] (54).
Set [COLOR MODE] to [NATURAL] (58).
Take pictures in brighter locations.
Camera set to [HIGH SENS.] or [HI-SPEED BURST] Scene Modes.
(Picture becomes slightly coarser in response to high sensitivity)
Pictures appear dark or have poor coloring.
Colors may appear unnatural due to the effects of light source.
Use [WHITE BALANCE] to adjust the coloring. (55)
Brightness or coloring of recorded picture different from real life.
Taking pictures under fluorescent lighting may require a faster shutter speed and result in slightly
changed brightness or coloring, but this is not a fault.
Red banding may appear on the LCD monitor or part or the entire
screen may have a reddish tint, when recording or pressing the shutter
button halfway.
This is a characteristic of CCD and may appear if subject contains brighter
areas. Some blurring may occur around these areas, but this is not a fault. This
will be recorded in motion pictures, but not in still pictures.
We recommend keeping the screen away from strong light sources such as
sunlight when taking pictures.
Motion picture recording stops midway.
With some cards, access display may appear briefly after recording, and recording may end midway.
When recording motion picture, use a card rated with an SD speed class
of ‘Class 6’ or higher.
SD speed class refers to a specification for sustained write speeds.
If recording stops even when using a card with speed of ‘Class 6’ or faster, the data writing speed is
low. We recommend backing up the data on the memory card and reformatting it. (21)
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-FP2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-FP2 in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-FP2

Panasonic DMC-FP2 User Manual - German - 94 pages

Panasonic DMC-FP2 User Manual - Dutch - 94 pages

Panasonic DMC-FP2 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info