597957
81
Zoom out
Zoom in
Previous page
1/108
Next page
7
Chapter 7 Menu description tables
81
Item/
Data storage
Variable
range
Remarks
P.OFF GPS DATA HOLD
CLEAR
For selecting whether or not to hold the UMID
GPS position information while the power is
off and record the information as the data still
held as the previous value until another
measurement can be taken after the power is
next turned on.
HOLD: The data is held and recorded.
CLEAR: The data is cleared at the same time
as the power is turned off, and all
zeros (no information) are recorded
from the time the power is turned on
until the measurement is next taken.
COMPONENT OUT OFF
BETACAM
M2
For setting the analog component signal
output level.
OFF:
Output stops during power save. (Note that
this setting is forced ON if a camera
adapter is connected and a tally signal is
detected from pin 26. Otherwise it is OFF.)
BETACAM:
Output at the ß-CAM level.
M2:
Output at the M II level.
7-2-2 OPTION MODE
The underlining in the variable range column indicates the setting in the preset
mode.
CUF
CUF
1394 TYPE DVCPRO
DV
For setting the format of the signals to be
output from the DVCPRO connector.
DVCPRO:
The signals are output in the DVCPRO
(25M) format.
DV:
The signals are output in the DV format.
<Note>
The signals are output in the DVCPRO50
format if 16:9/50M or 4:3/50M is selected as
the REC MODE menu item setting on the
<SYSTEM MODE> screen.
SDC905
CUF
1394 AUDIO IN CH1/CH2
CH3/CH4
For selecting the channel on which the
reception data is to be recorded on the tape
when receiving DV format data in the 4CH
audio signal mode and recording the data on
a DVCPRO (25M) tape.
CH1/CH2:
The reception data is recorded on CH1 and
CH2.
CH3/CH4:
The reception data is recorded on CH3 and
CH4.
CUF
1394 SPEED S100
S200
S400
For setting the transfer speed of the signals to
be output from the DVCPRO connector.
S100: 100 Mbps
S200: 200 Mbps
S400: 400 Mbps
CUF
Item/
Data storage
Variable
range
Remarks
1394 IN CH 0
:
63
AUTO
For setting the input channel for the signals to
be supplied to the DVCPRO connector.
0-63:
The channel is fixed at the specified
number.
AUTO:
The channel corresponding to the setting of
the externally connected unit is selected.
CUF
1394 OUT CH 0
:
63
AUTO
For setting the output channel for the signals
to be output from the DVCPRO connector
0-63:
The channel is fixed at the specified
number.
AUTO:
The channel corresponding to the setting of
the externally connected unit is selected.
CUF
26PIN VIDEO
SELECT
COMPONENT
VIDEO OUT
For setting the video signals to be output from
pin #4 of the 26-pin connector when a 26-pin
camera adapter is connected.
COMPONENT:
The component Y signal is output.
VIDEO OUT:
The same signal (composite signal) as the
VIDEO OUT connector signal is output.
CUF
26PIN CTL
DEFAULT
NORMAL
SPECIAL
For setting the control signal of the VTR to be
output from pin #12 of the 26-pin connector
when using a VTR connected to a 26-pin
camera adapter.
NORMAL:
STOP low, START high (for AJ-D92)
SPECIAL:
STOP high, START low
CUF
26PIN CONTROL OFF
BOTH
For setting whether recording is to be
controlled by the unit or by both the unit and
the external VTR which is connected to the
26-pin camera adapter.
OFF:
Recording is performed by the unit only. (It
is not performed using the external VTR.)
BOTH:
Recording is performed by both the unit
and the external VTR. The tally lamp
indicates the status of the tally signal of the
26-pin connector. (The tally lamp setting
can be established using REC TALLY in
the SYSTEM MODE.)
CUF
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-SDC 615P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-SDC 615P in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info