590563
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
Troubleshooting
Battery
The battery indicator lights
red.
The battery level is very low (the charge is approx. 9
%
or less).
Connect the AC adaptor. You can use the computer when the indicator light is orange.
If you do not have an AC adaptor, save your data and power off your computer. After
replacing the battery pack with a fully charged one, turn your computer on again.
The battery indicator is blink-
ing.
If blinking red:
Quickly save your data and power off your computer. Remove the battery pack and dis-
connect the AC adaptor, then connect them again. If the problem persists, contact your
technical support of ce. The battery pack or charging circuit may be defective.
If blinking orange:
The battery indicator blinks orange several times also when you slide the battery latch,
but this is not a malfunction.
Battery cannot be recharged temporarily because the internal temperature of the bat-
tery pack is outside the acceptable temperature range for recharging. Your computer
can be used normally in this state. Once the range requirement is satis ed, charging
begins automatically.
Software applications and peripheral devices (USB devices, etc.) are consuming too
much power. Exit the software applications currently running, and remove all peripher-
als. Once the range requirement is satis ed, charging begins automatically.
The battery indicator is ash-
ing.
The battery is recharging.
If [Battery Charging Indicator] in the [Main] menu of the Setup Utility is set to [Flashing],
the indicator will alternately become lighter and darker.
Touch Pad/Screen/Keyboard
The cursor does not work.
When using the external mouse, connect it correctly.
Restart the computer by using the keyboard.
Press and press
two times, and press
to select [Restart] and press
Enter
.
Press ,
U
, and
R
to select [Restart].
If the computer does not respond to keyboard commands, read “No response”
(
page 32).
Cannot input using the touch
pad.
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse’s operating
instructions.
Cannot point the correct
position using the pen (in-
cluded) or nger.
Perform the screen calibration (
page 18).
If external mouse driver is installed, you may not be possible to use the Touch Pad.
Uninstall external mouse driver.
<Only for model with digitizer>
Cannot point the correct position using your nger after resuming form sleep or hiberna-
tion while the display is rotated.
Proceed as follows.
A
Press the
(USER) button to open the Dashboard for CF-C1.
B
Use the digitizer pen to select [Pen Only] at [Screen Input].
C
Select [Touch + Pen] again at [Screen Input].
Proceeding as follows also solves this problem.
A
Click
(Start) and input “c:\util\resset\resset.exe” in [Search programs and les],
then press
Enter
.
B
Click [Yes] on the [User Account Control] screen.
C
Select [Disabled] and click [OK].
D
Click [Yes] when you are prompted to restart the computer.
If the cursor does not move correctly after calibration, reset the parameters and perform
the screen calibration again, using the following steps.
A
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B
Click [Reset].
C
If [User Account Control] is displayed, click [Yes].
D
Click [OK].
E
Click [Calibrate], then perform the screen calibration (
page 18, step 8-
C
).
CF-C1mk1(CPE02283YA)_OI_EN.indb 31CF-C1mk1(CPE02283YA)_OI_EN.indb 31 10/15/2010 11:21:02 AM10/15/2010 11:21:02 AM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic CF-C1 series Toughbook at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic CF-C1 series Toughbook in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info