453806
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
ENGLISH
Symptom Cause
Mist emerges from indoor unit.
Condensation effect due to cooling process.
Waterowingsoundduringoperations.
Refrigerant ow inside the unit.
The room has a peculiar odour.
This may due to damp smell emitted by the wall, carpet, furniture or clothing.
Indoor fan stops occasionally during
automatic fan speed setting.
This helps to remove the surrounding odours.
Operation is delayed a few minutes after
restart.
The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam.
Condensation or evaporation occurs on pipes.
The unit operates automatically when
power is resumed after a power failure.
It is the Auto Restart function of the unit. Operation will be restarted automatically under the
previous operation mode and airow direction when power is resumed as the operation is
not stopped by remote control .
To cancel the Auto Restart Control, please refer to page 6.
Power indicator blinks during operation
and the indoor fan is stopped.
The unit is in defrost mode, and the melted frost is drained from the outdoor unit.
Indoor fan stops occasionally during
heating operation.
To avoid unintended cooling effect.
TURN OFF POWER SUPPLY and CALL Authorized Distributor under the following conditions:
Abnormal noise during operation.
Water/foreign particles have entered the Remote Control.
Water leaks from Indoor unit.
Circuit breaker switches off frequently.
Power cord becomes unnaturally warm.
Switches or buttons are not functioning properly.
The timer indicator blinks and the unit can not be operated.
NON SERVICEABLE CRITERIAS
TROUBLESHOOTING
Activate heat mode for 2~3 hours to thoroughly dry the unit.
Turn off the power supply and unplug.
Remove the remote control batteries.
FOR EXTENDED NON-USE
Checking of remote control batteries.
No obstruction at air inlet and air outlet vents.
After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C
Heating: ≥ 14°C
SEASONAL INSPECTION AFTER EXTENDED
NON-USE
The following symptoms do not indicate malfunction.
Symptom Check
Heating/Cooling operation is not working
efciently.
Set the temperature correctly.
Close all doors and windows.
Clean or replace the air lters.
Clear any obstruction at the air inlet and air outlet vents.
Noisy during operation.
Check if the unit has been installed at an incline.
Close the front panel properly.
Remote control does not work.
Insert the batteries correctly.
Replace weak batteries.
The unit does not work.
Check if the circuit breaker is tripped.
Check if timers have been set.
Check the following before calling for servicing.
F566242_EN1.indd 7 2009-1-13 13:36:57
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic CS-UW12GKE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic CS-UW12GKE in the language / languages: English, Dutch, Italian, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info