99989
28
Zoom out
Zoom in
Previous page
1/140
Next page
28
Adjusting the white shading
This unit comes with a function for storing white
shading adjustment values. Up to eight of these
values can be stored in the internal memory.
Alternatively, they can be stored on an SD memory
card.
Using this data, it is possible to quickly reproduce the
appropriate white shading adjustment even after
switching lenses.
<Notes>
O The method below can be used for the white
shading adjustments with most lenses. However,
with some very special lenses, a different
adjustment method may be necessary.
O Even when the white shading has been adjusted,
tinting may occur in the vertical direction near the
lens aperture open position. This is a phenomenon
which is inherent to lenses and optical systems and
is not indicative of malfunctioning.
Storing white shading adjustment values
7
Repeat steps 5 and 6, however this time set the
ZEBRA2 DETECT to 85% and ZEBRA2 to SPOT.
8
Turn the JOG dial button to move the arrow
(cursor) to the <VF DISPLAY> item, and press the
JOG dial button.
4
Perform the menu operations (pages 86 to 88),
and display the “VF DISPLAY” screen of FILM
(CAM) MAIN MENU 2.
5
Turn the JOG dial button to move the arrow
(cursor) to the ZEBRA1 DETECT item, and press
the JOG dial button.
6
Turn the JOG dial button, select 70% and then
press the JOG dial button to enter the setting.
n
< VF DISPLAY >
DISP CONDITION :NORMAL
DISP MODE :3
VF OUT :Y
VF DTL :4
Z
EBRA1 DETECT :080%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
LOW LIGHT LVL :45%
SYNCHRO SCA
N DISP.:deg
ECU MENU DISP. :ON
10
Press the JOG dial button until FILM (CAM)
MAIN MENU 4 is displayed, then turn the JOG
dial button to move the arrow (cursor) to the
WHITE SHADING item, and press the JOG dial
button again.
2222
FILM MAIN MENU4
2222
FILM USER MENU SELECT1
FILM USER MENU SELECT2
FILM USER MENU SELECT3
BLACK SHADING
n
WHITE SHADING
FLARE
COL
ORIMETRY
INITIALIZE
DIAGNOSTIC
EVALUATION
OPTION
9
Turn the JOG dial button to move the arrow
(cursor) to the FILM (CAM) MAIN MENU 2 item.
SHUTTER: OFF
GAIN: L (0 dB)
1
Attach the lens to the camera.
At this stage, do not forget to connect the lens
cable.
2
Set the electronic shutter to OFF, and set the gain
to “L (0 dB).”
3
If the lens is provided with an extender, disengage
the extender function.
02. 英(P26-88) 05.5.18 10:42 ページ28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC27HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC27HP in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info