597960
83
Zoom out
Zoom in
Previous page
1/116
Next page
83
6
Clip Meta Data
Displays more detailed data about the clip. Use the cursor
buttons to move the pointer, and press the SET button to
check the detailed content. The underlined items are
automatically set during shooting. Other items can be input
on your personal computer, etc.
GLOBAL CLIP ID
:
Displays the global clip ID indicating the shooting
conditions of the clip.
VIDEO: Displays [FRAME RATE]
(clip frame rate), [PULL
DOWN] (pulldown method), and [ASPECT RATIO]
(aspect ratio).
AUDIO: Displays [SAMPLING RATE]
(sampling frequency
of recorded voice) and [BITS PER SAMPLE]
(quantifying bit number of recorded voice).
USER CLIP NAME:
Displays the user-set clip name. The initial value
is the global clip ID.
ACCESS: Displays [CREATOR] (name of the person who
recorded the clip), [CREATION DATE]
(date and
time the clip was recorded), and [LAST UPDATE
PERSON] (the last person who updated the clip).
DEVICE: Displays [MANUFACTURER]
(name of the
manufacturer of the recording equipment),
[SERIAL NO.]
(serial number of the recording
equipment), and [MODEL NAME]
(model name of
the recording equipment).
SHOOT: Displays [SHOOTER] (name of the shooter),
[START DATE]
(shooting start date and time),
[END DATE]
(shooting end date and time), and
[LOCATION] ALTITUDE/LONGITUDE/LATITUDE/
SOURCE/PLACE NAME (shooting location’s
latitude/longitude/altitude/source of the
information/name).
SCENARIO:
Displays [PROGRAM NAME] (program name),
[SCENE NO.] (scene number), and [TAKE NO.]
(take number).
NEWS: Displays [REPORTER] (reporter name),
[PURPOSE] (purpose of coverage), and
[OBJECT] (coverage target).
MEMO: Displays [PERSON] (person who records the text
memo added to the clip) and [TEXT] (content of
the text memo). Two or more text memos can be
recorded for a single clip, but this camera-recorder
can only recognise the first text memo.
<Note>
This camera-recorder can only display printable ASCII
characters.
6-13-2 P2 Card Status Display
From the menu bar, select PROPERTY CARD STATUS. The
following screen appears.
Write-protect Mark
The mark appears if the P2 card is write-protected.
P2 Card Status
The remaining memory capacity of the P2 card is indicated
by a bar graph and percentage.
The following indications may appear, depending on the
card status:
FORMAT ERROR:
An unformatted P2 card is inserted.
NOT SUPPORTED:
An unsupported card is inserted in the camera.
NO CARD:
P2 cards are not inserted.
P2 Card Remaining Capacity/Total Capacity
Displays the P2 card remaining capacity and total capacity
in minutes. The total of the remaining memory capacity for
each P2 card that is displayed may not match the actual
total remaining memory capacity for the P2 cards because
only the figure in minute is displayed.
Slots Total
Displays the total capacity of the 5 slots.
Please note that the remaining capacity of a write-protected
P2 card is not included in the total remaining capacity.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SPX 800P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SPX 800P in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info