597937
152
Zoom out
Zoom in
Previous page
1/166
Next page
152
Chapter 9 Maintenance and Inspections
(Continued from the previous page)
Priority
Warning
type
LCD or viewfinder
indication
Tally lamp
Warning
lamp
Alarm
tone
*6
Warning description
and recording/playback
operation
Countermeasures
8
1394
connection
error
1394 INITIAL ERROR Blinks
red
Blinks 4
times per
second
Blinks 4
times per
second
No
The DVCPRO/DV cable
has become disconnected
or multiple devices are
connected.
Check the camera
and device
connections,
reconnect them if
necessary, then turn
the power off and
back on again.
9
Battery
nearly empty
The last bar in the battery
level indication blinks (This
indication appears also
when MENU indications
have been turned OFF.)
Blinks 1 time
per second
Blinks 1 time
per second
No
The battery is near depletion.
Operation continues.
*5
Replace the battery
as necessary.
10
P2 card
nearly fully
recorded
The P2CARD level indicator
blinks.
Blinks 1 time
per second
during
recording.
Blinks 1 time
per second
during
recording.
No
Less than 2 minutes is left on
the P2 cards (level indicator
shows 1 minute or less). This
warning appears only during
recording.
Replace or insert
additional P2 cards.
*1 P2 SYSTEM ERROR cause indication
P2 MICON ERROR: The P2 microprocessor does not respond.
P2 CONTROL ERROR: A P2 recording control error has occurred.
CAM MICON ERROR: The camera microprocessor does not respond.
*2 REC WARNING cause indication
CARD ERROR*: P2CARD error (* indicates the number of the slot of the card with the error.) Stops recording.
REC RAM OVERFLOW: Overflow of recording RAM. Stops recording.
PULL DOWN ERROR: 24P, 30P video pulldown error. Recording continues.
ERROR: Other recording errors (When an attempt is made to record 1000 or more clips on one P2 card.)
*3 Perform either of the following procedures to cancel this warning.
Press a playback control button.
Press the THUMBNAIL button.
Remove the P2 card and insert another card.
*4 Perform either of the following procedures to cancel this warning.
Press the REC button.
Press a playback control button.
Press the THUMBNAIL button.
Remove all cards.
*5 When NEAR END CANCEL is set to ON, you can press the DISP/MODE CHK button to cancel the alarm.
*6 When the alarm sounds, audio is not output to the camera speakers or earphones. The DISP/MODE CHK button cancels
only the alarm tone when pressed during an alarm.
152


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 300P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 300P in the language / languages: English as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info