597948
21
Zoom out
Zoom in
Previous page
1/212
Next page
21
Parts and their Functions: Shooting and Recording/Playback Functions Section
Parts and their Functions
13. TEXT MEMO button
Records a text memo if pressed during recording or
playback or when playback is paused.
Also, with appropriate menu settings, the TEXT MEMO
button can be used as a USER 4 button. For more
information on user buttons, refer to [Assigning
Functions to User Buttons] (page 59)
14. SAVE ON/OFF switch
Used to select the power supply method for each output
section.
ON: The output selected through the menu option
SAVE SW is power-saved. This option can be
found on the <OPTION MODE> screen on the
SYSTEM SETTING page.
OFF: Power saving is canceled.
Note
The ON/OFF switch does not function during recording.
The ON/OFF status changes after recording is
completed.
15. HD SDI A · B (output signal selector) switch
Changes the mode of the signals output through the HD
SDI A · B connector.
MEM: Video from the camera is output during
recording and when recording is paused.
Playback signals are output from the P2 card
during playback.
CAM: Video from the camera is output constantly.
OFF: Video is not output, and the unit operates in
power-saving mode.
Note that the audio output is synchronized with the
video.
For types of video outputs, refer to [Settings of signals
output from HD SDI A · B connector] (page 89) and
[Settings of signals output from MON OUT connector]
(page 90).
16. MON OUT CHARACTER switch
This switch controls the superimposition of characters
onto the video output from the MON OUT connector.
ON: Characters are superimposed.
OFF: Characters are not superimposed.
For types of characters, see [Settings of signals output
from MON OUT connector] (page 90).
17. HD SDI A connector
This connector is for outputting video. A video signal
based on the setting of the 15. HD SDI A · B switch is
output. LinK A signal is output while in Dual Link output.
Note
Camera image is output from the HD SDI A connector
even during playback while in Dual Link (RGB 4:4:4)
output.
18. MON OUT (monitor output) connector
The MON OUT connector is used for outputting video
for the monitor. The output signal can be switched
between a down-converted (analog composite) signal
and an HD SDI signal. This connector outputs video
based on the setting of the 19. MON OUT SEL (output
signal selection) switch. Through an internal menu
option, the characters can be superimposed
independently of the HD SDI A · B connector. For more
information, refer to [Settings of signals output from
MON OUT connector] (page 90).
31
32
33
15
19
21
20
17
30
24
27
25
28
18
29
26
22
23
14
16
1
2
3
11
10
9
8
12
13
4
5
6
7
AJ-HPX3700G-VQT1V68_eng.book 21 ページ 2008年10月15日 水曜日 午後6時38分
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HPX 3700G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HPX 3700G in the language / languages: English as an attachment in your email.

The manual is 25,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info