99987
42
Zoom out
Zoom in
Previous page
1/134
Next page
42
Chapter 4 Adjustments and settings for recording
(continued)
4-5-2 Setting the internal clocks date and
time
1
Set the DISPLAY switch to UB.
2
Press the HOLD button to cause DATE to be displayed
in the display window.
4
Set the date (year/month/day) using the SHIFT button,
UP (+) button and DOWN () button.
5
Press the HOLD button to cause TIME to be displayed in
the display window.
6
Set the time (hour/minutes/seconds) using the SHIFT
button, UP (+) button and DOWN () button.
3
Set the TCG switch to SET.
7
Set the TCG switch to F-RUN or R-RUN. The internal
clock starts marking time as soon as the switch position
is changed.
8
Press the HOLD button to cause TIME ZONE (difference
from the world standard time) to be displayed in the
display window.
10
Set the time difference (hour/minutes) and whether it is
ahead (no display) or behind (“–” display) the world
standard time using the UP (+) button or DOWN ()
button.
Example: When the time difference is 5 hours behind
(New York)
Set 05:00 –”.
The time zone is always stored along with the date and
time in the memory as memo data. While referring to
the table on the right, set whatever applies to the local
time.
9
Set the TCG switch to SET.
Time difference
Region
Time difference
Region
00:00
Greenwich
00:30
01:00
Azores
01:30
02:00
Mid-Atlantic
02:30
New Foundland
03:00
Buenos Aires
03:30
04:00
Halifax
04:30
05:00
New York
05:30
06:00
Chicago
06:30
07:00
Denver
07:30
08:00
Los Angeles
08:30
Marquesas Islands
09:00
Alaska
09:30
10:00
Hawaii
10:30
11:00
Midway Island
11:30
+ 12:00
New Zealand
+ 09:30
Darwin
12:00
Kwajalein
+ 11:30
Norfork Island
+ 13:00 + 10:30
Lord Howe Island
+ 09:00
Tokyo
+ 06:30
Rangoon
+ 11:00
Solomon Islands
+ 08:30
+ 10:00
Guam
+ 07:30
+ 06:00
Dhaka
+ 03:30
Tehran
+ 08:00
Beijing
+ 05:30
Bombay
+ 07:00
Bangkok
+ 04:30
Kabul
+ 03:00
Moscow
+ 00:30
+ 05:00
Islamabad
+ 02:30
+ 04:00
Abu Dhabi
+ 01:30
+ 01:00
Central Europe
+ 02:00
Eastern Europe
+ 12:45
Chatham Island
11
Set the TCG switch to F-RUN or R-RUN to fix the time
zone.
<Notes>
After the date has been set in step 4, the internal clock
starts marking the time as soon as the switch position has
been changed even when the TCG switch is set to F-RUN
or R-RUN.
To cancel the setting in the course of setting the date, time
or time zone, set the TCG switch to F-RUN or R-RUN while
holding down the SHIFT button.
The clock is accurate to a monthly error of approximately
+/ 30 seconds in the power OFF status. If a more
accurate time reading is required, check the time and set it
again when the power is turned on.
If the date or time display has deviated from the local time,
the time zone setting may be off. Check the time zone
setting again. (There is no need to set the date and time
again.)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ42
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info