597960
17
Zoom out
Zoom in
Previous page
1/116
Next page
17
2
2-6 Time Code Section
GENLOCK IN connector (BNC)
This connector is used to input a reference signal before the
camera unit is gen-locked, or before the time code is
externally locked.
TC IN connector (BNC)
This connector is used to input a reference time code when
you externally lock the time code.
TC OUT connector (BNC)
When you inter-lock the time code of the AJ-SPX800P with
that of an external device this must be connected with the
time code input (TC IN) connector of the external device.
HOLD button
Pressing this button freezes the time data indication on the
counter. Note that time code generation continues. Pressing
the button again reactivates the counter.
This function is used to ascertain the time code of a
particular recorded scene.
RESET button
This button resets the time data on the counter to
“00:00:00:00”.
If this button is pressed when with the TCG switch
positioned at [SET], CTL* data, time code data, user bit
data, and real-time data are reset to 0. Real-time data is
also reset to the defaults.
DISPLAY (counter display selector) switch
Indications of the time code, CTL* and user bits on the
counter of the display window depend on the positions of
this switch and the TCG switch.
Pressing the HOLD button also displays Date/Time/Time
Zone.
UB: User bits indicated.
TC: Time code indicated.
CTL*: CTL indicated.
* CTL will be supported in the near future.
TCG (time code selector) switch
This switch is used to specify the stepping mode for the
built-in time code generator.
F-RUN: Select this position to continuously advance the
time code independently of the P2 card recording
status.
Use this mode to synchronise the time code with
the time of day, or to externally lock the time code.
SET: Select this position to set the time code and/or
user bits.
R-RUN: Select this position to advance the time code only
during recording.
For spliced scenes recorded on P2 cards, the
sequence of time codes is unbroken.
CURSOR and SET buttons
Use these buttons to set the time code and user bits.
The four triangular buttons are the CURSOR buttons, and
the center rectangular one is the SET button.
For guidance in setting the time code and user’s bit, see [4-5
Setting Time Data].
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SPX 800P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SPX 800P in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info