597941
126
Zoom out
Zoom in
Previous page
1/138
Next page
126
Updating the driver in the camera
For the latest information on drivers, visit the P2 Support Desk at the following Web sites.
https://eww.pavc.panasonic.co.jp/pro-av/
To update a driver, select PROPERTY on the thumbnail menu and then SYSTEMINFO to check the
camera-recorder’s version, go to the site given above, and download the driver as necessary.
The updating procedure is completed when the downloaded file has been loaded into the camera-recorder
via the SD memory card. For further details on this procedure, go the site given above.
For installation, you must connect the AC adapter.
If you are going to use SD memory cards with this camera-recorder, use only cards which are in
compliance with the SD standard.
Always format SD memory cards on this camera-recorder. If it is necessary to format them on a personal
computer, download the special software program from the site given above before using them.
An SDHC memory card cannot be used for updating.
Condensation
How to find out if there is condensation inside
and what to do about it
If the condensation mark
blinks, condensation
has formed inside the camera-recorder. If this
happens, the power automatically turns off in few
seconds. Even if the condensation mark
is
displayed, the camera-recorder will operate if set
to P2 mode. If the camera-recorder is switched
back to tape mode, the condensation mark
is
displayed again, and the power automatically turns
off in a few seconds.
Take the following action.
(1) Remove the cassette.
No other functions will be possible. It may not
even be possible to remove the cassette tape
depending on the amount of condensation. If
this is the case, wait two to three hours before
removing the cassette.
(2) Wait two to three hours with the cassette holder
open.
The time you need to wait depends on the
amount of condensation and the ambient
temperature.
(3) Turn on the power two to three hours later and
check whether or not the condensation display
has gone off.
To make doubly sure, wait another hour or so
after the condensation display has gone off
before using the camera-recorder again.
Also remember that even when the
condensation display has not appeared,
condensation may be forming.
Condensation builds up gradually so the
condensation display may not appear for 10 to 15
minutes after it has started to form inside.
In very cold areas, the condensation may freeze. If
this happens, it will take another two to three hours
for it to thaw out.
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HVX 200AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HVX 200AP in the language / languages: English as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info