597945
185
Zoom out
Zoom in
Previous page
1/198
Next page
185
Menu : Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the
preset mode.
MIC/AUDIO2
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for the
front microphone.
–CUF
REAR MIC
POWER
ON
OFF
Select the phantom power supply for the
rear microphone.
When OFF is selected, no phantom
power is supplied even if the REAR
AUDIO CH1 or CH2 switch is set to +48.
–CUF
MONITOR
SELECT
STEREO
MIX
When the MONITOR switch is set to ST
(stereo), select the signal format for the
monitor output.
–CUF
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
–CUF
REAR MIC
CH1 LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF
REAR MIC
CH2 LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF
REAR LINE IN
LVL
+4dB
0dB
–3dB
Select the rear line input level.
–CUF
AUDIO OUT
LVL
+4dB
0dB
–3dB
Select the audio output level.
–CUF
HEADROOM 18dB
20dB
Set the headroom (standard level).
–CUF
WIRELESS
WARN
ON
OFF
Select whether or not to enable the
alarm to trigger for poor wireless
receiver reception.
–CUF
TC/UB
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE
DF
NDF
Set the time code mode.
DF: Drop frame.
NDF:Non drop frame.
Note
When the camera-recorder operates at
50 Hz or in 24P or 24PA mode, the non-
drop frame is always used.
–CUF
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER: Select UB value set in the LCD
section.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
EXT: When "CAM" , "VIDEO", or
"SDI" is selected in REC
SIGNAL on the SYSTEM MODE
screen, the user bits input to the
TC IN connector are recorded.
When "1394" is selected, the
user bits of signals input to the
DVCPRO connector are
recorded.
If reading fails, USER value is
retained.
TCG: TCG value enters UB.
FRM RATE:
Select the shooting information (e.g.
frame rate) for the camera. For more
information, see [Frame rate
information recorded in user bits]
(page 58).
When clips recorded in Native mode
are played back, the frame rate
information recorded in users bits in
the VAUX range is output.
REGEN
: Read out value stored in the
card and record value
continuously.
–CUF
VITC UB
MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
TCG: TCG value enters UB.
FRM RATE:
Select camera shoting information
(frame rate, etc.). For more
information, see [Frame rate
information recorded in user bits]
(page 58).
REGEN
: Read out value stored in card
and record value continuously.
Note
When the camera-recorder operates in
24P, 24PA, 30P (AVC-I) or 25P (AVC-I)
mode, FRM RATE is always selected.
–CUF
AJ-HPX3000G(VQT1D27)E.book 185 ページ 2007年9月3日 月曜日 午後2時34分
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HPX 3000G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HPX 3000G in the language / languages: English as an attachment in your email.

The manual is 17,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info