597938

Panasonic AG-HPX 500P Manual

132
Zoom out
Zoom in
Previous page
1/152
Next page
132
Connecting to External Devices Using the IEEE1394 Connector (PC mode)
Chapter 8 Connecting to External Devices
Connecting to External Devices Using the
IEEE1394 Connector (PC mode)
Connecting an external PC or hard disk to this unit via
IEEE1394 makes it possible to use the P2 cards in this
unit as mass storage.
Procedures for establishing
a connection with a PC
1
Connect the IEEE1394 cable to the 1394
connector.
<Note>
• An IEEE1394 cable is not supplied. Purchase a
commercially available cable.
• Use a Macintosh computer running Apple
®
Mac
OS
®
X in version 10.3 or later.
• This operation is not guaranteed under
Windows
®
.
• Pay attention to cable connector orientation
during connection.
1394
2
Open the setting menu <OTHER
FUNCTIONS> screen and set the menu
option PC MODE to 1394DEVICE.
For details on menu operation, refer to [Using
the menus] (page 116).
PUSH MENU TO RETURN
1394 CONTROL
1394 CMD SEL
PC MODE
ACCESS LED
ALARM
SAVE LED
CLOCK SET
OTHER FUNCTIONS
OFF
REC_P
1394DEVICE
OFF
OFF
SAVE
USER FILE
3
Press the MENU button to end menu
operations.
4
Press the MODE button to turn on the
MCR mode LED and keep the button
held down.
• This lights the PC mode LED indicating that
the unit is in the PC mode.
5
Edit data on the PC.
• For details, refer to the Operating Instructions
supplied with the PC.
<Note>
• Do not remove P2 cards when using an IEEE1394
connection.
• Place the driver icon in the trash before replacing a
card.
• Place all driver icons in the trash and check that the
1394DEVICE-DISCONNECT message appears before
disconnecting the 1394 cable.
• Recording, playback and clip thumbnail operations
cannot be performed when the PC MODE is set to
1394DEVICE.
• PC data cannot be saved on a P2 card.
When the unit is connected to an IEEE1394 device,
“1394DEVICE CONNECT” is displayed at the center
of the viewfinder. “DISCONNECT” appears when the
devices are not correctly connected.
6
To exit the PC mode, turn the POWER
switch OFF.
PC
6-pin connector
1394 cable
(separately sold)
Apple Macintosh
… 132 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 500P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 500P in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info