70
Menu operations
The setting menu operations are performed using the
MENU button and JOG dial button. The menu
configuration is divided into the camera unit’s setting
menus and VTR unit’s setting menus.
It is possible to select the engineer menu which
enables all the setting menu items to be set or,
alternatively, the user menu which consists of
individually tailored menus so that only those menus
which will be used most frequently can be set.
<Note>
The engineer menu is displayed at all times when the
AJ-EC3 extension control unit (optional accessory) is
connected to the unit for operating the unit by remote
control.
User menu
The user menu was set when the unit was shipped.
However, the user can change the configuration of the
menus by selecting only those menus which will be
used most frequently so that they will be tailored to
the user’s individual needs.
Set the user menu on the USER MENU SELECT
screen of the engineer menu. The data settings are
saved in the non-volatile memory for long-term
storage.
Display method
O
When the MENU button is pressed, the camera
unit’s USER menu screen which was set at the time
of shipment is displayed.
O
When the MENU button is pressed again, the VTR
unit’s USER menu screen is displayed.
O
When the MENU button is pressed once more, the
menu screen display is cleared.
Engineer menu
All the setting menu items can be set on this menu.
The data settings are saved in the non-volatile
memory for long-term storage.
Display method
O
Hold down the MENU button for at least 3 seconds.
O
When the MENU button is pressed again, the VTR
unit’s MAIN MENU screen is displayed.
O
When the MENU button is pressed once more, the
menu screen display is cleared.
