99987
130
Zoom out
Zoom in
Previous page
1/134
Next page
130
Chapter 7 Menu description tables
(continued)
7-8-7 TC/UB
TC MODE DF
NDF
For selecting the mode advancing the time
code.
DF: Drop frame
NDF: Non-drop frame
<Note>
When the system frequency is set to 50 Hz,
the mode is the non-drop frame mode.
Item
Variable
range
Remarks
UB MODE USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
For selecting the users bits to record in the
LTC area.
USER:
For recording the user setting values.
(fixed values)
TIME:
For recording the local time.
(hour, minute, second)
DATE:
For recording the local date and time.
(2 digits for year, month, day, time)
EXT:
For recording the users bits of the time
code input in the TC IN connector.
If the users bits cannot be read, the user
setting values are recorded.
TCG:
For recording the value of the time code
generator.
FRM RATE:
For recording the shooting information
(frame rate etc.) of the camera.
REGEN:
For reading the value recorded on the
tape and recording the value
continuously.
<Note>
When the recording format is set to 720P, it
follows the settings of FRAME RATE UB in
7-9-1 <OPTION> screen.
TCG SET HOLD ON
OFF
For selecting ON or OFF for the function that
without fail uses what was previously set as
the TCG value for recording when the TCG
value had been set before the power was
turned off and recording was then performed
after the power was turned back on again.
FIRST REC TC REGEN
PRESET
For selecting whether or not to regenerate
the time code as the value on the tape
during the first recording after the power was
turned on, the cassette was inserted or a
playback or search operation was
performed.
P.OFF LCD
DISPLAY
ON
OFF
For selecting whether or not to set the LCDs
time code and display its count while the
power is off.
ON: The time code can be set and
displayed even while the power is off.
OFF: While the power is off, the power to
the LCD section is turned off, and the
time code can be neither set nor
displayed.
CUF
CUF
Item
Variable
range
Remarks
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
For selecting the users bits to record in the
VITC area.
USER/EXT:
When the UB MODE item is set to EXT,
the users bits of the time core input in the
TC IN connector is recorded.
If it is set to any option other than EXT,
the user setting value is recorded.
TIME:
For recording the local time. (hour,
minute, second)
DATE:
For recording the local date and time. (2
digits for year, month, day, time)
TCG:
For recording the value of the time code
generator.
FRM RATE:
For recording the shooting information
(frame rate etc.) of the camera.
REGEN:
For reading the value recorded on the
tape and recording the value
continuously.
<Note>
When the video system is set to 24P or
24PA, or when the recording format is set to
720P, it follows the settings of FRAME
RATE UB in 7-9-1 <OPTION> screen.
CUF
CUF
CUF
CUF
TC VIDEO
SYNCRO
0
1
2
3
For setting to correct the time code
according to the delay of video signals.
0: Do not correct.
1: To delay the time code to be input
according to the timing of the video
images.
2: To forward the time code to be output
according to the timing of the video
images.
3: To delay the time code to be input and
forward the time code to be output,
respectively, according to the timing of
the video images.
For details, refer to 4-5-4 Externally locking
the time code.
CUF
TC OUT TCG
TCG/TCR
For selecting the time code to be output to
the TC OUT connector.
TCG:
The time code generator value is always
output.
TCG/TCR:
In the EE mode, the time code generator
value is output from the connectors; in the
playback mode, it is the time code reader
value which is output.
CUF
The underlining in the variable range column indicates the setting in the preset
mode.
TC DISP SEL 30F
24F
For selecting the display format to be used
for the frame digits of the time code.
30F: A number up to 30 frames is indicated
in frame digits of the time code.
24F: A number up to 24 frames is indicated
in frame digits of the time code.
<Note>
When the system frequency is set to 50 Hz,
25 frames are displayed.
CUF
REC REVIEW
REGEN
ON
OFF
For selecting whether the time code is
regenerated to the value on the tape or not,
when subsequent recording starts after
setting the RET SW item on the SW MODE
screen to R.REVIEW and pressing the RET
button on the lens or the USER button on
the unit on which the RET SW function is
assigned.
ON: The time code is regenerated to the
value on the tape.
OFF: The time code is not regenerated.
CUF
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:53 PM ページ130
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info