99985
21
Zoom out
Zoom in
Previous page
1/30
Next page
21
The underlined values are factory preset setting values.
*1
“AUTO” is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the
input signal, we recommend assigning specific format.
g COMP.
The following menus are switched by selecting “RGB-COMP.” in “YP
BPR/RGB” in the “INPUT SELECT” menu.
The underlined values are factory preset setting values.
*1 “EXECUTING” is displayed while “AUTOSETUP” is being executed, and “COMPLETE” is displayed when
“AUTOSETUP” is completed.
If “AUTOSETUP” cannot be completed, “INCOMPLETE” is displayed.
*2 Each RGB-COMP. input compatible format can be adjusted.
INPUT SELECT
Sub menu Settings Explanation
VIDEO / Y/C
<AUTO>
<NTSC>
<PAL>
Used to select the input format for VIDEO and Y/C input.
*1
<AUTO> Either NTSC or PAL is automatically selected.
<NTSC> NTSC <PAL> PAL
NTSC SETUP
<75>
<00>
Selects the NTSC setup level.
<75> Select this when using with a setup signal of
7.5 IRE. (The inner parts of the monitor are set
to the 7.5 IRE setup level to suit the black level)
<00> Select this when there is no setup level signal.
YP
BPR/RGB
<YP
BPR>
<RGB-VIDEO>
<RGB-COMP.>
Selects either YP
BPR (Component) or RGB input mode.
<YP
BPR> Selects the YPBPR signal.
<RGB-VIDEO>
Selects the video RGB signal.
<RGB-COMP.>
Selects the PC RGB signal.
COMPONENT
LEVEL
<SMPTE>
<B75>
<B00>
Selects YP
BPR (Component) signal input level.
<SMPTE> When the signal level specified in SMPTE is
Chroma 100 IRE P
B, PR = 0.7 Vp-p.
<B75> Select this when connecting a betacam or
simliar devices set to 7.5 IRE. (The inner parts
of the monitor are set at 7.5
IRE
setup level to
suit the black level)
<B00> Select this when connecting a betacam or similar
devices that are not setup to the IRE level.
RGB SYNC
<G-ON>
<EXT>
Selects the SYNC when using RGB-VIDEO input.
<G-ON> Select when a synchronizing signal is
superimposed on the G signal.
<EXT> Select when an external synchronizing signal is
received in synchronization.
COMP.
Performs analog PC settings. (Refer to “COMP.” below)
Sub menu Settings Explanation
AUTOSETUP *1 Screen automatic adjustment is performed when “RGB-
COMP. is selected in “YP
BPR/RGB” in the “INPUT SELECT”
menu. “AUTOSETUP” is performed if a different screen is
displayed, and “YES” is selected.
H POSITION
<0–60>
(Factory preset settings: 30)
Used to adjust the picture display position in the horizontal
direction.
*2
V POSITION
<0–60>
(Factory preset settings: 30)
Used to adjust the picture display position in the vertical
direction.
*2
PHASE
<0–31>
(Factory preset settings:
J page 22)
Used to adjust the clock phase with 1/32 clock phases.
*2
CLOCK
<700–1800>
(Factory preset settings:
J page 22)
Used to adjust the sampling clock in dot units.
*2
WXGA/XGA
<XGA>
<WXGA>
Switches between WXGA and XGA.
Main Menu (continued)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic BT-LH1700W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic BT-LH1700W in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info