597959
39
Zoom out
Zoom in
Previous page
1/124
Next page
39
4
Chapter 4 Adjustments and Settings for Recording (continued)
4-5-3 Setting the Time Code
1 Position the DISPLAY switch at [TC].
2 Position the TCG switch at [SET].
3 Set the menu option TC MODE to “DF” or “NDF”. “DF
steps the time code in drop frame mode, and “NDF”
steps it in non-drop frame mode.
The menu option TC MODE can be found in the <TC/
UB> screen, which is accessible from the MAIN
OPERATION page.
4 Use the CURSOR buttons to set the time code.
The time code setting range extends from 00:00:00:00
to 23:59:59:29.
button: Shifts the target (blinking) digit to the right.
button: Shifts the target (blinking) digit to the left.
button: Advances the blinking number by one digit.

button: Winds back the blinking number by one digit.
5 Change the position of the TCG switch.
[F-RUN] steps the time code in free run mode, and [R-
RUN] set it in recording run mode.
<Note>
When the TCG switch is positioned at [SET],
thumbnails cannot be manipulated.
Regeneration of Time Code
When the menu option FIRST REC TC is set to “REGEN”,
the AJ-SPC700P reads the time code recorded in the last
frame on the last recorded clip (with the most recent
recording date and time) to maintain and record that value.
The menu option FIRST REC TC can be found on the <TC/
UB> screen, which is accessible from the MAIN
OPERATION page.
<Note>
However, when a P2 card is inserted or removed or when
the recording target P2 card is changed using the SLOT SEL
function of the USER button, the time code is continuously
recorded on the clip most recently recorded on the target P2
card. When there is no recorded clip, the time code is
recorded on the new recording target P2 card, from the
value generated by the TC generator built into the camera-
recorder.
Time code function during battery replacement
Even during battery replacement the backup mechanism
keeps the time code generator functioning for a considerable
time (about one year).
<Note>
When the POWER switch has been switched ON OFF
ON, the backup accuracy of the time code in free run mode
is about ±2 frames.
4-5-4 Externally Locking the Time Code
The time code generator built into your AJ-SPC700P may be
locked with an external generator. It is also possible to lock
an external time code generator with the internal generator.
Connections for externally locking the time code
(examples)
As illustrated, both the reference video signals and the time
code must be input.
Example 1 Locking the time code with external signals
Example 2 Connecting two or more AJ-SPC700Ps with
one another, with one being used as the
reference device.
GENLOCK IN
TC IN
Reference
video signal
Reference
time code
GENLOCK IN
TC IN
TC OUT
CAM OUT
GENLOCK IN
TC IN
TC OUT
CAM OUT
TC OUT
CAM OUT
Different camera
Reference device
#,52%2'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SPC 700P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SPC 700P in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info