99987
60
Zoom out
Zoom in
Previous page
1/134
Next page
60
Chapter 4 Adjustments and settings for recording
(continued)
Switch the signals output from the MON OUT connector by
using MONI OUT MODE item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
4-8-2 Settings of signals output from MON
OUT connector
Set the video signals output from the MON OUT connector
by using the MONI OUT item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
The HD-Y signals can be used for applying GEN LOCK to
other devices. It is impossible to superimpose markers and
characters on the HD-Y signals.
Even when the tape is replayed, images from the camera are
output.
Set to superimpose characters to the HD SDI signals output
from the MON OUT connector in the MONI OUT CHARA
item of the menu (<OUTPUT SEL> screen on the SYSTEM
SETTING page).
Set the marker and user boxes to superimpose on the output
signals from the MON OUT connector by using the
respective items on the <MONITOR OUT SETTING> screen
(SYSTEM SETTING page) of the menu.
Item
Variable
range
Remarks
MONI OUT HD-SDI
HD-Y
Set video signals output from the MON OUT
connector.
HD-SDI: For outputting the HD SDI signals
HD-Y: For outputting the analog HD-Y
signals
Item
Variable
range
Remarks
MONI OUT MODE CAM
VTR
Switch the signals output from the MON
OUT connector.
CAM: The camera images are output at all
times.
VTR: In the recording or other EE mode,
camera images are output from the
connector; in playback mode, the
VTRs playback signals are output.
Item
Variable
range
Remarks
MONI OUT CHARA ON
OFF
Superimpose characters on the HD SDI
output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
<Note>
This does not link with the VIDEO OUT
CHARACTER switch.
USER BOX WIDTH 1
:
13
:
100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT
1
:
13
:
100
For setting the vertical height of the user
box.
USER BOX H POS 50
:
+00
:
+50
For setting the horizontal position of the user
box center.
USER BOX V POS 50
:
+00
:
+50
For setting the vertical position of the user
box center.
Item
Variable
range
Remarks
MONI OUT CENTR
MARK
OFF
1
2
3
4
For setting the center marker to be
superimposed on the HD SDI output signals
of the MON OUT connector.
OFF: The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
MONI OUT
SAFETY MARK
OFF
1
2
For setting the type of the safety marker
frame to be superimposed on the HD SDI
output signals of the MON OUT connector.
OFF: The safety marker frame is not
displayed.
1: Box
2: Corner frames
MONI OUT FRM
MARK
ON
OFF
For superimposing the frame marker on the
HD SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
MONI OUT USER
BOX
ON
OFF
For superimposing the user box on the HD
SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
SAFETY AREA 80%
:
90%
:
100%
For setting the size of the safety marker.
It is possible to set the size by units of 1%
with a fixed ratio between of width and
height.
FRM SIG 4:3
13:9
14:9
VISTA
For setting the frame marker.
The VISTA setting is 16:8.65.
O The user box can be displayed in any position as a box-
type cursor.
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ60
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info