Chapter 4
Adjustments and settings for recording
56
4-9-5 How to return the menus settings to
the user standard settings
The setting statuses of the unit’s menus can be returned to
the user standard settings registered in 4-9-3. There are two
ways to do this: one method is to read (load) the USER DATA
as described in “4-9-3 How to use the user data” and the
other enables the return without performing any menu
operations.
Operation method without performing FILE menu
operations
4-9-6 How to return the menus settings to
the factory standard settings
The unit’s menu setting statuses can be returned to the
factory standard settings. To do this, first perform a menu
operation to open the <INITIALIZE> screen from the FILE
page.
1
Set the POWER switch to the OFF position.
2
Set the WHITE BAL switch to the PRST position.
3
Set the POWER switch to the ON position while holding
down the AUTO W/B BAL switch.
The USER menu item settings are all returned together to
the standard user data.
< INITIALIZE >
#
READ FACTORY DATA
WRITE USER DATA
RESET LENS FILES
WHITE BAL
switch
4-9-7 How to use the lens file data
This unit comes with a white shading compensation function
for the lens. This function enables up to six white shading
compensation settings of the lens to be stored as the lens file
data. Using this lens file data, the appropriate white shading
adjustment can be accomplished speedily even after the lens
is changed.
For details on data storing, reading and other operations, refer
to “5-3 Attaching the lens and performing the flange back and
white shading adjustments.”
How to return the menu settings (except for the lens file
data) to the factory standard settings
1 Select the READ FACTORY DATA menu item on the
<INITIALIZE> screen, and press the jog dial button.
2 Turn the jog dial button, and move the arrow (cursor) to
YES on the READ? screen.
3 Press the jog dial button. The menu settings are now
returned to the factory standard settings.
How to return the lens file data to the factory standard
settings
1 Select the RESET LENS FILES menu item on the
<INITIALIZE> screen, and press the jog dial button.
2 Turn the jog dial button, and move the arrow (cursor) to
YES on the RESET ALL LENS DATA? screen.
3 Press the jog dial button. The lens file data is returned to
the factory standard settings.
