672114
293
Zoom out
Zoom in
Previous page
1/309
Next page
293
Autres
Questions/Réponses Dépannage
Enregistrement
Sous un éclairage fluorescent, un dispositif d’éclairage à DEL, etc., il se peut que des bandes
s’affichent ou que l’affichage vacille.
Cela est une caractéristique des capteurs MOS utilisés sur cet appareil photo.
Il ne s’agit pas d’un dysfonctionnement.
Si vous enregistrez des images fixes à l’aide de l’obturateur électronique, l’effet
de bandes peut être réduit en abaissant la vitesse d’obturation. (→59)
Si un vacillement notable ou si des bandes sont visibles dans des conditions
d’éclairage comme celles d’un dispositif fluorescent ou à DEL alors que vous
utilisez le mode d’enregistrement d’images animées, vous pouvez les réduire
en configurant [Reduc. scint.] (→179) et en verrouillant la vitesse d’obturation.
Il est possible de sélectionner une vitesse d’obturation dans [1/50], [1/60],
[1/100] ou [1/120]. Vous pouvez régler la vitesse d’obturation manuellement en
mode Films Créatifs. (→77)
Impossible d’enregistrer d’images. L’obturateur ne se déclenche pas immédiatement lorsque
vous appuyez sur la touche d’obturateur.
Lorsque [Priorité AF/Décl.] est réglé sur [FOCUS], l’appareil photo n’enregistre pas tant que la
bonne mise au point n’est pas obtenue. (→184)
Les images enregistrées sont blanchâtres.
L’objectif est sale (empreintes digitales, etc.).
Mettez l’appareil photo sous tension pour faire sortir le barillet d’objectif, et nettoyez la surface
de l’objectif à l’aide d’un chiffon doux et sec.
Les images enregistrées sont trop lumineuses/sombres.
Le verrouillage EA (→99) est mal réglé.
L’appareil photo prend plusieurs images même si je n’appuie qu’une fois sur la touche
d’obturateur.
Le mode d’entraînement est réglé sur un autre mode que [Simple]. (→123)
L’enregistrement avec bracketing est réglé. (→127)
La mise au point ne s’effectue pas correctement.
Le sujet ne se trouve pas dans la plage de mise au point.
[Priorité AF/Décl.] est réglé sur [RELEASE]. (→184)
[Déclench. AF] est réglé sur [NON]. (→182)
Le verrouillage MPA (→99) est mal réglé.
S’il y a des traces de doigts ou de la saleté sur l’objectif, il se peut que la mise au point se fasse
sur l’objectif et non sur le sujet.
Les images enregistrées sont floues. La fonction de stabilisateur est sans effet.
La vitesse d’obturation est plus lente dans les endroits sombres et la fonction de stabilisateur est
moins efficace.
Utilisez un trépied et le retardateur (→126) lorsque vous utilisez une vitesse d’obturation plus
lente.
293


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-dc-tz202

Reset search

  • My camera says it This memory card is write protected. It will not work help please Submitted on 18-3-2022 at 13:45

    Reply Report abuse
    • It is possible to insert the SD card incorrectly. Unfortunately, this is not prevented mechanically. A contact in the device is bent by pressing it in forcefully. This results in this (actually wrong) message. I had the problem. I was able to exchange the Panasonic DC TZ202 as a gesture of goodwill.
      Now my son has made about 2 years later exactly the same error.
      I could not find a service manual, which gives hints if and how to "open" the camera so far to possibly straighten the bent contact.
      The error message by the device the SD card is write-protected, is wrong, the device has no "possibility" to detect the mechanical error.

      With a little skill, you can see the bent contact in the empty SD slot.



      Translated with www.DeepL.com/Translator (free version) Answered on 2-4-2023 at 23:07

      Vote up Report abuse
  • My camera won’t work. ReadsThis memory card is write protected. Same memory card I usually use. Help.please need my camera Submitted on 18-3-2022 at 13:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DC-TZ202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DC-TZ202 in the language / languages: French as an attachment in your email.

The manual is 9,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DC-TZ202

Panasonic DC-TZ202 Quick start guide - English - 68 pages

Panasonic DC-TZ202 User Manual - English - 309 pages

Panasonic DC-TZ202 Quick start guide - German - 68 pages

Panasonic DC-TZ202 User Manual - German - 309 pages

Panasonic DC-TZ202 Quick start guide - Dutch - 68 pages

Panasonic DC-TZ202 User Manual - Dutch - 309 pages

Panasonic DC-TZ202 Quick start guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info