99987
65
Zoom out
Zoom in
Previous page
1/134
Next page
65
4
4-10-2 Setup card operations
To format the setup card, save the setting data on the card
or read the saved data from the card, first perform a menu
operation to open the <CARD READ/WRITE> screen from
the FILE page.
Formatting the setup card
#
< CARD READ/WRITE >
R.SELECT :1
READ
W.SELECT :1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
CONFIG?
YES
#
NO
CONFIG OK
1
Perform the menu operations, and display the “CARD
READ/WRITE” screen.
2
Turn the JOG dial button to move the arrow (cursor) to
the CARD CONFIG item.
4
To proceed with the formatting of the setup card, turn the
JOG dial button to move the arrow (cursor) to YES, and
press the JOG dial button. When the formatting of the
card is completed, the following message appears.
3
When the JOG dial button is pressed, the following
message appears on the screen.
Chapter 4 Adjustments and settings for recording
(continued)
4-10-1 Handling the setup card
An SD memory card (optional accessory) can be used as a
setup card that stores up to eight files of settings menu
specifications.
The setup card can be inserted or removed before or after
the power is switched on.
<Notes>
O The unit supports SD memory cards from 8 MB to 2 GB.
O The SD memory card must be formatted using the unit.
Inserting the setup card
Open the switch cover, position the SD memory card with its
cutout facing up, insert it into the setup card insertion slot,
and close the switch cover.
<Note>
Before inserting the setup card, check that it is pointed in the
correct direction. If the card meets with resistance and if it is
difficult to insert, it may mean that it is the wrong way round
or upside down. Do not force the card into the slot but check
its direction again and insert it properly.
Removing the setup card
Open the switch cover, check that the BUSY lamp is not
lighted, and push the setup card further into the unit. This
causes the card to partially pop out from the insertion slot.
Take hold of the card, remove it, and close the switch cover.
Bear in mind the following points when using and
saving the setup cards.
Avoid high temperatures and high humidity levels.
Keep the cards away from water.
Avoid exposing the cards to electrical charges.
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.23 3:53 PM ページ65
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info