597933
112
Zoom out
Zoom in
Previous page
1/122
Next page
112
Before calling for service
Power supply
There’s no power. Make sure the battery and AC adapter are connected properly.
Check the connections again.
P23
Power shuts off for no
apparent reason.
To prevent the battery from running down needlessly, the camera-
recorder automatically turns off when the camera-recorder has
been left in the recording pause mode for more than 5 minutes.
Check the settings in the OTHER FUNCTIONS screen, POWER
SAVE.
P110
Power goes off as soon as
it is turned on.
The battery may have run out.
If the remaining battery charge display is blinking or
appears, the battery has run out.
Either recharge the battery or replace the discharged battery with a
fully charged one.
P21
Battery
The battery runs down
quickly.
Make sure the battery is fully charged.
Keep charging until the AC adapter’s CHARGE lamp goes out.
Are you using the battery in a cold place?
The battery is affected by the ambient temperature. Its operating
time is reduced in low-temperatures.
The battery may have reached the end of its service life. The
battery will become unchargeable. The battery has a certain
service life which varies depending on how the battery is used. If
the battery operates only for a short period even when it is charged
adequately, it has reached the end of its service life.
P21
The battery cannot be
charged.
The battery cannot be charged if the DC cable is connected.
Disconnect it.
P21
The remaining battery
capacity is not displayed
correctly.
The remaining battery capacity display is merely a guideline. To
ensure that remaining battery capacity is displayed correctly, use
the battery completely from a fully-charged state, and charge
the battery again. (Remaining battery capacity may still not be
displayed correctly if the battery has been used for long periods in
high or low temperatures, or if the battery has been recharged a
large number of times.)
Shooting
Cannot start shooting. Make sure the POWER switch is ON. P26
Cannot focus automatically. Make sure the camera is in manual focus mode. You can focus
automatically when the auto focus mode is selected.
You may be shooting a scene where it is difficult to bring the subject
into focus in the auto focus mode.
If this is the case, focus in the manual focus mode.
It may be hard to bring the subject into focus when
both close and distant objects are to be shot
shooting through a dirty window
shooting in a dark place
there are sparkling or shiny objects around the subject
the subject is moving fast
shooting a scene with minimal contrast
P40
Images do not focus when
zooming.
When using a macro range for the focus control, the zoom is set
to the wide end or the telephoto end, and even if the image is
focused, zooming may cause the image to become unfocused.
For details about the macro display, see page 89.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HMC 40P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HMC 40P in the language / languages: English as an attachment in your email.

The manual is 19,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info