597941
25
Zoom out
Zoom in
Previous page
1/138
Next page
Shooting
25
Basic shooting operations (P2 card)
AUTO MANUAL
2
3
1
CAMERA
MCR VCR
DUBPC
ON
LCD side
Mode button
Mode lamp
REC CHECK
button
Handle START/STOP
button
Lock
release
P2
Shooting in auto mode
1 Turn the POWER switch to ON. (Page 20)
Check that the mode lamp (CAMERA) is
lighted red. If not, press the mode button.
2 Switch the AUTO/MANUAL switch to AUTO
to select auto mode.
“A” appears on the viewfinder and LCD
screens.
The focus, gain, iris and white balance are
adjusted automatically.
3 Press the START/STOP button (Red) on the
POWER switch to start shooting.
Press again to return to the camera to the
shooting standby mode.
Use the handle START/STOP button to make
it easier to shoot from low angles.
Under the following circumstances, even if you
press the STOP button it may take some time until
the writing to the P2 card finishes. For this reason,
the operation will not be acknowledged if you press
the START button too soon.
Stopped after only a short recording time
Stopped immediately after the recording has
moved to a second P2 card
Preparing to shoot using a P2 card
1 Switch the MEDIA switch to “P2”.
2 Set the POWER switch to ON. (Page 20)
3 Lift up the viewfinder and open the card slot
cover.
4 Insert the P2 card securely in the card slot.
There are two card slots.
Be absolutely sure to close the card slot
covers to keep the dust out.
Do not remove the P2 card while the P2 card
access lamps are blinking orange. (Page 26)
3
4
1
P2 TAPE
ON
2
Do not operate the MEDIA switch when the power
is switched ON.
If you attempt to operate the MEDIA switch, the
message “TURN POWER OFF” will be displayed.
In this case, switch OFF the power, and then switch
it ON again.
Lock
release
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HVX 200AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HVX 200AP in the language / languages: English as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info