597960
92
Zoom out
Zoom in
Previous page
1/116
Next page
92
8-2-3 REC FUNCTION 8-2-4 OUTPUT SEL
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
PRE REC TIME 0SEC
:
15SEC
Set PRE RECORDING.
0-15SEC:
Set the length of time that can be
retrospectively recorded before the
REC START button is pressed.
<Note>
The maximum selectable range is 8 seconds
when the REC MODE in the <SYSTEM
MODE> screen is set to 50M (DVCPRO50).
–CUF
LOOP REC
MODE
ON
OFF
Select whether or not to enable LOOP REC.
This setting can be used with PRE
RECORDING features.
ON: Enable LOOP REC.
OFF: Disable LOOP REC.
<Note>
After the power is turned off, this item will
default to OFF the next time the power is
turned on.
–––F–
VOICE MEMO
RESERV
ON
OFF
Set the available memory space for voice
memos in P2 cards.
ON: Reserve a voice memo area of 10
minutes or longer separately from the
video recording capacity. The voice
memo area can be used even when
FULL is displayed for the recording
capacity of the P2 card.
OFF: Do not reserve any voice memo
space.
<Note>
Even when this item is set to OFF, and FULL
is displayed for the P2 card’s recording
capacity, it may be possible to record voice
memos depending on the status of the P2
card.
–CUF
REC START ALL
NORMAL
Select operating modes that allow recording
to start.
ALL: Allow recording to start during stop,
recording pause, and playback.
NORMAL:
Allow recording to start during stop
and recording pause.
–CUF
Items/
Data Saved
Adjustable
Range
Remarks
VIDEO OUT
SEL
VBS
VF
Y
SDI
Select the output signal on the VIDEO OUT
terminal.
VBS: Output a regular composite signal.
VF: Output a VF Y signal. The status
display is also superimposed.
Y: Output a component Y signal.
SDI: Output an SDI signal. Only
selectable when the optional AJ-
YA902AG extension board is
attached.
–CUF
OUTPUT CHAR TC
STATUS
MENU
ONLY
Set the character contents superimposed
onto the output signals for the VIDEO OUT
terminal (Analog or SDI) and MON OUT
terminal.
TC: Display the time code. (Displays the
menu when menu characters are
superimposed.)
<Note>
The TC display position moves up and down
depending on the camera ID position.
STATUS:
Display the same characters
superimposed on the VF signal.
(Displays the menu when menu
characters are superimposed.)
MENU ONLY:
Displays only when the menu
characters are superimposed. No
display appears when other
characters are superimposed.
–CUF
MONITOR OUT
CHAR
ON
OFF
Select whether or not to superimpose
characters on the MON OUT terminal signal
independently of the camera’s VIDEO OUT
CHARACTER switch. (The character
content is the same as the video output
signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
–CUF
LCD MON
CHAR
ON
OFF
Select whether or not to superimpose
characters on the LCD monitor. (The
character content is the same as the video
output signal.)
ON: Enable superimpose.
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
OFF: Disable superimpose.
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
–CUF
VF MODE EE/PB
EE
Select the image to display in the viewfinder.
EE/PB
: Display the playback image in the
playback mode.
EE: Always display the camera image.
–CUF
THUMBNAIL
OUT
ON
OFF
Select whether or not to output clip
thumbnails displayed on the LCD monitor to
the video output and monitor output signals.
ON: Enable output.
OFF: Disable output.
–CUF
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SPX 800P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SPX 800P in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info