597958

Panasonic AJ-SDC 905P Manual

80
Zoom out
Zoom in
Previous page
1/108
Next page
Chapter 7 Menu description tables
80
REC TALLY RED
GREEN
CHAR
For selecting the method used to inform the
user that the unit is recording when a system
using an extender or other device is
configured and BOTH is selected as the 26-
PIN CONTROL menu item setting while the
system is used in the remote control mode.
RED: The red tally lamp lights.
GREEN: The green tally lamp lights.
CHAR: The letters “REC” appear on the
viewfinder.
Item/
Data storage
Variable
range
Remarks
Item/
Data storage
Variable
range
Remarks
PB MODE
SDC905
MANUAL
AUTO
For selecting the playback mode.
MANUAL
: The playback mode accords with the
25M or 50M setting of the REC
MODE item.
Operation proceeds with 16:9 or 4:3
read from the tape.
AUTO: In this mode, the recording mode is
automatically detected and playback
is performed in the same mode.
7-2 SYSTEM SETTING
7-2-1 SYSTEM MODE
The underlining in the variable range column indicates the setting in the preset mode.
REC SIGNAL CAM
VIDEO
1394
For selecting the video input signals.
CAM: The signals from the camera are
recorded.
VIDEO: The signals from the GENLOCK IN
connector are recorded.
1394: The signals from the DVCPRO
connector are recorded.
<Note>
CAM is always set when the power is next
turned on after it being turned off.
CUFE
CUFE
CUFE
REC MODE
SDC905
16:9/50M
4:3/50M
16:9/25M
4:3/25M
For selecting the mode in which to record the
signals on the VTR.
16:9/50M: <16:9> signals are recorded at 50
Mbps.
4:3/50M: <4:3> signals are recorded at 50
Mbps.
16:9/25M: <16:9> signals are recorded at 25
Mbps.
4:3/25M: <4:3> signals are recorded at 25
Mbps.
SET UP 50
SDC905
O%
7.5%A
For selecting the setup. (For 50M recording).
0%: The setup is set to 0% for both the
camera output signals and the signals
on the tape.
7.5%A: The setup is set to 7.5% for the
camera output signals and 0% for the
signals on the tape.
SET UP
SET UP 25
SDC905
SDC615
O%
7.5%
7.5%A
For selecting the setup. (For 25M recording).
0%: The setup is set to 0% for both the
camera output signals and the signals
on the tape.
7.5%: The setup is set to 7.5% for both the
camera output signals and the signals
on the tape.
7.5%A: The setup is set to 7.5% for the
camera output signals and 0% for the
signals on the tape.
CUFE
ASPECT
SDC615
16:9
4:3
For selecting the mode in which to record the
signals on the VTR.
16:9: <16:9> signals are recorded.
4:3: <4:3> signals are recorded.
CUFE
CUFE
CUFE
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SDC 905P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SDC 905P in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info