597944
168
Zoom out
Zoom in
Previous page
1/206
Next page
168
Menu: Menu Description Tables
OUTPUT SEL
Items/
Data Saved
Adjustable
Range
Remarks
OUTPUT ITEM MENU ONLY
TC
STATUS
Set the character contents
superimposed onto the output signals for
the HD SDI A · B connector and MON
OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed.
No display appears when other
characters are superimposed.
TC: Display the time code. (Displays
the menu when menu characters
are superimposed.)
Note that when “1080-23.98PsF
or “1080-24PsF” has been
selected in the SYSTEM MODE
menu option, the frame digits will
not be updated correctly.
STATUS:
Display the same characters
superimposed on the viewfinder
signal. (Displays the menu when
menu characters are
superimposed.)
–CUF
HD SDI A · B
CHAR
ON
OFF
Select whether to superimpose
characters on the HD SDI A · B
connector. (The character content output
from the HD SDI A · B and MON OUT
connectors is the same.)
ON: The characters are
superimposed.
OFF: The characters are not
superimposed.
–CUF
MONITOR OUT VBS
HD SDI
Select the output signal on the MON
OUT connector.
–CUF
MONITOR
GAMMA
ON
OFF
This sets whether to perform telecine
conversion correction on the MON OUT,
RC OUT, and LCD OUT signals when
GAMMA MODE SEL is set to “FILM-
REC”.
ON: Correction is performed.
OFF: Correction is not performed.
–CUF
Items/
Data Saved
Adjustable
Range
Remarks
VFR/LCD CHAR VF-OFF
LCD-OFF
ON
This sets whether to superimpose
characters on the video shown on the
LCD monitor and in the viewfinder.
Note, however, that the characters are
output to one of the MON OUT, VF OUT
and LCD OUT signals.
–CUF
VF MODE MEM
CAM
Select the image to display in the
viewfinder.
MEM: Display the playback image in
the playback mode. Display the
camera image at other times.
CAM: Always display the camera
image.
–CUF
VF SEL MONO
COLOR
Select the video signal that is output to
the viewfinder connector.
MONO:Output the Y signal alone to the
viewfinder connector.
COLOR:
Output the Y, PB, and PR signals
to the viewfinder connector.
–CUF
THUMBNAIL
OUT
ON
OFF
Select whether or not to output clip
thumbnails displayed on the LCD
monitor to the MON OUT (VBS) signal
and the REMOTE connector.
ON: Enable output.
OFF: Disable output.
Note
Even when the MON OUT OUTPUT SEL
switch is in the [CAM] position,
thumbnails are output when this option is
set to “ON”.
–CUF
DOWNCON
MODE
LT-BOX
SQUEEZE
For setting the mode of the down
converter output signals.
–CUF
AJ-HPX2700G-VQT1V27_eng.book 168 ページ 2008年9月2日 火曜日 午後5時43分
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HPX 2700G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HPX 2700G in the language / languages: English as an attachment in your email.

The manual is 24,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info