Cassette Tape Player Basics
Tape Insert and Playback
Insert a cassette tape. Playback will start automatically.
Stop and Tape Eject
Press [u] to stop tape play and eject the cassette tape.
The unit will be automatically switched back to radio mode.
Notes on Cassette Tape
Tape Slack:
Use a pencil or similar object to take up the
slack as shown. If a loose tape is used, this
may result in the tape becoming tangled in
the rotating parts of the unit.
Notes:
¡To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).
¡If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a finger or the like, the cas-
sette may not be properly reproduced. In such a case, eject the cassette, make the tape tight, then insert it back into the
deck.
¡Always remove the cassette when you stop using the cassette player. This will prolong the life of your tape.
Note: You can not select CD Changer mode or Radio mode while tape playing.
If you want to select CD Changer mode or Radio mode, eject the tape.
Eject
Exposed end
(Open end)
Exposed end
(Open end)
Pencil
Do not touch or
pull out the tape.
Mode Selection
You can switch to the cassette player mode as shown below.
From:
