147
Dimensions and specifications
Chapter 10 Specifications
Memory Card Recorder Unit
Recording format: DVCPRO HD / DVCPRO50 / DVCPRO/DV selectable
Recording audio signal: • PCM digital recording, 48 kHz/16-bits
• 4 CH (DVCPRO HD/DVCPRO50), 2 CH/4 CH selectable (DVCPRO/DV)
Recording/playback time*: • Approx. 8 minutes (When recorded in DVCPRO HD format using one AJ-P2C008HG card
with audio signals recorded on 4 channels)
• Approx. 16 minutes (When recorded in DVCPRO HD format using one AJ-P2C016RG card
with audio signals recorded on 4 channels)
Recording media: P2 Card (4GB, 8GB, 16GB are available) × 4 slots
Recording file: MXF file (FAT32 file system)
SD memory card slot: • Complies with SD format (MMC cannot be used)
• 1 slot (for reading and writing camera setup data)
* The recording time represents one shot continuously recorded on a P2 card. The recording time may be shorter depending on
the number of shots recorded.
■HD video system
Sampling frequency: Y: 74.25 MHz, PB/PR: 37.125 MHz
Quantizing: 8 bits
Video compression system: DCT + variable-length code
Video compression rate: 1/6.7
Video recording bit rate: 100 Mbps
■Audio system
Sampling frequency: 48 kHz
Quantizing: 16 bits/4 CH
Head room: 20 dB/18 dB (selectable)
Video Input/Output
GEN LOCK IN:
BNC × 1, 1.0 V p-p, 75
Ω
COMPONENT OUT:
D4 terminal (component), Y: 1.0 V p-p, 75
Ω, PB/PR: 0.7 V p-p, 75 Ω
VIDEO OUT:
BNC × 1, 1.0 V p-p, 75
Ω
SDI OUT:
• BNC × 1, 0.8 V p-p, 75
Ω
• HD: compliant with SMPTE 292M/296M/299M
• SD: compliant with SMPTE 259M-C/272M-A/ITU-R.BT656-4
Audio Input/Output
MIC IN: • XLR × 2 (FRONT 1, FRONT 2)
• high impedance
• + 48 V (available)
• MIC: –40 dBu/–50 dBu/–60 dBu (selectable on menu)
AUDIO IN: • XLR × 2 (REAR 1, REAR 2)
• high impedance
• LINE/MIC / + 48 V (selectable)
• LINE: 0 dB
• MIC: –50 dBu/–60 dBu (selectable on menu)
AUDIO OUT:
Pin jack × 2 (CH 1, CH 2), Output: 316 mV, 600
Ω
Headphone: ø3.5 mm stereo mini jack × 1
Internal speaker: 28 mm diameter × 1