672114
49
Zoom out
Zoom in
Previous page
1/68
Next page
49
DVQX1413 (FRE)
Wi-Fi/Bluetooth
Si vous utilisez un appareil Android, suivez les étapes jusqu’ici pour
terminer la configuration.
Avancez jusqu’aux étapes ci-dessous uniquement si vous utilisez un
appareil iOS.
Si [Mot de passe Wi-Fi] (→50) est réglé sur [NON] sur l’appareil photo,
sélectionnez [Config Wi-Fi]. (Au moment de l’achat, [Mot de passe Wi-Fi] est
réglé sur [NON].)
Si [Mot de passe Wi-Fi] est réglé sur [OUI] sur l’appareil photo, vous devez
installer le profil.
Installez le profil
Si le téléphone intelligent est bloqué par un mot de passe, entrez-le
pour le débloquer.
Fermez le navigateur.
5
Activez la fonction Wi-Fi dans le menu de réglage.
6
Sur l’écran de réglage Wi-Fi, sélectionnez
le SSID affiché sur l’appareil photo (le nom
d’appareil sélectionné à l’étape
4
).
Si le SSID ne s’affiche pas, il se peut qu’il s’affiche
après désactivation, puis activation de la fonction Wi-Fi.
Si vous devez changer d’appareil connecté, suivez le
message à l’écran pour modifier le réglage.
7
Démarrez « Image App ».
Le téléphone intelligent couplé sera enregistré en tant qu’appareil couplé
après la connexion via Wi-Fi.
Pour établir une connexion avec le téléphone intelligent couplé pour la deuxième
fois et les suivantes, activez la fonction Bluetooth de l’appareil photo et réglez
Bluetooth pour « Image App » sur votre téléphone intelligent sur ON. Puis,
sélectionnez un appareil photo (nom d’appareil) à connecter dans la liste
[Appareil enregistré].
L’icône [ ] s’affiche sur l’écran d’enregistrement lorsqu’un périphérique Bluetooth
est connecté. Si la fonction Bluetooth est activée, mais que le téléphone
intelligent n’est pas connecté, l’icône [
] affichée est semi-transparente.
Si le couplage entre un téléphone intelligent et un appareil photo prend un
certain temps, supprimez les informations de couplage des deux appareils et
enregistrez-les à nouveau. Cela pourrait permettre aux appareils d’être reconnus
correctement.
49


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-dc-tz202

Reset search

  • My camera says it This memory card is write protected. It will not work help please Submitted on 18-3-2022 at 13:45

    Reply Report abuse
    • It is possible to insert the SD card incorrectly. Unfortunately, this is not prevented mechanically. A contact in the device is bent by pressing it in forcefully. This results in this (actually wrong) message. I had the problem. I was able to exchange the Panasonic DC TZ202 as a gesture of goodwill.
      Now my son has made about 2 years later exactly the same error.
      I could not find a service manual, which gives hints if and how to "open" the camera so far to possibly straighten the bent contact.
      The error message by the device the SD card is write-protected, is wrong, the device has no "possibility" to detect the mechanical error.

      With a little skill, you can see the bent contact in the empty SD slot.



      Translated with www.DeepL.com/Translator (free version) Answered on 2-4-2023 at 23:07

      Vote up Report abuse
  • My camera won’t work. ReadsThis memory card is write protected. Same memory card I usually use. Help.please need my camera Submitted on 18-3-2022 at 13:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DC-TZ202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DC-TZ202 in the language / languages: French as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DC-TZ202

Panasonic DC-TZ202 Quick start guide - English - 68 pages

Panasonic DC-TZ202 User Manual - English - 309 pages

Panasonic DC-TZ202 Quick start guide - German - 68 pages

Panasonic DC-TZ202 User Manual - German - 309 pages

Panasonic DC-TZ202 Quick start guide - Dutch - 68 pages

Panasonic DC-TZ202 User Manual - Dutch - 309 pages

Panasonic DC-TZ202 User Manual - French - 309 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info