99989
15
Zoom out
Zoom in
Previous page
1/140
Next page
15
Shooting (recording)/playback
function section (2)
4 OUTPUT (output signal selector)/AUTO KNEE
switch
This is used to select the video signals which are to
be output from the camera unit to the VTR unit,
viewfinder and video monitor.
The operation of the AUTO KNEE function can be
selected using the AUTO KNEE SW item on the
CAMERA SW MODE screen of FILM (CAM) MAIN
MENU 2.
The factory setting is FILM mode so that the AUTO
KNEE function is at OFF.
5 GAIN (gain selector) switch
This is used to select the gain of the video amplifier
in accordance with the lighting status during
shooting. The gain values corresponding to the L,
M and H settings are specified by the setting menu
ahead of time.
If this switch setting is changed while the display
mode is set to “3,” the new setting will appear at the
gain display position on the viewfinder screen.
(Example: “12 dB”)
6 AUTO W/B BAL (automatic white balance/black
balance adjustment) switch
AWB
: This is selected when the white balance is to
be adjusted automatically. When the WHITE
BAL switch 3 is set to “A or B” at this time,
the adjusted value will be stored in memory A
or memory B.
ABB
: This is selected for automatically adjusting the
black balance.
The adjusted value is stored in a dedicated
memory.
Black shading is automatically corrected when
SHD and ABB SW CTRL on the OPTION
screen of FILM (CAM) MAIN MENU 4 are set
to ON and the AUTO W/B BAL switch is
pressed continuously for 8 seconds or more
on the ABB side.
Parts and their functions (continued)
$ OUTPUT/AUTO KNEE switch setting position
BARS
Color bar signals are output.
Use this position in the following
circumstances.
OWhen the video monitor is to be adjusted
OWhen the color bar signals are to be
recorded
CAM.
AUTO KNEE OFF
The pictures shot by the camera are output.
The AUTO KNEE circuit is not activated.
CAM.
AUTO KNEE ON
The pictures shot by the camera are output.
The AUTO KNEE circuit is activated.
AUTO KNEE function
If the level is adjusted to people or scenery for shooting when the
background is very bright, the background becomes subject to
white-out, causing the buildings and scenery in the background to
be blurred. When the AUTO KNEE function is activated in a
situation like this, the background can be reproduced distinctly.
This function is very effective for shooting in the following
situations.
OWhen shooting people in the shade under a clear sky
OWhen shooting people inside a vehicle or a building and
outdoor scenery seen through windows at the same time
OWhen shooting scenes with a high contrast
<Note>
When white balance or black balance are being
automatically adjusted and the switch is pressed
again to either the AWB side or to the ABB side, the
automatic adjustment for the side pressed will be
stopped.
The adjusted value in this case is the value before
automatic adjustment was performed.
6
5 4
01. 英(表1-25) 05.5.18 10:38 ページ15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC27HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC27HP in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info