597942
98
Zoom out
Zoom in
Previous page
1/116
Next page
98
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
Setting menu screens
(VTR MAIN MENU)
The underlining in the variable range column indicates the setting in the preset mode.
Item
Variable
range
Remarks
VF
display
SAVE LED
SAVE&TAPE
SAVE
USER
ENG
For setting the operation
of the SAVE lamp.
SAVE
:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE
:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
When the tape is
approaching its end, it
flashes in tandem with
the warning alarm that
sounds when tape-end is
approaching.
VTR VF INDICATOR screen
The information to be displayed in the viewfinder is set
on this screen.
Item
Variable
range
Remarks
TAPE (IND) ON
OFF
VF
display
USER
ENG
For switching the
remaining tape display to
ON or OFF.
BATTERY (IND) ON
OFF
USER
ENG
For switching the battery
voltage display to ON or
OFF.
LEVEL METER
(IND)
CH1
CH1CH2
OFF
USER
ENG
For selecting what the
audio level meter is to
display.
CH1
:
The level of the CH1
signals only is displayed.
CH1•CH2
:
The levels of both the
CH1 and CH2 signals
are displayed.
CH2
:
The level of the CH2
signals only is displayed.
OFF
: No display.
AUDIO IN (IND) ON
OFF
USER
ENG
For switching the audio
input display to ON or
OFF.
ON
: The audio input is
displayed.
OFF
: The audio input is
not displayed.
TC (IND) ON
OFF
USER
ENG
For switching the time
code display to ON or
OFF.
ON
: The time code is
displayed.
OFF
: The time code is not
displayed.
VTR WARNING
(IND)
ALWAYS
NORMAL
OFF
USER
ENG
For setting when the
VTRs warnings are to be
displayed.
ALWAYS
:
The warning display
always appears when a
warning has occurred.
NORMAL
:
The display appears for
3 seconds after the
warning occurred and for
3 seconds after
recording was started or
completed.
OFF
:
The warning displays do
not appear.
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
Item
Variable
range
Remarks
FRONT MIC
POWER
ON
OFF
VF
display
USER
ENG
ON
: The phantom power
is supplied to the
front microphone.
OFF
: The phantom power
is not supplied to the
front microphone.
MIC LOWCUT
CH1
FRONT
REAR
F&R
OFF
USER
ENG
For setting the high-pass
filter for the CH1 mic input.
FRONT
: The high-pass filter
for the front mic
input is set to ON.
REAR
: The high-pass filter
for the rear mic
input is set to ON.
F&R
: The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
: The high-pass filter
for the CH1 input
is set to OFF.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC 27Ap at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC 27Ap in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info