633079

Panasonic CQ-C1100U Manual

16
Zoom out
Zoom in
Previous page
1/17
Next page
(+)(–) (+)(–) (+)(–)(+)(–)
FRONT SP REAR SP
ACC
BATTERY 15A
1
3
2
S
•
W-OUT
19
E
N
G
L
I
S
H
20
E
N
G
L
I
S
H
3130
CQ-C1200U/C1120U/C1110U/C1100U CQ-C1200U/C1120U/C1110U/C1100U
Electrical Connections
Cautions:
• This product is designed to operate with a 12 V DC, negative ground battery system.
•To prevent damage to the unit, be sure to follow the connection diagram below.
• Strip about 5 mm of the lead ends for connection.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
External Power Amplifier
CY-M7052
(option)
RCA Cord (option)
RCA Cord (option)
Sub-Woofer
cord (monaoural)
CQ-C1200U/C1120U
CQ-C1110U/C1100U
Sub-Woofer
(option)
Ground lead
To a clean, bare metallic part of car chassis.
Battery lead
To the car battery, continuous +12 V DC
Power lead
To ACC power, +12 V DC
Note: This lead is used for power control
when an external power amplifier is con-
nected. The power supply of a power
amplifier will be activated when turning
on the power of this unit.
Amp. relay control power lead
(Max. 500 mA)
This lead is for connection to the power
amplifier.
Note: The power antenna extends automatically
when the FM/AM radio mode is selected.
Motor antenna relay control lead
(To motor antenna) (Max. 500 mA)
This lead is not intended for use with switch
actuated power antenna.
(Black) (Yellow)
Antenna
(R) Red
(L) White
y Power connector
Fuse (15 A)
C
(Red)
(Dark blue/white stripe)
(Dark blue)
y
Power
connector
Fuse
To remove
the Fuse
Only for CQ-C1200U
Only for CQ-C1200U/C1120U/C1110U
External Power Amplifier
CY-M9054
(option)
Speaker lead
System up
speakers
(White/
black
stripe)
Left speaker
(Front)
Right speaker
(Front)
Left speaker
(Rear)
Right speaker
(Rear)
(White) (Gray/black
stripe)
(Gray) (Green/black
stripe)
(Green) (Violet/
black
stripe)
(Violet)
C If the fuse (rear panel) blows fre-
quently, they may be something
wrong with the unit or wiring. Consult
your nearest Panasonic Servicenter
for service.
(L) White
(R) Red
Speaker connections
• Do not connect more than one speaker to one set of speaker leads (except for
connecting to a tweeter).
• Do not use a 3-wire type speaker system having a common earth lead.
L
R
L
R
Preamp. output connector (rear)
Preamp. output connector (front)
Note: A bridge connection should be
used when connecting only 2 channels
such as CQ-C1100U connection.
… 16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic CQ-C1100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic CQ-C1100U in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info