597960
110
Zoom out
Zoom in
Previous page
1/116
Next page
110
8-6-6 TC/UB
8-6-7 UMID SET/INFO
<Note>
Please refer to [4-5-6 Setting the UMID Information] for the
UMID information setting.
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE DF
NDF
Set the time code mode.
DF: Drop frame.
NDF: Non drop frame.
–CUF
UB MODE USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:Select UB value set in the LCD
section.
TIME: Select local time (hours, minutes,
seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
EXT: Slaved to UB from TC-IN. If reading
fails, USER value is retained.
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN
:Read out value stored in the card
and record value continuously.
–CUF
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME: Select local time (hours, minutes,
seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN
:Read out value stored in card and
record value continuously.
–CUF
TCG SET HOLD ON
OFF
ON/OFF switching for the feature that
always starts recording (when the power is
turned ON again) the TCG value that was
set before the power is turned OFF.
–CUF
FIRST REC TC REGEN
PRESET
For the first recording after the power is
turned on, a P2 card is inserted and then
switching from this P2 card to another
recording-target P2 card is performed,
select whether or not to regenerate the time
code as the value on the new P2 card.
REGEN:
For clips recorded on the recording-
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.
PRESET:
Use the camera-recorder’s internal
time code.
<Note>
Set the date and time accurately. For
guidance on setting, see [4-5-2 Setting the
Internal Clock’s Date and Time].
–CUF
P. O F F L C D
DISPLAY
ON
OFF
Select whether or not to display the time
code setting and counter indication on the
LCD monitor when the power is turned OFF.
ON: Display setting and indication while
the power is turned OFF.
OFF: Power-down LCD monitor while
camera power is turned OFF. Setting
and indication disabled.
–CUF
Items/
Data Saved
Adjustable
Range
Remarks
TC OUT TCG
TCG/TCR
Select the time code to be output to the time
code output connector.
TCG: Always output time code generator
value.
TCG/TCR:
Display time code generator value in
E-E mode, and time code reader
value in V-V mode.
–CUF
TC DISP SEL 30F
24F
Select the display format for the time code
frame digits.
30F: Display time code frame digits in 30
frames.
24F: Convert time code frame digits into
24 frames for display.
–CUF
Items/
Data Saved
Adjustable
Range
Remarks
COUNTRY NO-INFO
Input the user’s country. NO-INFO is
displayed until the input completes.
–CUF
ORGANIZATION
NO-INFO
Input the user’s organisation or company
name. NO-INFO is displayed until the input
completes.
–CUF
USER NO-INFO
Input the user name. NO-INFO is displayed
until the input completes.
–CUF
DEVICE NODE
Indicate the product ID number.
–––––
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SPX 800P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SPX 800P in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info