597937
140
Zoom out
Zoom in
Previous page
1/166
Next page
140
Chapter 8 Connecting to External Devices
3
Terminating USB mode
Use one of the following three methods.
Set the camera POWER switch to OFF.
Set the PC MODE option in the SYSTEM SETUP
screen to OFF.
Press the USER button to which PC MODE has
been assigned.
USB host mode
This mode allows you to connect the camera to a hard
disk drive that supports USB 2.0 to save card data, view
thumbnails of the stored clips and write data back to P2
cards.
Switching to USB Host Mode
1
Set the menu option PC MODE SELECT in the
SYSTEM SETUP screen to USB HOST and set
PC MODE to ON.
This engages the USB host mode.
The USB LED on the camera lights in USB host
mode and USB HOST CONNECT appears in
the center of the viewfinder. When a normal
connection cannot be established with the hard
disk, the USB LED flashes and DISCONNECT
appears in the viewfinder.
When PC MODE is assigned to a user button,
press that user button to switch between USB host
mode and normal mode. However, a user button
cannot be used for switching in the thumbnail
mode.
For details, refer to [Assigning functions to USER
Buttons] (page 53).
2
Press the THUMBNAIL button.
The thumbnail screen opens.
Make sure that USB HOST appears at the bottom
right of the screen.
When the camera is connected to a hard disk
drive, the HDD icon appears at the top right of
the screen. If the icon lights red this indicates that
data cannot be copied to or from the hard disk.
Check hard disk drive type.
For details on hard disk drives, refer to [Thumbnail
Screen] (page 102).
NOTE
The USB host mode allows playback of P2 cards but
not recording of camera video or external input.
And clips on the hard disk must be written back to a P2
card before they can be played back.
For details, refer to [Writing back data to P2 cards]
(page 143).
3
Terminating USB host mode.
Use one of the following three methods.
• Set the camera POWER switch to OFF.
Close the thumbnail screen and set the menu
option PC mode in the SYSTEM SETUP screen to
OFF.
Press the USER button to which PC MODE has
been assigned.
*1
*1 In thumbnail mode, pressing a user button will
not terminate USB host mode.
Using USB host mode
Supported hard disks
A hard disk drive that supports the USB 2.0 interface
P2 STORE (the optional AJ-PCS060G hard drive)
NOTE
This camera supports USB bus power (5.V, 0.5A) but some
hard disks may not be able to use USB bus power. Such hard
disk drives should be provided with a separate power supply.
Do not connect a hard disk to hubs or other connections
that involve multiple units even if it is not powered on. Do
not connect other devices to the hard disk drive via a hub or
other device.
This unit does not support hard disk drives that are 2 TB or
larger.
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 300P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 300P in the language / languages: English as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info