Manual Panasonic DC-TZ202 (page 293 of 309) (English)

672114

293

Zoom out

Zoom in

Previous page

1/309

Next page

293

Others

Q&A Troubleshooting

■

Recording

Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting

fixture.

• This is characteristic of MOS sensors which serve as the camera’s pickup

sensors. This is not a malfunction.

• If you are taking still pictures using the electronic shutter, the striping may be

reduced by setting a slower shutter speed. (→59)

• When noticeable flicker or striping is seen under lighting such as a fluorescent

or LED lighting fixture in the motion picture recording mode, you can reduce

the flicker or striping by setting up [Flkr Decrease] (→179) and fixing the

shutter speed. It is possible to select a shutter speed from [1/50], [1/60],

[1/100], or [1/120]. You can set the shutter speed manually in the Creative

Video Mode. (→77)

Cannot record pictures. The shutter will not operate immediately when the shutter button is

pressed.

• When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper focusing is

achieved. (→184)

Recorded pictures look white.

• Lens is dirty (fingerprints, etc.).

→ Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth.

Recorded pictures are too bright/too dark.

• AE Lock (→99) is set inappropriately.

Some pictures are taken when I press the shutter button just once.

• Drive Mode is set to other than [Single]. (→123)

• Bracket recording is set. (→127)

Focus not aligned correctly.

• Subject outside of focus range.

• [Focus/Release Priority] is set to [RELEASE]. (→184)

• [Shutter AF] is set to [OFF]. (→182)

• AF Lock (→99) is set inappropriately.

• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.

Recorded pictures are blurred. The stabiliser function ineffective.

• Shutter speed is slower in dark locations and the stabiliser function is less effective.

→ Use a tripod and the self-timer (→126) when using a slower shutter speed.

1

My camera says it This memory card is write protected. It will not work help please Submitted on 18-3-2022 at 13:45
Reply Report abuse
- It is possible to insert the SD card incorrectly. Unfortunately, this is not prevented mechanically. A contact in the device is bent by pressing it in forcefully. This results in this (actually wrong) message. I had the problem. I was able to exchange the Panasonic DC TZ202 as a gesture of goodwill.
  Now my son has made about 2 years later exactly the same error.
  I could not find a service manual, which gives hints if and how to "open" the camera so far to possibly straighten the bent contact.
  The error message by the device the SD card is write-protected, is wrong, the device has no "possibility" to detect the mechanical error.
  
  With a little skill, you can see the bent contact in the empty SD slot.
  
  Translated with www.DeepL.com/Translator (free version) Answered on 2-4-2023 at 23:07
  Vote up Report abuse
My camera won’t work. ReadsThis memory card is write protected. Same memory card I usually use. Help.please need my camera Submitted on 18-3-2022 at 13:40
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Panasonic DC-TZ202 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DC-TZ202 in the language / languages: English as an attachment in your email.

The manual is 9,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DC-TZ202

Panasonic DC-TZ202 Quick start guide - English - 68 pages

Panasonic DC-TZ202 Quick start guide - German - 68 pages

Panasonic DC-TZ202 User Manual - German - 309 pages

Panasonic DC-TZ202 Quick start guide - Dutch - 68 pages

Panasonic DC-TZ202 User Manual - Dutch - 309 pages

Panasonic DC-TZ202 Quick start guide - French - 68 pages

Panasonic DC-TZ202 User Manual - French - 309 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info