453756
30
Zoom out
Zoom in
Previous page
1/64
Next page
30
Condizione
Condizione
Causa
Causa
Sembra che dall’unità interna fuoriesca della
nebbia.
Effetto di condensa dovuto al processo di raffreddamento.
Rumore di acqua durante il funzionamento. Flusso del refrigerante all’interno dell’unità.
L’ambiente ha un odore particolare. Può essere dovuto a un odore di umido proveniente dai muri, ai tappeti,
dai mobili o dagli indumenti presenti nella stanza.
La ventola interna si arresta di tanto in tanto
quando si imposta la modalità di regolazione
automatica della velocità della ventola.
Ciò consente di eliminare gli odori circostanti.
L’operazione è ritardata di qualche minuto
dopo il riavvio.
Il ritardo è una protezione del compressore dell’apparecchio.
Dall’unità esterna fuoriesce acqua/vapore. Condensa o evaporazione nei condotti.
L’indicatore Timer rimane sempre acceso. L’impostazione Timer si ripete quotidianamente una volta impostata.
La ventola interna si arresta di tanto in tanto
quando si imposta la modalità riscaldamento.
Funzionalità studiata per evitare un effetto di raffreddamento non
intenzionale.
Durante questa fase potrebbero udirsi dei
crepitii.
I cambiamenti di temperatura causano l’espansione/contrazione
dell’unità.
L’unità commuta sul funzionamento
ventilazione e l’aria diventa umida.
Ciò si veri ca quando la temperatura ambiente raggiunge la temperatura
impostata, la funzione passa alla modalità FAN e l’umidità aumenta.
L’unità esterna produce rumori durante le
operazioni di riscaldamento.
Ciò è dovuto ai cambiamenti nel usso di immissione del gas
refrigerante quando la funzione si arresta e si avvia.
La funzione non si arresta subito dopo
avere premuto il tasto OFF/ON.
Rilascio del calore in atto La funzione si arresterà automaticamente
dopo circa 60 secondi.
Il funzionamento si arresta occasionalmente.
(“DEFROST” (SBRINAMENTO) appare sul
display del telecomando.)
Questa unità si trova in modalità di sbrinamento e il ghiaccio sciolto è
spurgato dall’unità esterna.
Il usso dell’aria non si avvia immediatamente
dopo che la funzione è stata attivata. (“PRE
HEAT” (PRERISCALDAMENTO) appare sul
display del telecomando.)
L’unità è in fase di riscaldamento per poter fornire aria calda.
Il funzionamento parte dopo una mancanza
di tensione.
Il riavvio automatico è in funzione ed opera in base alle regolazioni
precedenti.
Durante la modalità aria asciutta, viene
fatta uscire dell’aria fredda.
L’unità esegue la funzione di raffreddamento ad una velocità del
ventilatore bassa, in modo da deumidi care la stanza.
A volte la velocità del ventilatore cambia
durante la modalità di riscaldamento.
La temperatura ambiente ha raggiunto quella impostata sul
telecomando. Quando la temperatura ambiente scende nuovamente, la
velocità del ventilatore si adeguerà alle impostazioni del telecomando.
Dall’unità esterna fuoriesce del vapore
durante la modalità di riscaldamento.
Ciò è dovuto al fatto che l’operazione di sbrinamento si veri ca sullo
scambiatore di calore.
Le condizioni seguenti indicano un guasto.
Le condizioni seguenti indicano un guasto.
SOLUZIONE DEI PROBLEMI SOLUZIONE DEI PROBLEMI
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic CU-B34DBE8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic CU-B34DBE8 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic CU-B34DBE8

Panasonic CU-B34DBE8 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info