597942
106
Zoom out
Zoom in
Previous page
1/116
Next page
106
$
HUMID
LCD display The HUMID display lights.
The display will flash for 80 minutes after
the condensation detection is released.
WARNING lamp
O
The lamp lights when condensation has
been detected.
O
The lamp will flash once a second after
condensation detection is released.
Tally lamp The lamp flashes four times a second.
Warning alarm
O
During recording, the alarm sounds four
times a second.
O
At all other times, the alarm sounds
continuously.
Viewfinder The HUMID display lights.
What the warning
indicates
Condensation has formed.
VTR unit’s operation
The VTR units operation differs depending
on the setting selected for HUMID OPE on
the setting menu.
O
When the ON setting has been selected,
the VTR unit continues to operate.
O
When the OFF setting has been
selected, the VTR unit continues with
the recording, but this operation will stop
if the tape sticks.
For 80 minutes after condensation
detection is released, the drum will
rotate however no other operation is
possible.
Remedial action Stop the tape travel, and turn off the
power.
If the HUMID display fails to go off even
when the power is turned off and back on,
wait until it goes off.
$
BATTERY NEAR END
LCD display
WARNING lamp The lamp flashes once a second.
Tally lamp The lamp flashes once a second.
Warning alarm The alarm sounds four times a second.
Viewfinder The BATT display flashes once a second.
What the warning
indicates
The battery is near the end of its charge.
VTR unit’s operation The VTR unit continues to operate.
Remedial action Replace the battery if necessary.
E
BATT
F
This segment flashes.
$
BATTERY END
LCD display
WARNING lamp The lamp lights.
Tally lamp The lamp flashes once a second.
Warning alarm The alarm sounds continuously.
Viewfinder The BATT display lights.
What the warning
indicates
The battery is at the end of its charge.
VTR units operation All operation is stopped and the tape is
unloaded.
Only cassette eject operation is possible.
Remedial action Replace the battery.
E
BATT
F
All the segments flash.
$
TAPE NEAR END
LCD display
WARNING lamp The lamp flashes once a second (during
recording).
Tally lamp The lamp flashes once a second (during
recording).
Warning alarm The alarm sounds once a second (during
recording).
This can be switched on the setting menu.
Viewfinder
O
The remaining tape display flashes
once a second (in the E-E mode).
O
The SAVE lamp flashes in tandem with
the warning alarm (when SAVE&TAPE
has been selected as the setting for the
SAVE LED item on the VTR VF
INDICATOR screen of VTR MENU).
O
=
flashes once a second (three
seconds during recording).
What the warning
indicates
The tape is approaching its end.
VTR units operation The VTR unit continues to operate.
Remedial action Replace the cassette tape if necessary.
E
TAPE
F
This segment flashes.
E
TAPE
F
$
TAPE END
LCD display
WARNING lamp The lamp lights (during stop and in the
standby OFF mode).
Tally lamp The lamp flashes 4 times a second
(during stop and in the standby OFF
mode).
Warning alarm The alarm sounds continuously (during
stop and in the standby OFF mode).
Viewfinder
O
The SAVE display flashes four times a
second (during stop and in the standby
OFF mode).
O
=
lights (during stop and in the
standby OFF mode).
What the warning
indicates
The tape has come to its end.
VTR units operation If recording, playback or fast forwarding is
in progress, the operation is stopped.
Remedial action Rewind the tape.
Alternatively, replace the cassette tape.
All the segments flash.
Warning system
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC 27Ap at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC 27Ap in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info