597944
157
Zoom out
Zoom in
Previous page
1/206
Next page
157
Maintenance and Inspections: Warning System
Maintenance and Inspections
11. P2 Card Error
Display window
indication
If the error occurs during recording,
“00:00:00:11” appears in the time code
display field. The indication continues to
flash after recording is stopped and until
the next operation is performed. There is
no indication if the error occurs during
playback.
WARNING lamp
If the error occurs during recording, the
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
Tally lamp
If the error occurs during recording, the
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
Viewfinder
A flashing “CARD ERR ” appears. In
the actual indication the is replaced by
the slot number of the P2 card that
triggered the error.
Warning tone
If the error occurs during recording, the
tone sounds 4 times per second for a
period of about 3 seconds after recording
stops. The tone does not sound if the
error occurs during playback.
Warning description
An error has occurred while recording
data to or playing data from a P2 card.
Recording/playback
operation
Stop recording or playback.
Countermeasures Replace the affected P2 card.
12. FAN STOP
Display window
indication
No display.
WARNING lamp Blinks 4 times per second.
Tally lamp No display.
Viewfinder
The “FAN STOP” indicator blinks while
recording continues.
Warning tone It does not sound.
Warning description
The fan is at rest because something is
wrong with it.
Recording/playback
operation
The unit continues to operate. However,
when the unit operates with the fan
stopped, then the temperature inside
rises. While the unit continues to operate,
clips may not be recorded or played back
properly.
Countermeasures
Immediately stop using the unit and
consult your distributor.
13. PROXY CARD ERROR
Display window
indication
No display.
WARNING lamp
Flashes 4 times per second for a period
of about 3 seconds.
Tally lamp
Flashes 4 times per second for a period
of about 5 seconds.
Viewfinder
The “PROXY CARD ERROR” indicator
light up.
Warning tone It does not sound.
Warning description
Proxy recording stops because of failure
on either the video encoder card or the
stream.
Recording/playback
operation
The unit continues to operate.
Countermeasures
Check the video encoder card or avoid
use of proxy recording.
AJ-HPX2700G-VQT1V27_eng.book 157 ページ 2008年9月2日 火曜日 午後5時43分
157


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HPX 2700G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HPX 2700G in the language / languages: English as an attachment in your email.

The manual is 24,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info