13
CQ-HX1083/HX1003N
12
E
N
G
L
I
S
H
12
CQ-HX1083/HX1003N
11
E
N
G
L
I
S
H
Notes:
¡
Press the
ARROW
area ( or ):
in steps of 0.05 MHz (FM)
in steps of 9 kHz (AM)
¡The stereo indicator lights during reception of an FM
stereo broadcast.
e Tuning
Hold down the
ARROW
area ( or ) for
0.5 seconds or more, then release it.
Higher frequencyLower frequency
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Preparation: Select a band. (a Previous page)
Manual Preset Memory
Manually saves a station in preset memory.
Hold down [BAND] (APM) for 2 seconds or more.
Notes:
¡All presettings for a selected band (FM1, in this case) will be updated.
¡Only RDS stations will be automatically picked up in the default setting for FM1 - 3.
For selecting non-RDS stations, deactivate the AF mode in advance. (a page 15)
¡The 6 best-receiving stations will be automatically saved
in memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for
5 seconds each.
To stop the scanning: press the
ARROW
area ( or
), or press one of the keys from to on the
remote control.
q Select a station (a Previous page)
w Preset memory mode
Hold down the
DIRECTION
area
( or ) until the pre-
set number blinks.
Press the
ARROW
area ( or
) to select a
preset number.
e Select a preset number
Hold down the
DIRECTION
area
() for 2 sec-
onds or more to mem-
orize the station.
r Preset a station
The display blinks once, and the
station is saved in the memory.
For the use of the remote control:
After step 2 above, hold down one of pre-
set keys from to , the station is
saved in the memory.
Radio - Basics Radio – Preset Memory
w Band
Press the SOURCE area to select the radio mode.
RADIO
CD Player
CD Changer
Auxiliary
q Sound Source Selection
Press [BAND] to select a band (FM1-3 or
AM(LW/MW)).
Preset Station Calling
q Enter the preset memory mode
(a see above)
Press the
ARROW
area (
or ) to select a preset num-
ber for tuning in to the preset sta-
tion.
For the use of the remote control:
Press one of the preset buttons
from to .
w Select a preset number
BAND
FM stereo indicator
SOURCE area
SOURCE area
DISPLAY area
Auto Preset Memory (APM)
Automatically saves stations with good reception in preset memory.
Display Change
Press the DISPLAY area to change display as
follows.
PS display
Frequency
Clock time
Functions of the ARROW
Areas
Press the DIRECTION area to switch
between the functions of the ARROW areas
as follows.
(Tune a see below)
(Preset a see next page)
FM1
FM2
FM3
AM (LW/MW)
Menu
(a page 17)
ARROW area
DIRECTION area
Preset number
