597941
79
Zoom out
Zoom in
Previous page
1/138
Next page
Editing
79
1
2
1394
Digital video equipment (Dubbing)
You can connect a digital video unit equipped with a DV connector and digitally transfer video
and audio signals as well as time code.
Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of the
units.
Before proceeding to connect the unit which uses a 6-pin type 1394 connector,
carefully check the shape of the 1394 cable and the connectors on the 1394
cable. Connecting a connector upside down may damage the parts inside the
unit and cause malfunctioning. Furthermore, connect the 1394 cable to the unit
which uses a 6-pin type 1394 connector first. (
)
When recording signals from an external unit, first check that video signals are
supplied.
While signals from an external unit are being recorded, do not stop output on
the external unit side or disconnect any of cables. This may lead to a failure to
recognize the signals when you do recording again.
While signals from an external unit are being recorded, do not change the format of the signals being
output from the external unit. Doing so may make it impossible to record correctly.
Do not apply force when connecting 1394 cable to 1394 connector as this may damage the connector.
No guarantees are made for the playback images when signals from an external device are recorded.
(Video check level)
The automatic recording function in the DVD unit may not function properly. In a case like this, proceed
with the recording manually.
This camera
1394 cable (optional)
4-pin type
Other Digital video equipment
6-pin
type
4-pin
type
Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of the
units.
Before proceeding to connect the unit which uses a 6-pin type 1394
connector, carefully check the shape of the 1394 cable and the connectors
on the 1394 cable. Connecting a connector upside down may damage the
parts inside the unit and cause malfunctioning. Furthermore, connect the
1394 cable to the unit which uses a 6-pin type 1394 connector first. (
). The above also applies to USB cable as well.
Do not apply force when connecting 1394 cable to 1394 connector as this may
damage the connector.
When connecting to a PC, attach the ferrite core (provided) to the 1394 cable
in such a way that the whole ferrite core fits within about 5 cm from the PC’s
connectors. After threading the cable as shown in the figure on the right, close
the ferrite core until it clicks into place and locks.
6-pin
type
4-pin
type
Ferrite core (provided)
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HVX 200AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HVX 200AP in the language / languages: English as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info