597943
182
Zoom out
Zoom in
Previous page
1/194
Next page
182
Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
MIC/AUDIO2
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for the
front microphone.
–CUF–
REAR MIC
POWER
ON
OFF
Select the phantom power supply for the
rear microphone.
When OFF is selected, no phantom
power is supplied even if the REAR
AUDIO CH1 or CH2 switch is set to +48.
–CUF–
MONITOR
SELECT
STEREO
MIX
When the MONITOR switch is set to ST
(stereo), select the signal format for the
monitor output.
–CUF–
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
–CUF–
REAR MIC
CH1 LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF–
REAR MIC
CH2 LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF–
REAR LINE IN
LVL
0dB
+4dB
–3dB
Select the rear line input level.
–CUF–
AUDIO OUT
LVL
0dB
+4dB
–3dB
Select the audio output level.
–CUF–
HEADROOM 18dB
20dB
Set the headroom (standard level).
–CUF–
WIRELESS
WARN
ON
OFF
Select whether or not to enable the
alarm to trigger for poor wireless
receiver reception.
–CUF–
TC/UB
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE
DF
NDF
Set the time code mode.
DF: Drop frame.
NDF:Non drop frame.
Note
When the camera-recorder operates at
50 Hz or in 24P or 24PA mode, the non-
drop frame is always used.
–CUF–
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER: Select UB value set in the LCD
section.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
EXT: When "CAM" , "VIDEO", or
"SDI" is selected in REC
SIGNAL on the SYSTEM MODE
screen, the user bits input to the
TC IN connector are recorded.
When "1394" is selected, the
user bits of signals input to the
DVCPRO/DV connector are
recorded.
If reading fails, USER value is
retained.
TCG: TCG value enters UB.
FRM RATE:
Select the shooting information (e.g.
frame rate) for the camera. For more
information, see [
Frame rate
information recorded in user bits
]
(page 58).
When clips recorded in Native mode
are played back, the frame rate
information recorded in users bits in
the VAUX range is output.
REGEN
: Read out value stored in the
card and record value
continuously.
Note
When the camera-recorder is in 720P
mode, FRM RATE is always selected.
–CUF–
AJ-HPX2000P(VQT1D27-1)E.book 182 ページ 2007年7月30日 月曜日 午後1時31分
182


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HPX 2000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HPX 2000P in the language / languages: English as an attachment in your email.

The manual is 15,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info